 #jsDisabledContent { display:none; } My Account |  Register |  Help Flag as Inappropriate This article will be permanently flagged as inappropriate and made unaccessible to everyone. Are you certain this article is inappropriate?          Excessive Violence          Sexual Content          Political / Social Email this Article Email Address:

Article Id: WHEBN0000537058
Reproduction Date:

 Title: Radius of curvature (applications) Author: World Heritage Encyclopedia Language: English Subject: Collection: Publisher: World Heritage Encyclopedia Publication Date:

The distance from the center of a circle or sphere to its surface is its radius. For other curved lines or surfaces, the radius of curvature at a given point is the radius of a circle that mathematically best fits the curve at that point. In the case of a surface, the radius of curvature is the radius of a circle that best fits a normal section.

## Contents

• Explanation 1
• Formula 2
• Derivation 2.1
• Applications and examples 3
• Radius of curvature applied to measurements of the stress in the semiconductor structures 4

## Explanation

Imagine driving a car on a curvy road on a completely flat surface. At any one point along the way, lock the steering wheel in its position, so that the car thereafter follows a perfect circle. The car will, of course, deviate from the road, unless the road is also a perfect circle. The radius of that circle the car makes is the radius of curvature of the curvy road at the point at which the steering wheel was locked. The more sharply curved the road is at the point you locked the steering wheel, the smaller the radius of curvature.

## Formula

If \gamma : \mathbb{R} \rightarrow \mathbb{R}^n is a parameterized curve in \mathbb{R}^n then the radius of curvature at each point of the curve, \rho : \mathbb{R} \rightarrow \mathbb{R}, is given by

\rho = \frac{|\gamma'|^3}{\sqrt{|\gamma'|^2 \; |\gamma''|^2 - (\gamma' \cdot \gamma'')^2}}.

As a special case, if f(t) is a function from \mathbb{R} to \mathbb{R}, then the curvature of its graph, \gamma(t) = (t, f(t)), is

\rho(t)=\frac{|1+f '^2(t)|^{3/2}}{|f ' '(t)|}.

### Derivation

Let \gamma be as above, and fix t. We want to find the radius \rho of a parameterized circle which matches \gamma in its zeroth, first, and second derivatives at t. Clearly the radius will not depend on the position (\gamma(t)), only on the velocity (\gamma'(t)) and acceleration (\gamma''(t)). There are only three independent scalars that can be obtained from two vectors v and w, namely v·v, v·w, and w·w. Thus the radius of curvature must be a function of the three scalars |\gamma'^2(t)|\,\!, |\gamma''^2(t)|\,\! and \gamma'(t) \cdot \gamma''(t).

The general equation for a parameterized circle in \mathbb{R}^n is

g(u) = A \cos(h(u)) + B \sin(h(u)) + C \,\!

where C \in \mathbb{R}^n is the center of the circle (irrelevant since it disappears in the derivatives), A,B \in \mathbb{R}^n are perpendicular vectors of length \rho (that is, A\cdot A = B\cdot B = \rho^2 and A\cdot B = 0), and h : \mathbb{R} \rightarrow \mathbb{R} is an arbitrary function which is twice differentiable at t.

The relevant derivatives of g work out to be

\begin{array}{lll} |g'|^2 &=& \rho^2 (h')^2 \\ g' \cdot g'' &=& \rho^2 h' h'' \\ |g''|^2 &=& \rho^2 \left( (h')^4 + (h'')^2 \right) \end{array}

If we now equate these derivatives of g to the corresponding derivatives of \gamma at t we obtain

\begin{array}{lll} |\gamma'^2(t)| &=& \rho^2 h'^2(t) \\ \gamma'(t) \cdot \gamma''(t) &=& \rho^2 h'(t) h''(t) \\ |\gamma''^2(t)| &=& \rho^2 (h'^4(t) + h''^2(t)) \end{array}

These three equations in three unknowns (\rho, h'(t) and h''(t)) can be solved for \rho, giving the formula for the radius of curvature:

\rho(t) = \frac{|\gamma'^3(t)|}{\sqrt{|\gamma'^2(t)| \; |\gamma''^2(t)| - (\gamma'(t) \cdot \gamma''(t))^2}}

or, omitting the parameter (t) for readability,

\rho = \frac{|\gamma'|^3}{\sqrt{|\gamma'|^2 \; |\gamma''|^2 - (\gamma' \cdot \gamma'')^2}}.

## Radius of curvature applied to measurements of the stress in the semiconductor structures

Stress in the semiconductor structure involving evaporated thin films usually results from the thermal expansion (thermal stress) during the manufacturing process. Thermal stress occurs because film depositions are usually made above room temperature. Upon cooling from the deposition temperature to room temperature, the difference in the thermal expansion coefficients of the substrate and the film cause thermal stress.

Intrinsic stress results from the microstructure created in the film as atoms are deposited on the substrate. Tensile stress results from microvoids in the thin film, because of the attractive interaction of atoms across the voids.

The stress in thin film semiconductor structures results in the buckling of the wafers. The radius of the curvature of the stressed structure is related to stress tensor in the structure, and can be described by modified Stoney formula. The topography of the stressed structure including radii of curvature can be measured using optical scanner methods. The modern scanner tools have capability to measure full topography of the substrate and to measure both principal radii of curvature, while providing the accuracy of the order of 0.1% for radii of curvature of 90 m and more.

References:

1. ^ http://flipchips.com/tutorial/process/controlling-stress-in-thin-films/ and references within