World Library  
Flag as Inappropriate
Email this Article

Edger

Article Id: WHEBN0004573452
Reproduction Date:

Title: Edger  
Author: World Heritage Encyclopedia
Language: English
Subject: String trimmer, Lawn care, Post hole digger, Broadcast spreader, Gardening tools
Collection: Cutting Tools, Gardening Tools, Lawn Care
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Edger

An edger

An edger (also known as a lawn edger or stick edger) is a garden tool used to cleanly separate a lawn from a walkway or other paved surface, such as a concrete sidewalk or asphalt path. Edgers may be manual or automated, typically employing a small gasoline (petrol) engine or an electric motor, while newer gas-powered models have four-stroke engines. An edger enables a user to create a clear separation between the lawn and the walkway. It helps to impart a finished appearance that is neater than can be achieved by merely mowing over the border of the lawn and walkway (which frequently permits tufts of low-growing grass to hang over onto the walkway, resulting in an irregular or ragged appearance).

In operation, a manual edger usually includes a broad hemispherical blade attached to an elongated handle, which the operator uses to drive the blade into the turf directly alongside the hard surface. In addition, the blade may have a flat top to allow the operator to step on the blade, driving it deep into the lawn and turf in order to clear a space between the lawn and the hard surface. In contrast, powered edgers may operate on any of a variety of methods, such as rotating wheel blades or thrashing wheels, which also operate to define a clear separation between a lawn and a hard surface.

A basic gasoline lawn edger consists of an engine, belt tensioner, pulleys, and a blade. Most lawn edgers incorporate a belt and two pulleys (one on the engine and the other on the blade head) and a belt tensioner used for going deeper into the grass and gaining more RPM. Some gasoline edgers also have a device called a "robot head," used for adjusting the pitch of an edger head between the horizontal and the vertical. Some edger brands, such as King O' Lawn, have a blade clutch to avoid the user pulling up on the belt tensioner to stop the blade (usually a small lever that can be pulled up with the operator's foot). The drive system on a common edger is a belt drive from the two pulleys. Husqvarna uses a worm gear shaft drive system. One disadvantage to the shaft drive system is lower engine power. A chain drive would be ineffective and cause damage to the blade, sprocket, and engine if a solid object was hit. One advantage to the belt drive system is that the belt will skip when hitting objects. The blade on an edger is usually made from cast steel.

History

The gasoline lawn edger was invented by Louis Faas Sr. of King o' Lawn Inc in the 1940s. The first gasoline edgers used a Briggs & Stratton 1.5 horsepower (1.1 kW) engine. Using just basic components, the first edgers were very basic with a very small engine. Brands such as McLane and Cooper Klipper would follow several years later.

Power sources

Most gasoline edgers use a four-stroke engine with 2 or 3.5 horsepower (1.5 or 3 kW), although some early edgers used

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.