World Library  
Flag as Inappropriate
Email this Article


Article Id: WHEBN0000230159
Reproduction Date:

Title: Landing  
Author: World Heritage Encyclopedia
Language: English
Subject: CTOL, Takeoff and landing, Takeoff, Autoland, Splashdown
Collection: Articles Containing Video Clips, Flight Phases, Types of Landing, Types of Take-Off and Landing
Publisher: World Heritage Encyclopedia


A Bombardier CRJ700 about to land
Piper Cherokee landing sequence from approach to flare
A landing Delta Air Lines Boeing 767-400ER. The smoke emanating from the left main undercarriage wheels shows that it touched down on that main landing gear first, which is normal procedure in a left cross wind.
A mute swan alighting. Note the ruffled feathers on top of the wings indicate that the swan is flying at the stalling speed. The extended and splayed feathers act as lift augmenters in the same way as an aircraft's slats and flaps.
An unusual landing; a Piper J3C-65 Cub lands on a trailer as part of an airshow.
F-18 landing on an aircraft carrier
Soyuz space capsule retro-rockets cushion the landing impact

Landing is the last part of a flight, where a flying animal, aircraft, or spacecraft returns to the ground. When the flying object returns to water, the process is called alighting, although it is commonly called "landing," "touchdown" or "splashdown" as well. A normal aircraft flight would include several parts of flight including taxi, takeoff, climb, cruise, descent and landing.


  • Aircraft 1
    • Light aircraft 1.1
    • Large aircraft 1.2
    • Environmental factors 1.3
  • Parachutes 2
  • Spacecraft 3
  • See also 4
  • References 5


Aircraft usually land at an airport on a firm runway or helicopter landing pad, generally constructed of asphalt concrete, concrete, gravel or grass. Aircraft equipped with pontoons (floatplane) or with a boat hull-shaped fuselage (a flying boat) are able to land on water. Aircraft also sometimes use skis to land on snow or ice.

To land, the airspeed and the rate of descent are reduced such that the object descends at a low enough rate to allow for a gentle touch down. Landing is accomplished by slowing down and descending to the runway. This speed reduction is accomplished by reducing thrust and/or inducing a greater amount of drag using flaps, landing gear or speed brakes. When a fixed-wing aircraft approaches the ground, the pilot will move the control column back to execute a flare or round-out. This increases the angle of attack. Progressive movement of the control column back will allow the aircraft to settle onto the runway at minimum speed, landing on its main wheels first in the case of a tricycle gear aircraft or on all three wheels simultaneously in the case of a conventional landing gear-equipped aircraft, commonly referred to as a "taildragger". This is known as flaring.[1][2][3][4]

Light aircraft

In a light aircraft, with little crosswind, the ideal landing is when contact with the ground occurs as the forward speed is reduced to the point where there is no longer sufficient airspeed to remain aloft. The stall warning is often heard just before landing, indicating that this speed and altitude have been reached. The result is very light touch down.[4]

Light aircraft landing situations, and the pilot skills required, can be divided into four types:

  • Normal landings[4]
  • Crosswind landings - where a significant wind not aligned with the landing area is a factor[4]
  • Short field landings - where the length of the landing area is a limiting factor[4]
  • Soft and unprepared field landings - where the landing area is wet, soft or has ground obstacles such as furrows or ruts to contend with[4]

Large aircraft

In large transport category (airliner) aircraft, pilots land the aircraft by "flying the airplane on to the runway." The airspeed and attitude of the plane are adjusted for landing. The airspeed is kept well above stall speed and at a constant rate of descent. A flare is performed just before landing, and the descent rate is significantly reduced, causing a light touch down. Upon touchdown, spoilers (sometimes called "lift dumpers") are deployed to dramatically reduce the lift and transfer the aircraft's weight to its wheels, where mechanical braking, such as an autobrake system, can take effect. Reverse thrust is used by many jet aircraft to help slow down just after touch-down, redirecting engine exhaust forward instead of back. Some propeller-driven airplanes also have this feature, where the blades of the propeller are re-angled to push air forward instead of back using the 'beta range'.

Environmental factors

Factors such as crosswind where the pilot will use a crab landing or a slip landing will cause pilots to land slightly faster and sometimes with different aircraft attitude to ensure a safe landing.

Other factors affecting a particular landing might include: the plane size, wind, weight, runway length, obstacles, ground effects, weather, runway altitude, air temperature, air pressure, air traffic control, visibility, avionics and the overall situation.

For example, landing a multi-engine turboprop military such as a C-130 Hercules, under fire in a grass field in a war zone, requires different skills and precautions than landing a single engine plane such as a Cessna 150 on a paved runway in uncontrolled airspace, which is different from landing an airliner such as an Airbus A380 at a major airport with air traffic control.

Required Navigation Performance (RNP) is being used more and more. Rather than using radio beacons, the airplane uses GPS-navigation for landing using this technique. This translates into a much more fluid ascend, which results in decreased noise, and decreased fuel consumption.[5]


The term "landing" is also applied to people or objects descending to the ground using a parachute. Some consider these objects to be in a controlled descent instead of actually flying. Most parachutes work by capturing air, inducing enough drag that the falling object hits the ground at a relatively slow speed. There are many examples of parachutes in nature, including the seeds of a dandelion.

On the other hand, modern ram-air parachutes are essentially inflatable wings that operate in a gliding flight mode. Parachutists execute a flare at landing, reducing or eliminating both downward and forward speed at touchdown, in order to avoid injury.[6]


Sometimes, a safe landing is accomplished by using multiple forms of lift, thrust (propulsive landing[7]) and dampening systems. The Apollo Lunar Module used a rocket and landing gear to land on the moon. Several Soviet rockets including the Soyuz spacecraft have used parachutes and airbag landing systems to dampen the landing on earth.

See also


  1. ^ Aviation Glossary (2011). "Flare (ICAO Definition)". Retrieved 26 January 2011. 
  2. ^  
  3. ^ Crane, Dale: Dictionary of Aeronautical Terms, third edition, page 217. Aviation Supplies & Academics, 1997. ISBN 1-56027-287-2
  4. ^ a b c d e f Transport Canada: Aeroplane Flight Training Manual, 4th Edition, pages 104-115. Gage Educational Publishing Company, 1994. ISBN 0-7715-5115-0
  5. ^ "Required Navigation Performance | GE Aviation Systems". GE Aviation. Retrieved 2012-07-16. 
  6. ^  
  7. ^ Samad Hayati, et al, Strategic Technology Development for Future Mars Missions (2013-2022), NASA, September 15, 2009
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.