World Library  
Flag as Inappropriate
Email this Article


Article Id: WHEBN0003142960
Reproduction Date:

Title: Geo600  
Author: World Heritage Encyclopedia
Language: English
Subject: Holometer, Interferometric gravitational wave detector, Gravitational wave telescopes, Bernard F. Schutz, Squeezed coherent state
Collection: Gravitational Wave Telescopes
Publisher: World Heritage Encyclopedia


Organization LIGO Scientific Collaboration
Location(s) Sarstedt, Germany
Wavelength 43–10000 km
(30–7000 Hz)
Built 1995
Telescope style Gravitational-wave Observatory

GEO600 is a gravitational wave detector located near Sarstedt in the South of Hanover, Germany. This instrument, and its sister interferometric detectors, when operational, are some of the most sensitive gravitational wave detectors ever designed. They are designed to detect relative changes in distance of the order of 10−21, about the size of a single atom compared to the distance from the Sun to the Earth. GEO600 is capable of detecting gravitational waves in the frequency range 50 Hz to 1.5 kHz.[1] Construction on the project began in 1995.[2]


  • Hardware 1
    • Suspensions and seismic isolation 1.1
    • Optics 1.2
    • Advanced features 1.3
  • Sensitivity and measurements 2
  • Data/ Einstein@home 3
  • Joint science run with LIGO 4
  • Claimed link between GEO600 detector noise and holographic properties of spacetime 5
  • See also 6
  • References 7
  • External links 8


GEO600 is a Michelson interferometer. It consists of two 600 meter long arms, which the laser beam passes twice, so that the effective optical arm length is 1200 m. The major optical components are located in an ultra-high vacuum system. The pressure is in the range of 10−8 mbar.[1]

Suspensions and seismic isolation

For precise measurements, the optics must be isolated from ground motion and other influences from the environment. For this reason, all ground-based interferometric gravitational wave detectors suspend their mirrors as multi-stage pendulums. For frequencies above the pendulum resonance frequency, pendulums provide a good isolation against vibrations. All the main optics of GEO600 are suspended as triple pendulums, to isolate the mirrors from vibrations in the horizontal plane. The uppermost and the intermediate mass are hung from cantilever springs, which provide isolation against vertical movement. On the uppermost mass are six coil- magnet actuators that are used to actively dampen the pendulums.[3] Furthermore, the whole suspension cage sits on piezo crystals. The crystals are used for an ‘active seismic isolation system’. It moves the whole suspension in the opposite direction of the ground motion, so that ground motion is cancelled.[4]


The main mirrors of GEO600 are cylinders of fused silica with a diameter of 18 cm and a height of 10 cm. The beam splitter (with dimensions of 26 cm diameter and 8 cm thickness) is the only transmissive piece of optics in the high power path, therefore it was made from special grade fused silica. Its absorption has been measured to be smaller than 0.25 ppm/cm.[5]

Advanced features

GEO600 uses many advanced techniques and hardware that are planned to be used in the next generation of ground based gravitational wave detectors:

  • Signal recycling: An additional mirror at the output of the interferometer forms a resonant cavity together with the end mirrors and thus increases a potential signal.
  • Monolithic suspensions: The mirrors are suspended as pendulums. While steel wires are used for secondary mirrors, GEO’s main mirrors are hanging from so called ‘monolithic’ suspensions. This means that the wires are made from the same material as the mirror: fused silica. The reason is that fused silica has less mechanical losses, and losses lead to noise.
  • Electrostatic drives: Actuators are needed to keep the mirrors in their position and to align them. Secondary mirrors of GEO600 have magnets glued to them for this purpose. They can then be moved by coils. Since gluing magnets to mirrors will increase mechanical losses, the main mirrors of GEO600 use electrostatic drives (ESDs). The ESDs are a comb-like structure of electrodes at the back side of the mirror. If a voltage is applied to the electrodes, they produce an inhomogeneous electric field. The mirror will feel a force in this field.
  • Thermal mirror actuation system: A circular heater is sitting behind the far east mirror. Due to inhomogeneous thermal expansion the radius of curvature of the mirror changes. The heater allows thermal tuning of the mirror’s radius of curvature.[6]
  • Output Mode Cleaner (OMC): An additional cavity at the output of the interferometer in front of the photodiode. Its purpose is to filter out light that does not potentially carry a gravitational wave signal.[7]
  • Squeezing: Squeezed vacuum is injected into the dark port of the beam splitter. The use of squeezing can improve the sensitivity of GEO600 above 700 Hz by a factor of 1.5.[9]

A further difference to other projects is that GEO600 has no arm cavities.

Sensitivity and measurements

The sensitivity for gravitational wave strain is usually measured in amplitude spectral density (ASD). The peak sensitivity of GEO600 in this unit is 2×10−22 1/√Hz at 600 Hz.[10] At high frequencies the sensitivity is limited by the available laser power. At the low frequency end, the sensitivity of GEO600 is limited by seismic ground motion.

Data/ Einstein@home

Not only the output of the main photodiode is registered, but also the output of a number of secondary sensors, for example photodiodes that measure auxiliary laser beams, microphones, seismometers, accelerometers, magnetometers and the performance of all the control circuits. These secondary sensors are important for diagnosis and to detect environmental influences on the interferometer output. The data stream is partly analyzed by the distributed computing project ‘Einstein@home’, software that volunteers can run on their computer.

From September 2011, both VIRGO and the LIGO detectors will be shut down for upgrades, leaving GEO600 as the only operating large scale laser interferometer searching for gravitational waves.[11]

Joint science run with LIGO

In November 2005, it was announced that the LIGO and GEO instruments have begun an extended joint science run. The three instruments (LIGO's instruments are located near Livingston, Louisiana and on the Hanford Site, Washington in the U.S.) will collect data for more than a year, with breaks for tuning and updates. This will be the fifth science run of GEO600. No signals were detected on previous runs, but the sensitivity of the instruments (and the quality of the data analysis) is continually improving, and once the data from the current run are analyzed, it is hoped that they will perhaps reveal the arrival at Earth of two unambiguous bursts of gravitational waves. This would constitute the first direct detection of gravitational radiation.

Claimed link between GEO600 detector noise and holographic properties of spacetime

On January 15, 2009, it was reported in New Scientist that some yet unidentified noise that was present in the GEO600 detector measurements might be because the instrument is sensitive to extremely small quantum fluctuations of space-time affecting the positions of parts of the detector.[12] This claim was made by Craig Hogan, a scientist from Fermilab, on the basis of his own theory of how such fluctuations should occur motivated by the holographic principle.[13]

The New Scientist story states that Hogan sent his prediction of "holographic noise" to the GEO600 collaboration in June 2008, and subsequently received a plot of the excess noise which "looked exactly the same as my prediction". However, Hogan knew before that time that the experiment was finding excess noise. Hogan's article published in Physical Review D in May 2008 states: "The approximate agreement of predicted holographic noise with otherwise unexplained noise in GEO600 motivates further study."[14] Hogan cites a 2007 talk from the GEO600 collaboration which already mentions "mid-band 'mystery' noise", and where the noise spectra are plotted.[15] A similar remark was made ("In the region between 100 Hz and 500 Hz a discrepancy between the uncorrelated sum of all noise projections and the actual observed sensitivity is found.") in a GEO600 paper submitted in October 2007 and published in May 2008.[16]

It is also a very common occurrence for gravitational wave detectors to find excess noise that is subsequently eliminated. According to Karsten Danzmann, the GEO600 principal investigator, "The daily business of improving the sensitivity of these experiments always throws up some excess noise (...). We work to identify its cause, get rid of it and tackle the next source of excess noise."[12] Additionally, some new estimates of the level of holographic noise in interferometry show that it must be much smaller in magnitude than was claimed by Hogan.[17]

See also

  • Gravitational radiation
  • Fermilab Holometer
  • LIGO, for the two American gravitational interferometric detectors.
  • eLISA, for the space-based ESA gravitational wave detector
  • VIRGO, for the European gravitational interferometric detector.
  • TAMA 300, for a Japanese gravitational interferometric detector.
  • Einstein@Home, for a volunteer distributed computing program one can download in order to help the LIGO/GEO teams analyze their data


  1. ^ a b "GEO600 Specifications". 2007. Retrieved 2007-06-26. 
  2. ^
  3. ^ Gossler, Stefan; et al. (2002). "The modecleaner system and suspension aspects of GEO600". Class. Quantum Grav. 19 (7): 1835.  
  4. ^ Plissi, M.V.; et al. (2000). "GEO600 triple pendulum suspension system: Seismic isolation and control". Rev. Sci. Instrum. 71 (6): 2539.  
  5. ^ Hild, Stefan; et al. (2006). "Measurement of a low-absorption sample of OH-reduced fused silica". Applied Optics 45 (28): 7269.  
  6. ^ Lueck, H; et al. (2004). "Thermal correction of the radii of curvature of mirrors for GEO600". Class. Quantum Grav. 21 (5).  
  7. ^ Prijatelj, Miro; et al. (2012). "The output mode cleaner of GEO600". Class. Quantum Grav. 29 (5).  
  8. ^ Hild, Stefan; et al. (2009). "DC-readout of a signal-recycled gravitational wave detector". Class. Quantum Grav. 26 (5).  
  9. ^ The LIGO scientific collaboration (2011). "A gravitational wave observatory operating beyond the quantum shot-noise limit". Nature Physics 7 (12).  
  10. ^ "GEO600 Sensitivity". Retrieved 2013-05-17. 
  11. ^ "GWIC roadmap p.65" (PDF). Retrieved 2013-05-17. 
  12. ^ a b New Scientist - Our world may be a giant hologram
  13. ^ Hogan, Craig J.; Mark G. Jackson (June 2009). "Holographic geometry and noise in matrix theory". Phys. Rev. D 79 (12): 124009.  
  14. ^ Hogan, Craig J. (2008). "Measurement of quantum fluctuations in geometry". Phys. Rev. D 77 (10): 104031.  
  15. ^ Talk by K. Strain "The Status of GEO600"
  16. ^ GEO600 paper mentioning unexplained noise in 2007
  17. ^ Smolyaninov, Igor I. (Apr 2009). "Level of holographic noise in interferometry". Phys. Rev. D 78 (8): 087503.  

External links

  • GEO600 home page, the official website of the GEO600 project.
  • Cardiff Gravity Group, a page describing research at Cardiff University in Wales, including collaboration in the GEO 600 project, includes an excellent list of tutorials on gravitational wave radiation.
  • Amos, Jonathan. Science to ride gravitational waves. November 8, 2005. BBC News.

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.