World Library  
Flag as Inappropriate
Email this Article

Multimachine

Article Id: WHEBN0008862712
Reproduction Date:

Title: Multimachine  
Author: World Heritage Encyclopedia
Language: English
Subject: Open-source hardware, Machine tools, List of open-source hardware projects, Machine tool builder, Machine tool
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Multimachine

MultiMachine

The multimachine is an all-purpose open source machine tool that can be built inexpensively by a semi-skilled mechanic with common hand tools, from discarded car and truck parts, using only commonly available hand tools and no electricity. Its size can range from being small enough to fit in a closet to one hundred times that size. The multimachine can accurately perform all the functions of an entire machine shop by itself.

The multimachine was first developed as a personal project by Pat Delaney, then grew into an open source project organized via a Yahoo! group. The 2,600 member support group that has grown up around its creation is made up of engineers, machinists, and experimenters who have proven that the machine works. As an open-source machine tool that can be built cheaply on-site, the Multimachine could have many uses in developing countries. The multimachine group is currently focused on the humanitarian aspects of the multimachine, and on promulgating the concept of the multimachine as a means to create jobs and economic growth in developing countries.

The multimachine first became known to a wider audience as the result of the 2006 Open Source Gift Guide article on the Make magazine website, in which the multimachine was mentioned under the caption "Multimachine - Open Source machine tool".[1]

Contents

  • Uses 1
  • Accuracy 2
  • Construction 3
  • References 4
  • External links 5

Uses

As a general-purpose machine tool that includes the functions of a milling machine, drill press, and lathe, the multimachine can be used for many projects important for humanitarian and economic development in developing countries:

  • Agriculture: Building and repairing irrigation pumps and farm implements
  • Water supplies: Making and repairing water pumps and water-well drilling rigs.
  • Food supplies: Building steel-rolling-and-bending machines for making fuel efficient cook stoves and other cooking equipment
  • Transportation: Anything from making cart axles to rebuilding vehicle clutch, brake, and other parts.
  • Education: Building simple pipe-and-bar-bending machines to make school furniture, providing "hands on" training on student-built multimachines that they take with them when they leave school.
  • Job creation: A group of specialized but easily built multimachines can be combined to form a small, very low cost, metal working factory which could also serve as a trade school. Students could be taught a single skill on a specialized machine and be paid as a worker while learning other skills that they could take elsewhere.

Accuracy

The design goals of the multimachine were to create an easily built machine tool, made from "junk," that is nonetheless all-purpose and accurate enough for production work. It has been reported to be able to make cuts within a tenth (one ten-thousandth of an inch), which means that in at least some setups it can equal commercial machine tool accuracy.

In almost every kind of machining operation, either the work piece or the cutting tool turns. If enough flexibility is built into the parts of a machine tool involved in these functions, the resulting machine can do almost every kind of machining operation that will physically fit on it. The multimachine starts with the concept of 3-in-1 machine tools—basically a combination of metal lathe, mill and drill press—but adds many other functions. It can be a 10-in-1 (or even more) machine tool.

Construction

At a high-level, the multimachine is built using vehicle engine blocks combined in a LEGO-like fashion. It utilizes the cylinder bores and engine deck to provide accurate surfaces. Since cylinder bores are bored exactly parallel to each other and at exact right angles to the cylinder head surface, multimachine accuracy begins at the factory where the engine block was built. In the most common version of the multimachine, one that has a roller bearing spindle, this precision is maintained during construction with simple cylinder re-boring of the #3 cylinder to the size of the roller bearing outside diameter (OD) and re-boring the #1 cylinder to fit the overarm OD. These cylinder-boring operations can be done in almost any engine shop and at low cost. An engine machine shop provides the most inexpensive and accurate machine work commonly done anywhere and guarantees that the spindle and overarm will be perfectly aligned and at an exact right angle to the face (head surface) of the main engine block that serves as the base of the machine. Use a piece of pipe made to fit the inner diameter of the bearings as the spindle. A three-bearing spindle is used because the "main" spindle bearings just "float" in the cylinder bore so that the third bearing is needed to "locate" the spindle, act as a thrust bearing, and support the heavy pulley. The multimachine uses a unique way of clamping the engine blocks together that is easily built, easily adjusted, and very accurate. The multimachine makes use of a concrete and steel construction technique that was heavily used in industry during the First World War and resurrected for this project.

References

  1. ^ http://blog.makezine.com/archive/2006/10/multimachine-open-source.html

External links

  • Open source machine website
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.