World Library  
Flag as Inappropriate
Email this Article

Cessna 187

Article Id: WHEBN0014664220
Reproduction Date:

Title: Cessna 187  
Author: World Heritage Encyclopedia
Language: English
Subject: List of Cessna models, Cessna aircraft, Cessna Model A, Cessna EC-1, Cessna EC-2
Publisher: World Heritage Encyclopedia

Cessna 187

Cessna Model 187
Role Light Aircraft
National origin United States
Manufacturer Cessna
First flight 22 April 1968
Retired 1968
Status Scrapped
Number built 1

The Model 187 was a proposed light aircraft by United States manufacturer Cessna in the 1970s. As the lighter Model 177 had been intended to replace the 172, so the 187 was intended to replace the 182.


The Model 187 shape was similar to the 177, with a high cantilever wing (its design was a mix of the cantilever wings on the 177 and the 210), all-moving tailplane, and tubular main landing gear struts. In a departure from the 177 approach, the 187's stabilator was mounted atop the vertical tail in a T-tail configuration.

Cabin doors on the 187 resembled the wide doors of the 177, and since there was no wing strut to impede its movement, the door opened to more than 90°. The windshield was more highly sloped than that of the 182, similar to the deep slope of the 177 windshield. The aft fuselage included a rear window with slope similar to that of the 177. There was room for four people, and a baggage area, with a separate access door on the pilot's (left) side. The engine was the same as the 182's engine, the Continental O-470 which delivered 230 hp (170 kW), with an 84-inch (2,100 mm) constant-speed propeller.

Prototype Stage

The program entered initial design in 1965, before the Model 177 had been officially introduced. Construction of the first prototype began in early 1968. Only one flying aircraft, with serial number 666 and tail number N7167C, was completed. Static test articles were also constructed, but were not tested to their full strength before the program was canceled.

First flight was on 22 April 1968.

Program Cancellation

There were a few problems during flight testing, such as blanking and partial stalling of the stabilator during stalls, an empty weight greater than that of the airplane it was intended to replace, and noseheaviness. However, the greatest obstacle to the program's acceptance was that the more complex wing's manufacturing cost would have pushed the aircraft price out of the acceptable marketing niche. The program was therefore canceled and the prototype was destroyed that same year.[1]

See also

Related development
Aircraft of comparable role, configuration and era


  1. ^ Phillips, Edward H: Wings of Cessna, Model 120 to the Citation III, Flying Books, 1986. ISBN 0-911139-05-2
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.