Belay devices

Belay devices are mechanical pieces of climbing equipment used to control a rope during belaying.[1] They are designed to improve belay safety for the climber by allowing the belayer to manage their duties with minimal physical effort. With the right belay device, a small, weak climber can easily arrest the fall of a much heavier partner. Belay devices act as a friction brake, so that when a climber falls with any slack in the rope, the fall is brought to a stop.

Belay devices generally have two modes of operation: in the first mode, the rope is relatively free to be paid in/out by the belayer. The second mode, which allows the belayer to arrest the descent of a climber in the case of a fall, functions by forcing the rope(s) into tight bends where the rope rubs against the belay device and/or against itself. This rubbing slows the rope, but also generates heat. Some types of belay devices can transition between these modes without the belayer taking any action, others require the belayer to hold or pull the rope in a particular direction to arrest a fall.

Belay devices usually attach to the harness of the belayer via a carabiner, and are usually made of aluminium or an alloy. Some belay devices can also be used as descenders for a controlled descent on a rope, that is abseiling or rappeling.

Many belay devices can be used to control either one rope, or two ropes in parallel. There are many reasons why the two-rope option might be chosen by a climber, including the consideration of reducing rope drag.

Types of belay devices


This is a device that you feed a bight (loop) of rope through a hole or Aperture and then hook it into a locking carabiner on the harness.

Sticht plate

The Sticht plate was the first mechanical rope brake, named after its designer, Fritz Sticht. It consists of a small metal plate with a slot that allows a bight of rope to pass through to a locking carabiner and back out. This locking carabiner is clipped to the belayer who is then able to lock the rope at will.

Some plates had two slots for double ropes. The slots could also be different sizes for different diameter ropes e.g. 9mm and 11mm. A wide wire spring may be attached on one side to help keep the plate away from the brake carabiner to ease feeding and taking in rope. A smaller hole is often present for accessory cord to carry the device. Sticht plates are typically forged from aluminium alloy in a round disc shape, although other shapes such as rounded rectangles were also made.

Although any belaying plate with one or two slots is often called a Sticht plate, Fritz Sticht originally patented the design with Hermann Huber for Salewa GmbH in 1970, who sold it as the Salewa Sticht Bremse (Sticht Brake).

Sticht plates have become less popular since more modern designs provide smoother control over the rope and are less prone to jamming, especially when doubling as a descender.

Tubular devices

This type of device generally has a tubular or rectangular shape. It is an evolution of the Sticht plate's concept by creating more surface area to dissipate heat and the ability to create sharper angles which creates a stronger degree of friction which has greater stopping power. As a result this is generally the most common type of belay device used. This type of device goes by multiple trade names including Black Diamond ATC (Air Traffic Controller), DMM Bug, Trango Pyramid.

Besides arresting the fall of a climber, these devices can also be used for rappelling.

Figure eight

Sometimes just called "eight", this device is most commonly used as a descender. A figure eight can be used for belaying, and indeed there are some which are designed specifically for belaying, however they are not generally popular due to the tendency to twist the rope. There are also variations on this design including DMM's "cardiac arrester" which does the same thing but is shaped like a heart. It is designed to help stop rope twisting. Figure eights, although not the most common belay device, are still frequently found in use. For most uses, a tubular style belay device is easier and safer to use.

Assisted braking

Referred to as assisted braking or, incorrectly as 'auto-locking', under the right conditions these devices, either mechanical or static, use the load on the rope to prevent the brake line from being pulled through the device. Use of such belay devices should never be instructed as self- or auto-locking, but as assisted braking. There do exist rare conditions where these devices' braking functions may not apply correctly, though accident statistics show that these incidents are often user-error. An icy, muddy, old, too-thin of a rope, or possibly other conditions, such as insufficient training and experience, may affect a device's braking function.

Guide plate

A Guide Plate, also known as an auto-blocking belay device,[2] is a metal plate with an elongated slot for the bight to go through and then a carabiner is attached so that when pull from the climber occurs the carabiner will be pulled to lock off the device.

Tubular device variant

Main article: Reverso

A similar device to the traditional tubular belay device which has two extra loops; normally situated on the front and back of the device. When the device is attached directly to an anchor point with the use of a second carabiner through the larger of the two loops it performs a similar stopping function to that created with the guide plate. The device is also able to be used as a standard tubular device when belaying from the harness. There are many versions of this device available, though out of these the two most well known devices are the Petzl Reverso and the Black Diamond ATC-Guide.


Main article: Grigri (climbing)

Statistically, by sales volume, the Gri Gri is the most popular mechanically assisted-braking belay device. A Gri-gri, when properly used, assists in braking the rope with a camming device that clamps the rope in the event of a fall. Because of the braking mechanism, modified belay techniques are widely used, though Petzl, the devices manufacturer, has approved only certain techniques for instructing new belayers. Gri-gri's reportedly give a harder catch than a regular belay device because they allow little to no rope slippage when catching a fall. They are a proprietary design by Petzl. Trango sells a similar assisted braking belay device called the Cinch that is rated to work on ropes 9.4 to 11 mm (the Gri-Gri is rated from 10 to 11 mm: the newer,smaller "Gri-Gri 2" is rated from 8.2 to 11 mm).

Using a Gri-gri to bring up a second on a traditional anchor is however less favorable than other belay devices because the Gri-gri gives a more static catch with little to no rope slippage. This increases the amount of force exerted on the anchor which, in turn, increases the chance of anchor failure.

Self-belay devices

Main article: Self-locking device

Self-belay devices are designed to allow solo climbing where the climber wears the belay device, or secures it to a fixed object on the ground. These devices automatically lock without any intervention when placed under sufficient load (during a fall), but allow rope to move relatively freely whilst climbing.

See also


External links

  • Interactive Belay Device Buying Guide
  • Rock Climbing Belay Device - reviews and general information
  • Belay Device for Rock Climbing - How To Choose
  • Collection of Sticht plates
  • Sticht plates page on the German World Heritage Encyclopedia

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.