World Library  
Flag as Inappropriate
Email this Article

Wall plate

Article Id: WHEBN0002581277
Reproduction Date:

Title: Wall plate  
Author: World Heritage Encyclopedia
Language: English
Subject: Wood products, Bush carpentry, Lumber, Timber framing, Purlin
Collection: Architectural Elements, Building, Carpentry, Structural System, Woodworking
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Wall plate

A typical Wall section in Platform framing
1. Cripple
2. Window Header
3. Top Plate / Upper Wall Plate
4. Window Sill
5. Stud
6. Sill Plate / Sole Plate / Bottom Plate

A plate or wall plate is a horizontal, structural, load-bearing member in wooden building framing.

Contents

  • Timber framing 1
  • Platform framing 2
  • External links 3
  • References 4

Timber framing

A plate in timber framing is "A piece of Timber upon which some considerable weight is framed...Hence Ground-Plate...Window-plate [obsolete]..." etc.[1] Also called a wall plate,[2] raising plate,[3] or top plate,[4] An exception to the use of the term plate for a large, load-bearing timber in a wall is the bressummer, a timber supporting a wall over a wall opening (see also: lintel).

The terms sole plate or sill plate are used for the members at the bottom of a wall at the foundation but are most often just called a sole or sill without the word plate. Other load bearing timbers use the term plate but are not in the wall such as crown plate, a purlin-like beam carried by crown posts in roof framing, and a purlin plate which supports common rafters.

Platform framing

In platform framing there are three types of wall plates and are located at the top and bottom of a wall section, and the two hold the wall studs parallel and spaced at the correct interval. Each type continues in a piecewise fashion around the whole perimeter of the structure.

  • Sill plates — a lower wall plate which is bolted or strapped securely to the top of a foundation wall or concrete slab. These hold the house down against heavy winds. Normally, "J-bolts" are placed in the curing concrete after the mason levels the foundation and finishes dressing the concrete or anchor bolts are drilled into the concrete foundation. Newer systems of galvanized strapping with a J-bolt like anchor placed in the concrete allows the builder to avoid the mating step of drilling the sill plates for the bolts.
  • Lower wall plates, base plate, floor plate, or bottom plate[5] — a second lower wall plate to which the wall studs are through nailed and which is the bottom of the wall section when assembled as a rectangular assembly. On an upper story, the lower wall plate is nailed to the platform of the supporting floor. The supporting platform is being supported by the wall studs of the even lower walls below.
  • Upper wall plate, top plate or ceiling plate — upper wall plate which is fastened along the top of the wall studs, before the wall is lifted into position and on which the platform of the next story or the ceiling and roof assembly rest and are attached. A second layer of dimensional lumber is always fastened to the top plates of the erected walls so that no joints overlap, providing greatly increased stability. In North America this is known as a "double top plate" and the process of installing the second top plate is known as "top plating."

External links

  • John H. Lienhard (1993). "Balloon Frame Houses".  
  • The MMC Glossary 2008 - The Modern Construction Glossary of MMC and offsite terms including Framed Construction.
  • Canadian Wood Council - Wood building design tools, case studies and references.
  • How Your House Works House Framing and Structure overview.
  • USDA Forest Products Laboratory Lists of Publications
    • Wood handbook—Wood as an engineering material
  • Design and Construction of Low Energy Houses in Saskatchewan

References

  1. ^ Moxon, Joseph. Mechanick exercises, or, The doctrine of handy-works. The 2nd ed. London: Printed and sold by J. Moxon, 1693, 1701. 163. Print.
  2. ^ Oxford English Dictionary Second Edition on CD-ROM (v. 4.0) © Oxford University Press 2009
  3. ^ Sturgis, Russell. Sturgis' illustrated dictionary of architecture and building: an unabridged reprint of the 1901-2 edition. 1901. Reprint. Mineola, N.Y.: Dover, 1989. 159. Print.
  4. ^ Sherwood, Gerald E., and Robert C. Stroh. Wood-frame house construction. Washington, D.C.: U.S. Dept. of Agriculture, Forest Service :, 1989. 54. Print.
  5. ^ Sherwood, Gerald E., and Robert C. Stroh. Wood-frame house construction. Washington, D.C.: U.S. Dept. of Agriculture, Forest Service :, 1989. 54. Print.
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.