World Library  
Flag as Inappropriate
Email this Article


Article Id: WHEBN0015873175
Reproduction Date:

Title: Le-5  
Author: World Heritage Encyclopedia
Language: English
Subject: Expander cycle (rocket), H-IIB, H-I, Cryogenic rocket engine
Publisher: World Heritage Encyclopedia


The LE-5 liquid rocket engine and its derivative models were developed in Japan to meet the need for an upper stage propulsion system for the H-I and H-II series of launch vehicles. It is a bipropellant design, using LH2 and LOX. Primary design and production work was carried out by Mitsubishi Heavy Industries. In terms of liquid rockets, it is a fairly small engine, both in size and thrust output, being in the 20,000 lbf (89,000 N) and the more recent models the 30,000 lbf (130 kN) thrust class. The motor is capable of multiple restarts, due to a spark ignition system as opposed to the single use pyrotechnic or hypergolic igniters commonly used on some contemporary engines. Though rated for up to 16 starts and 40+ minutes of firing time, on the H-II the engine is considered expendable, being used for one flight and jettisoned. It is sometimes started only once for a nine-minute burn, but in missions to GTO the engine is often fired a second time to inject the payload into the higher orbit after a temporary low Earth orbit has been established.

The original LE-5 was built as a third stage engine for the H-I launch vehicle. It used a fairly conventional gas generator cycle.


The LE-5A was a heavily redesigned version of the LE-5 intended for use on the new H-II launch vehicle’s second stage. The major difference is that the operation of the engine was switched from the gas generator to expander bleed cycle. The LE-5A was the first expander bleed cycle engine to be put into operational service. Cryogenic liquid hydrogen fuel for the cycle is drawn through tubes and passages in both the engine’s nozzle and combustion chamber where the hydrogen heats up incredibly while simultaneously cooling those components. The heating of the initially cold fuel causes it to become significantly pressurized and it is utilized to drive the turbine for the propellant pumps.


The LE-5B was a further modified version of the LE-5A. The changes focused on lowering the per-unit cost of the engine while continuing to increase reliability. The modifications veered towards simplification and cheaper production where possible at the cost of actually lowering the specific impulse to 447 seconds, the lowest of all three models. However, it produced the highest thrust of the three and was significantly cheaper. The primary change from the 5A model was that the 5B’s expander bleed system circulated fuel around only the combustion chamber as opposed to both the chamber and the nozzle in the 5A. Alterations to the combustion chamber cooling passages and constituent materials were made with special emphasis on effective heat transfer to allow this method to be successful.


After flight F5 of LE-5B-2 development summary (Japanese). The upgrade resulted in reduction of vibration of the upper stage by half.


LE-5 Model Specifications
LE-5 Model (units) LE-5 LE-5A LE-5B LE-5B-2
Operational Cycle - Gas Generator Expander Bleed
Expander Bleed
Expander Bleed
Rated Thrust kN (lbs) 102.9 (23,100) 121.5 (27,300) 137.2 (30,800) 144.9 (32,500)
Mixture Ratio Oxidizer to Fuel 5.5 5 5 5
Expansion Ratio - 140 130 110 110
Specific Impulse (Isp) Seconds 450 452 447 447
Chamber Pressure MPa (PSI) 3.65 (529) 3.98 (577) 3.58 (519) 3.78 (548)
LH2 Rotational Speed rpm 50,000 51,000 52,000 53,504
LOX Rotational Speed rpm 16,000 17,000 18,000 18,560
Length m (ft) 2.68 (8.84) 2.69 (8.88) 2.79 (9.21) 2.79 (9.21)
Weight kg (lbs) 255 (562) 248 (547) 285 (628) 290 (639)
Throttleable down to no no 60% 60%

See also


  • Japanese World Heritage Encyclopedia LE-5B (in Japanese)
  • Encyclopedia Astronautica info page on the LE-5
  • Encyclopedia Astronautica info page on the LE-5A
  • Encyclopedia Astronautica info page on the LE-5B
  • Studies on Expander Bleed Cycle Engines for Launchers, AIAA Paper
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.