World Library  
Flag as Inappropriate
Email this Article

Silicon on insulator

Article Id: WHEBN0000747290
Reproduction Date:

Title: Silicon on insulator  
Author: World Heritage Encyclopedia
Language: English
Subject: Athlon 64 X2, Phenom II, Multigate device, Microtechnology, Espresso (microprocessor)
Collection: Microtechnology, Semiconductor Structures, Semiconductor Technology
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Silicon on insulator

SIMOX process

Silicon on insulator (SOI) technology refers to the use of a layered silicon–insulator–silicon substrate in place of conventional silicon substrates in semiconductor manufacturing, especially microelectronics, to reduce parasitic device capacitance, thereby improving performance.[1] SOI-based devices differ from conventional silicon-built devices in that the silicon junction is above an electrical insulator, typically silicon dioxide or sapphire (these types of devices are called silicon on sapphire, or SOS). The choice of insulator depends largely on intended application, with sapphire being used for high-performance radio frequency (RF) and radiation-sensitive applications, and silicon dioxide for diminished short channel effects in microelectronics devices.[2] The insulating layer and topmost silicon layer also vary widely with application.[3]

Contents

  • Industry need 1
  • SOI transistors 2
  • Manufacture of SOI wafers 3
  • Use in the microelectronics industry 4
  • Use in high-performance Radio-Frequency (RF) applications 5
  • Use in photonics 6
  • See also 7
  • References 8
  • External links 9

Industry need

Smart Cut process

The implementation of SOI technology is one of several manufacturing strategies employed to allow the continued miniaturization of microelectronic devices, colloquially referred to as extending Moore's Law. Reported benefits of SOI technology relative to conventional silicon (bulk CMOS) processing include:[4]

  • Lower parasitic capacitance due to isolation from the bulk silicon, which improves power consumption at matched performance.
  • Resistance to latchup due to complete isolation of the n- and p-well structures.
  • Higher performance at equivalent VDD. Can work at low VDD's.[5]
  • Reduced temperature dependency due to no doping.
  • Better yield due to high density, better wafer utilization.
  • Reduced antenna issues
  • No body or well taps are needed.
  • Lower leakage currents due to isolation thus higher power efficiency.
  • Inherently radiation hardened ( resistant to soft errors ), thus reducing the need for redundancy.

From a manufacturing perspective, SOI substrates are compatible with most conventional fabrication processes. In general, an SOI-based process may be implemented without special equipment or significant retooling of an existing factory. Among challenges unique to SOI are novel metrology requirements to account for the buried oxide layer and concerns about differential stress in the topmost silicon layer. The threshold voltage of the transistor depends on the history of operation and applied voltage to it, thus making modeling harder. The primary barrier to SOI implementation is the drastic increase in substrate cost, which contributes an estimated 10–15% increase to total manufacturing costs.[6]

SOI transistors

An SOI MOSFET is a semiconductor device (MOSFET) in which a semiconductor layer such as silicon or germanium is formed on an insulator layer which may be a buried oxide (BOX) layer formed in a semiconductor substrate.[7][8][9] SOI MOSFET devices are adapted for use by the computer industry. The buried oxide layer can be used in SRAM memory designs.[10] There are two type of SOI devices: PDSOI (partially depleted SOI) and FDSOI (fully depleted SOI) MOSFETs. For a n-type PDSOI MOSFET the sandwiched p-type film between the gate oxide (GOX) and buried oxide (BOX) is large, so the depletion region can't cover the whole p region. So to some extent PDSOI behaves like bulk MOSFET. Obviously there are some advantages over the bulk MOSFETs. The film is very thin in FDSOI devices so that the depletion region covers the whole film. In FDSOI the front gate (GOX) supports less depletion charges than the bulk so an increase in inversion charges occurs resulting in higher switching speeds. Other drawbacks in bulk MOSFETs, like threshold voltage roll off, higher sub-threshold slop body effect, etc. are reduced in FDSOI since the source and drain electric fields can't interfere due to the BOX. The main problem in PDSOI is the "floating body effect (FBE)" since the film is not connected to any of the supplies.

Manufacture of SOI wafers

SiO2-based SOI wafers can be produced by several methods:

  • SIMOX - Separation by IMplantation of OXygen – uses an oxygen ion beam implantation process followed by high temperature annealing to create a buried SiO2 layer.[11][12][13]
  • Wafer bonding[14][15] – the insulating layer is formed by directly bonding oxidized silicon with a second substrate. The majority of the second substrate is subsequently removed, the remnants forming the topmost Si layer.
    • One prominent example of a wafer bonding process is the Smart Cut method developed by the French firm Soitec which uses ion implantation followed by controlled exfoliation to determine the thickness of the uppermost silicon layer.
    • NanoCleave is a technology developed by Silicon Genesis Corporation that separates the silicon via stress at the interface of silicon and silicon-germanium alloy.[16]
    • ELTRAN is a technology developed by Canon which is based on porous silicon and water cut.[17]
  • Seed methods[18] - wherein the topmost Si layer is grown directly on the insulator. Seed methods require some sort of template for homoepitaxy, which may be achieved by chemical treatment of the insulator, an appropriately oriented crystalline insulator, or vias through the insulator from the underlying substrate.

An exhaustive review of these various manufacturing processes may be found in reference[1]

Use in the microelectronics industry

IBM began to use SOI in the high-end RS64-IV "Istar" PowerPC-AS microprocessor in 2000. Other examples of microprocessors built on SOI technology include AMD's 130 nm, 90 nm, 65 nm, 45 nm and 32 nm single, dual, quad, six and eight core processors since 2001.[19] Freescale adopted SOI in their PowerPC 7455 CPU in late 2001, currently Freescale is shipping SOI products in 180 nm, 130 nm, 90 nm and 45 nm lines.[20] The 90 nm Power Architecture based processors used in the Xbox 360, PlayStation 3 and Wii use SOI technology as well. Competitive offerings from Intel however continues to use conventional bulk CMOS technology for each process node, instead focusing on other venues such as HKMG and Tri-gate transistors to improve transistor performance. In January 2005, Intel researchers reported on an experimental single-chip silicon rib waveguide Raman laser built using SOI.[21]

As for the traditional foundries, on July 2006 TSMC claimed no customer wanted SOI,[22] but Chartered Semiconductor devoted a whole fab to SOI.[23]

Use in high-performance Radio-Frequency (RF) applications

In 1990, Peregrine Semiconductor began development of an SOI process technology utilizing a standard 0.5 μm CMOS node and an enhanced sapphire substrate. Its patented silicon on sapphire (SOS) process is widely used in high-performance RF applications. The intrinsic benefits of the insulating sapphire substrate allow for high isolation, high linearity and electro-static discharge (ESD) tolerance. Multiple other companies have also applied SOI technology to successful RF applications in smartphones and cellular radios.[24]

Use in photonics

SOI wafers are widely used in silicon photonics.[25] The crystalline silicon layer on insulator can be used to fabricate optical waveguides and other passive optical devices for integrated optics. The crystalline silicon layer is sandwiched between the buried insulator (Silicon oxide, Sapphire etc.) and top cladding of air (or Silicon oxide or any other low refractive index material). This enables propagation of electromagnetic waves in the waveguides on the basis of total internal reflection.

See also

References

  1. ^ a b Celler, G. K.; Cristoloveanu, S. (2003). "Frontiers of silicon-on-insulator" (PDF).  
  2. ^ Marshall, Andrew; Natarajan, Sreedhar (2002). SOI design: analog, memory and digital techniques. Boston: Kluwer.  
  3. ^ Colinge, Jean-Pierre (1991). Silicon-on-Insulator Technology: Materials to VLSI. Berlin: Springer Verlag.  
  4. ^ Silicon-on-insulator - SOI technology and ecosystem - Emerging SOI applications by Horacio Mendez, Executive Director of the SOI Industry Consortium, April 9, 2009
  5. ^ http://www.infotech-enterprises.com/fileadmin/infotech-enterprises.com/assets/downloads/White_Papers/Infotech_SOI_Paper_Oct_2010.pdf
  6. ^ IBM touts chipmaking technology
  7. ^ United States Patent 6,835,633 SOI wafers with 30-100 Ang. Buried OX created by wafer bonding using 30-100 Ang. thin oxide as bonding layer
  8. ^ United States Patent 7,002,214 Ultra-thin body super-steep retrograde well (SSRW) FET devices
  9. ^ Ultrathin-body SOI MOSFET for deep-sub-tenth micron era; Yang-Kyu Choi; Asano, K.; Lindert, N.; Subramanian, V.; Tsu-Jae King; Bokor, J.; Chenming Hu; Electron Device Letters, IEEE; Volume 21, Issue 5, May 2000 Page(s):254 - 255
  10. ^ United States Patent 7138685 " Vertical MOSFET SRAM cell" describes SOI Buried Oxide (BOX) structures and methods for implementing enhanced SOI BOX structures.
  11. ^ U.S. Patent 5,888,297 Method of fabricating SOI substrate Atsushi Ogura, Issue date: Mar 30, 1999
  12. ^ U.S. Patent 5,061,642 Method of manufacturing semiconductor on insulator Hiroshi Fujioka, Issue date: Oct 29, 1991
  13. ^ SIMOX-SOI Technology: Ibis Technology
  14. ^ "SemiConductor Wafer Bonding: Science and Technology" by Q.-Y. Tong & U. Gösele, Wiley-Interscience, 1998, ISBN 978-0-471-57481-1
  15. ^ U.S. Patent 4,771,016 Using a rapid thermal process for manufacturing a wafer bonded soi semiconductor, George Bajor et al., Issue date: Sep 13, 1988
  16. ^ http://www.sigen.com/
  17. ^ ELTRAN - Novel SOI Wafer Technology, JSAPI vol.4
  18. ^ U.S. Patent 5,417,180
  19. ^ Chip Architect: Intel and Motorola/AMD's 130 nm processes to be revealed
  20. ^ Process Technology
  21. ^ Rong, Haisheng; Liu, Ansheng; Jones, Richard; Cohen, Oded; Hak, Dani, Nicolaescu, Remus; Fang, Alexander; Paniccia, Mario (January 2005). "An all-silicon Raman laser" (PDF). Nature 433: 292–294.  
  22. ^ TSMC has no customer demand for SOI technology - Fabtech - The online information source for semiconductor professionals
  23. ^ Chartered expands foundry market access to IBM's 90nm SOI technology
  24. ^ Madden, Joe. "MMPAs, Envelope Tracking, Antenna Tuning, FEMs, and MIMO"Handset RFFEs: (PDF). Mobile Experts. Retrieved 2 May 2012. 
  25. ^ "Silicon photonics: an introduction" by Graham T. Reed, Andrew P. Knights. WIley. Page 111

External links

  • SOI Industry Consortium - a site with extensive information and education for SOI technology
  • SOI IP portal - A search engine for SOI IP
  • AMDboard - a site with extensive information regarding SOI technology
  • Advanced Substrate News - a newsletter about the SOI industry, produced by Soitec.
  • MIGAS '04 - The 7th session of MIGAS International Summer School on Advanced Microelectronics, devoted to SOI technology and devices.
  • MIGAS '09 - 12th session of the International Summer School on Advanced Microelectronics: "Silicon on Insulator (SOI) Nanodevices"
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.