World Library  
Flag as Inappropriate
Email this Article

Junkers T 19

Article Id: WHEBN0027791872
Reproduction Date:

Title: Junkers T 19  
Author: World Heritage Encyclopedia
Language: English
Subject: Junkers
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Junkers T 19

T 19
Role Training and touring
National origin Germany
Manufacturer Junkers Flugzeug Werke AG
First flight 14 july 1922
Number built 3?

The Junkers T 19, originally known as the J 19, was a single-engined parasol winged all-metal 2/3-seat aircraft built in Germany in the early 1920s for training and touring. Its construction was too expensive for commercial success and only three were built, one later finding use as an engine test-bed.

Design and development

The Junkers T 19 was the first of three Junkers aircraft aimed at the private market; because of the high construction costs of all-metal light planes compared to their canvas covered contemporaries, none was successful. It was built mostly from duralumin with a tubular-membered frame covered by corrugated sheet.[1]

The wing was a cantilever structure, without the lift struts to mid wing seen on most parasol winged aircraft. It had a constant chord centre section with outboard taper on both leading and trailing edges. The ailerons were short and wide chord, with curved trailing edges that projected beyond that of the wing.[2] Four sets of V and inverted-V struts attached the wing to the upper fuselage longerons.[1]

The tapered fuselage was flat sided, with a long open cockpit reaching from leading to trailing edge. The pilot sat at the front immediately behind the engine. Seats for one or two passengers could be fitted in the rear with access via a triangular shaped starboard side door. The tailplane was mounted on top of the fuselage and carried horn balanced elevators. The combination of a triangular fin and straight edged rudder, which extended down to the bottom of the fuselage in a cut out between the elevators, gave the vertical surface a rather pointed look. The main undercarriage legs, with prominent shock absorbers, were mounted on the upper fuselage longerons. Two bracing struts reached forward to the lower fuselage below the engine and the wheels were linked by a hinged axle centrally mounted to the lower fuselage with further struts.[1][2]

Operational history

The T 19 first flew on 14 July 1922,[1] powered by a 55 hp (41 kW) Siemens-Halske Sh 4 5-cylinder radial engine.[3] Two more T 19s were flown, one with a 77 hp (57 kW) 7-cylinder Sh 5 engine and the other with a 110 hp (82 kW) 9-cylinder Sh 12.[1][3] The second T 19 was used as an engine test bed and was the first aircraft to fly with Junkers' first flight petrol engine, the aircooled 75 hp (56 kW) 6-cylinder inline L1 of 1921.[1][4] It also flew[2] with a 1926 Armstrong Siddeley Genet.[5] The third T 19 was sold to India.[1]


Specifications (Genet engine)

Data from Turner & Nowarra 1971 p.24

General characteristics
  • Crew: 1
  • Capacity: 1/2 passengers[1]
  • Length: 6.12 m (20 ft 1 in)
  • Wingspan: 11.25 m (36 ft 11 in)
  • Height: 2.77 m (9 ft 1 in)
  • Wing area: 19.0 m2 (205 sq ft) [1]
  • Empty weight: 525 kg (1,158 lb)
  • Gross weight: 761 kg (1,677 lb)
  • Powerplant: 1 × Armstrong Siddeley Genet 5 cylinder radial, 60 kW (80 hp)

Performance

  • Maximum speed: 134 km/h; 72 kn (83 mph)
  • Cruise speed: 109 km/h; 59 kn (68 mph)
  • Service ceiling: 3,962 m (13,000 ft)

References

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.