World Library  
Flag as Inappropriate
Email this Article

Coffee ring effect

Article Id: WHEBN0003697368
Reproduction Date:

Title: Coffee ring effect  
Author: World Heritage Encyclopedia
Language: English
Subject: Convection, Phase transitions, Physical phenomena, Fluid mechanics, Physical chemistry
Collection: Colloidal Chemistry, Convection, Fluid Mechanics, Phase Transitions, Physical Chemistry, Physical Phenomena
Publisher: World Heritage Encyclopedia

Coffee ring effect

An example of the coffee ring effect, shown using an evaporated drop of coffee.

In physics, a "coffee ring" is a pattern left by a puddle of particle-laden liquid after it evaporates. The phenomenon is named for the characteristic ring-like deposit along the perimeter of a spill of coffee. It is also commonly seen after spilling red wine. The mechanism behind the formation of these and similar rings is known as the coffee ring effect or in some instances, the coffee stain effect.


  • Flow mechanism 1
  • Determinants of size and pattern 2
  • Applications 3
  • References 4

Flow mechanism

Writing in Nature, Robert D. Deegan of The University of Chicago and coworkers show that the pattern is due to capillary flow induced by the differential evaporation rates across the drop: liquid evaporating from the edge is replenished by liquid from the interior.[1] The resulting edgeward flow can carry nearly all the dispersed material to the edge.

Follow-up work by Hu and Larson suggests the evaporation induces a Marangoni flow inside a droplet. The flow, if strong, actually redistributes particles back to the center of the droplet. Thus, for particles to accumulate at the edges, the liquid must have a weak Marangoni flow, or something must occur to disrupt the flow.[2] For example, surfactants can be added to reduce the liquid's surface tension gradient, disrupting the induced flow. Hu and Larson do mention that water has a weak Marangoni flow to begin with, which is then reduced significantly by natural surfactants. Later H. Burak Eral and colleagues in Physics of Complex Fluids group in University of Twente evoked alternating voltage electrowetting to suppress coffee stains noninvasively (i.e. no need to add surface active materials).[3] This method shakes the contact line by alternatively increasing and decreasing contact angle effectively depinning the contact line as the droplet evaporates. Furthermore, with appropriate choice of excitation frequency internal flow fields can be generated counteracting the capillary flow increasing the efficiency of the suppression. In 2013, researchers from the Karlsruhe Institute of Technology, Germany revealed that in an inkjet printing process the coffee ring effect can also be suppressed by a rapid viscosity increase during drying.[4]

Recently, Byung Mook Weon and Jung Ho Je of Pohang University of Science and Technology showed an observation of reverse particle motion that repels the coffee-ring effect because of the capillary force near the contact line.[5] The reversal takes place when the capillary force prevails over the outward coffee-ring flow by the geometric constraints.

Determinants of size and pattern

Recent work of Bhardwaj et al. showed the pH of the solution of the drop also influences the final deposit pattern.[6] The transition between these patterns is explained by considering how DLVO interactions such as the electrostatic and Van der Waals forces modify the particle deposition process.

At the microscopic level, Shen, Ho, and Wong of University of California, Los Angeles suggest that the lower limiting size of a coffee ring is dependent on the time scale competition between the liquid evaporation and the movement of suspended particles.[7] When the liquid evaporates much faster than the particle movement near a three-phase contact line, coffee ring cannot be formed successfully. Instead, these particles will disperse uniformly on a surface upon complete liquid evaporation. For suspended particles of size 100 nm, the minimum diameter of the coffee ring structure is found to be 10 μm, or about 10 times smaller than the width of human hair. In a study published in Nature in August 2011, a team of University of Pennsylvania physicists has shown that the shape of particles in the liquid is responsible for coffee ring effect.[8][9] On porous substrates, the competition among infiltration, particle motion and evaporation of the solvent governs the final deposition morphology.[10]

The self-pinning of the contact line by particle confinement was studied by Byung Mook Weon and Jung Ho Je of Pohang University of Science and Technology. They suggested that a critical linear packing fraction is required for the self-pinning by a balance between the spreading and the net capillary forces at the contact line.[11]


The coffee ring effect is utilized in convective deposition by researchers wanting to order particles on a substrate using capillary-driven assembly. Utilized by various groups including Velev[12] at North Carolina State University and Gilchrist[13] at Lehigh University using principles developed by Dimitrov and Nagayama,[14] replacing a stationary droplet with an advancing meniscus drawn across the substrate. This process differs from dip-coating in that evaporation drives flow along the substrate as opposed to gravity.

Dongmao Zhang et al. have utilized coffee-ring drying pattern to pre-concentrate the protein solutions prior to Raman analysis in so called Drop Coating Deposition Raman (DCDR) technique.[15][16][17]


  1. ^ R. D. Deegan, O. Bakajin, T. F. Dupont, G. Huber, S. R. Nagel, T. A. Witten (1997). "Capillary flow as the cause of ring stains from dried liquid drops".  
  2. ^ Hua Hu, Ronald Larson (2006). "Marangoni Effect Reverses Coffee-Ring Depositions".  
  3. ^ Eral H.B., Mampallil-Agustine D., Duits M.H.G., Mugele F. (2011). "Suppressing the coffee stain effect: how to control colloidal self-assembly in evaporating drops using electrowetting".  
  4. ^ A. Friederich, J. R. Binder, W. Bauer (2013). "Rheological Control of the Coffee Stain Effect for Inkjet Printing of Ceramics".  
  5. ^ B. M. Weon and J. H. Je (2010). "Capillary force repels coffee-ring effect".  
  6. ^ Bhardwaj; et al. (2010). "Self-Assembly of Colloidal Particles from Evaporating Droplets: Role of DLVO Interactions and Proposition of a Phase Diagram".  
  7. ^ Xiaoying Shen,  
  8. ^ P. J. Yunker, T. Still, M. A. Lohr, A. G. Yodh (2011). "Suppression of the coffee-ring effect by shape-dependent capillary interactions".  
  9. ^ "Coffee-ring effect explained". Retrieved 21 August 2011. 
  10. ^ Min Pack, Han Hu, Dong-Ook Kim, Ying Sun (2015). "Colloidal drop deposition on porous substrates: competition among particle motion, evaporation and infiltration".  
  11. ^ B. M. Weon and J. H. Je (2013). "Self-pinning by colloids confined at a contact line".  
  12. ^ B. G. Prevo, O. D. Velev (2004). "Controlled rapid deposition of structured coatings from micro-and nanoparticle suspensions".  
  13. ^ P. Kumnorkaew, Y. K. Ee, N. Tansu, J. F. Gilchrist (2008). "Investigation of the Deposition of Microsphere Monolayers for Fabrication of Microlens Arrays".  
  14. ^ A. S. Dimitrov, K. Nagayama (1995). "Steady-state unidirectional convective assembling of fine particles into two-dimensional arrays".  
  15. ^ Dongmao Zhang, Yong Xie, Melissa F. Mrozek, Corasi Ortiz, V. Jo Davisson, Dor Ben-Amotz (2003). "Raman Detection of Proteomic Analytes".  
  16. ^ Dongmao Zhang, Melissa F. Mrozek, Yong Xie, Dor Ben-Amotz (2004). "Chemical Segregation and Reduction of Raman Background Interference Using Drop Coating Deposition".  
  17. ^ Dongmao Zhang, Karthikeshwar Vangala, DongPing Jiang, Sige Zou, Tibor Pechan (2010). "Drop Coating Deposition Raman Spectroscopy of Fluorescein Isothiocyanate Labeled Protein".  
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.