World Library  
Flag as Inappropriate
Email this Article

Flushometer

Article Id: WHEBN0027993387
Reproduction Date:

Title: Flushometer  
Author: World Heritage Encyclopedia
Language: English
Subject: Toilet, William Elvis Sloan, Toilets, Toilet seat cover, Privatization of public toilets
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Flushometer

A flushometer is a metal water-diverter that uses an inline handle to flush toilets or urinals. It was invented by William Elvis Sloan.[1]

Function

It uses water pressure from the water supply system rather than gravity from a raised tank like in previous models.

"A diaphragm separates a pressure chamber from the main water supply. A narrow passageway leads from the main water supply into the pressure chamber. It is the narrowness of this passage that meters the flow by slowing repressurizing of the pressure chamber after the action of a flush. The diaphragm technology allows the flush valve to open and let water into the bowl. A main cylinder valve operates up and down. A groove in this cylinder allows water from the main supply to flow through when it is in a mid position. The valve is shut off at both its top and bottom positions. A second valve, placed within the main cylinder valve, releases the water in the topmost pressure chamber when the flush lever is activated, sending the main cylinder valve shooting upwards. The topmost pressure chamber slowly refills through its narrow passageway, pushing the valve cylinder back down gradually. A flush occurs while it is in its open mid positions. Because the water is gradually shut off, slower water at the end of the cycle that will not activate the siphon serves to refill the bowl. The valve cannot be kept open by holding the flush lever in the activated position, wasting water, because this only sends the main cylinder valve all the way up to its topmost shutoff position. A flush can only occur when the valve is in one of its mid positions."[1]

Advantages and disadvantages

A flushometer is usually installed in a commercial setting, as it provides a high-pressure and better-performing wash and flush than a normal gravity toilet. However, a flushometer requires that the building have a larger supply line than is normally found in small to medium residential buildings, and therefore such buildings typically use tank-type toilets.

References

  1. ^ a b US 977562, Sloan, William, "Valve", issued December 6, 1910 
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.