World Library  
Flag as Inappropriate
Email this Article

Inlays and onlays

Article Id: WHEBN0001944455
Reproduction Date:

Title: Inlays and onlays  
Author: World Heritage Encyclopedia
Language: English
Subject: Bridge (dentistry), Fixed prosthodontics, Restorative dentistry, Vertical dimension of occlusion, Veneer (dentistry)
Publisher: World Heritage Encyclopedia

Inlays and onlays

Inlays and onlays
ICD-9-CM 23.3

In dentistry, an inlay is usually an indirect restoration (filling) consisting of a solid substance (as gold, porcelain or less often a cured composite resin) fitted to a cavity in a tooth and cemented into place.[1] This technique involves fabricating the restoration outside of the mouth using the dental impressions of the prepared tooth, rather than placing a soft filling into the prepared tooth before the material sets hard.

An onlay is the same as an inlay, except that it incorporates a replacement for a tooth cusp by covering the area where the missing cusp would be. Crowns are onlays which completely cover all surfaces of a tooth.


  • Inlays 1
    • Comparison of Inlays and direct fillings 1.1
  • Onlays 2
  • See also 3
  • References 4


An impression of preparation for restoration with a DO gold inlay on tooth #5. The "DO" designation indicates that the gold serves as a restoration for the distal and occlusal surfaces of the tooth. This tooth was prepared and the inlay will be fabricated according to the R.V. Tucker method of gold inlay preparation. Notice how the line angles of the impression for the inlay are very sharp and precise; this is achieved using carbon-tipped stainless steel instruments. The salmon-colored polyvinylsiloxane impression material is less viscous than the blue and is able to capture better detail for the tooth being restored.

Sometimes, a tooth is planned to be restored with an intracoronal restoration, but the decay or fracture is so extensive that a direct restoration, such as amalgam or composite, would compromise the structural integrity of the restored tooth or provide substandard opposition to occlusal (i.e., biting) forces. In such situations, an indirect gold or porcelain inlay restoration may be indicated.

Comparison of Inlays and direct fillings

When an inlay is used, the tooth-to-restoration margin may be finished and polished to a very fine line of contact to minimize recurrent decay. Opposed to this, direct composite filling pastes shrink a few percent in volume during hardening. This can lead to shrinkage stress and rarely to marginal gaps and failure. Although improvements of the composite resins could be achieved in the last years, solid inlays do exclude this problem.[2] Another advantage of inlays over direct fillings is that there is almost no limitations in the choice of material. While inlays might be ten times the price of direct restorations, it is often expected that inlays are superior in terms of resistance to occlusal forces, protection against recurrent decay, precision of fabrication, marginal integrity, proper contouring for gingival (tissue) health, and ease of cleansing offers. However, this might be only the case for gold. While short term studies come to inconsistent conclusions, a respectable number of long-term studies detect no significantly lower failure rates of ceramic [3] or composite [4] inlays compared to composite direct fillings. Another study detected an increased survival time of composite resin inlays but it was rated to not necessarily justify their bigger effort and price. [5]

An MO gold inlay on tooth #3, the "MO" designation indicating that the gold serves as a restoration for the mesial and occlusal surfaces of the tooth. This tooth was also restored according to the R.V. Tucker method. Notice how the gold appears to flow into the tooth structure, almost perfectly mimicking the natural contours and even allowing the specular reflection to continue over the margin from tooth to gold.


When decay or fracture incorporate areas of a tooth that make amalgam or composite restorations inadequate, such as cuspal fracture or remaining tooth structure that undermines perimeter walls of a tooth, an onlay might be indicated. Similar to an inlay, an onlay is an indirect restoration which incorporates a cusp or cusps by covering or onlaying the missing cusps. All of the benefits of an inlay are present in the onlay restoration. The onlay allows for conservation of tooth structure when the only alternative is to totally eliminate cusps and perimeter walls for restoration with a crown. Just as inlays, onlays are fabricated outside of the mouth and are typically made out of gold or porcelain. Gold restorations have been around for many years and have an excellent track record. In recent years, newer types of porcelains have been developed that seem to rival the longevity of gold. If the onlay or inlay is made in a dental laboratory, a temporary is fabricated while the restoration is custom-made for the patient. A return visit is then required to fit the final prosthesis. Inlays and onlays may also be fabricated out of porcelain and delivered the same day utilizing techniques and technologies relating to CAD/CAM dentistry.[6][7]

See also


  1. ^ NW Medical Guide
  2. ^ Schneider et al.: Shrinkage Stresses Generated during Resin-Composite Applications: A Review; (2010); J Dent Biomech; vol. 1 no. 1 131630 doi:10.4061/2010/131630
  3. ^ Clinical evaluation of ceramic inlays compared to composite restorations.; (2009); RT Lange, P Pfeiffer; Oper Dent. May-Jun;34(3):263-72. doi:10.2341/08-95
  4. ^ Pallesen, U; Qvist, V. "Composite resin fillings and inlays. An 11-year evaluation. (2003)". Clin Oral Invest 7: 71–79.  
  5. ^ Dijken, JWV Van (2000). "Direct resin composite inlays/onlays: an 11 year follow-up.". J Dent 28 (5): 299–306.  
  6. ^ Masek R, Tsotsos S (October 2002). "Ultimate accuracy with correlation". Int J Comput Dent 5 (4): 295–303.  
  7. ^ Masek R (January 2003). "Designing in 3D—a more visual approach to Cerec correlation". Int J Comput Dent 6 (1): 75–82.  
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.