World Library  
My Account |  Register |  Help  
  
Flag as Inappropriate
Email this Article

List of ISO standards

Article Id: WHEBN0026305121
Reproduction Date:

Title: List of ISO standards  
Author: World Heritage Encyclopedia
Language: English
Subject: Bicycle, Portable Document Format, Portable Network Graphics, ISO/IEC 7816, ISO 9000, Card standards, ISO/IEC 14443, Geography Markup Language, ISO 10006, Index of standards articles
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

List of ISO standards

This is a list of current, published[Note 1] International Organization for Standardization (ISO) standards and other deliverables.[Note 2] For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.[1]

The standards are protected by copyright and most of them must be purchased. However about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC1) have been made freely and publicly available.[2]

This is an incomplete list, which may never be able to satisfy particular standards for completeness. You can help by expanding it with reliably sourced entries.

ISO 1 – ISO 999

  • ISO 1:2002 Geometrical Product Specifications (GPS) – Standard reference temperature for geometrical product specification and verification
  • ISO 2:1973 Textiles – Designation of the direction of twist in yarns and related products
  • ISO 3:1973 Preferred numbers – Series of preferred numbers
  • ISO 4:1997 Information and documentation – Rules for the abbreviation of title words and titles of publications
  • ISO 5 Photography and graphic technology – Density measurements
    • ISO 5-1:2009 Geometry and functional notation
    • ISO 5-2:2009 Geometric conditions for transmittance density
    • ISO 5-3:2009 Spectral conditions
    • ISO 5-4:2009 Geometric conditions for reflection density
  • ISO 6:1993 Photography – Black-and-white pictorial still camera negative film/process systems – Determination of ISO speed
  • ISO 7 Pipe threads where pressure-tight joints are made on the threads
    • ISO 7-1:1994 Dimensions, tolerances and designation
    • ISO 7-2:2000 Verification by means of limit gauges
  • ISO 8:1977 Documentation – Presentation of periodicals
  • ISO 9:1995 Information and documentation – Transliteration of Cyrillic characters into Latin characters – Slavic and non-Slavic languages
  • ISO 11:1987 Aircraft – Ground pressure testing connections for pressure cabins
  • ISO 12:1987 Aerospace – Pipelines – Identification
  • ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering – Dimensions, tolerances and verification
  • ISO 16:1975 Acoustics – Standard tuning frequency (Standard musical pitch)
  • ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers
  • ISO 18 Documentation – Contents list of periodicals
  • ISO 21:1985 Shipbuilding – Inland navigation – Cable-lifters for stud-link anchor chains
  • ISO 22:1991 Belt drives – Flat transmission belts and corresponding pulleys – Dimensions and tolerances
  • ISO 31 Quantities and units [withdrawn]
  • ISO 32:1977 Gas cylinders for medical use -- Marking for identification of content
  • ISO 37:2011 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
  • ISO 44:1975 Aerospace -- Lever-operated, two-position, ON/OFF switches -- Directions of operation
  • ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1
  • ISO 68 ISO general-purpose screw threads – Basic profile
    • ISO 68-1:1998 Metric screw threads
    • ISO 68-2:1998 Inch screw threads
  • ISO Guide 73:2009 Risk management - Vocabulary
  • ISO 78 Chemistry — Layouts for standards
    • ISO 78-2:1999 Methods of chemical analysis
  • ISO 105 Textiles — Test for colour fastness
  • ISO 128:1982 Technical drawings – General principles of presentation (withdrawn 2001-04-17)
  • ISO 216:2007 Writing paper and certain classes of printed matter – Trimmed sizes – A and B series, and indication of machine direction
  • ISO 226:2003 Acoustics – Normal equal-loudness-level contours
  • ISO 228 Pipe threads where pressure-tight joints are not made on the threads
    • ISO 228-1:2000 Dimensions, tolerances and designation
    • ISO 228-2:1987 Verification by means of limit gauges
  • ISO 233 Information and documentation – Transliteration of Arabic characters into Latin characters[Note 3]
    • ISO 233-2:1993 Arabic language – Simplified transliteration
    • ISO 233-3:1999 Persian language – Simplified transliteration
  • ISO 259 Information and documentation – Transliteration of Hebrew characters into Latin characters[Note 3]
    • ISO 259-2:1994 Simplified transliteration
  • ISO 261 ISO general purpose metric screw threads – General plan
  • ISO 262 ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts
  • ISO 361 Basic ionizing radiation symbol
  • ISO 500 Agricultural tractors – Rear-mounted power take-off types 1, 2 and 3
  • ISO 518:2006 Photography – Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units – Specification
  • ISO 519:1992 Photography – Hand-held cameras – Flash-connector dimensions
  • ISO 639 Codes for the representation of names of languages
    • ISO 639-1 Alpha-2 code
    • ISO 639-2 Alpha-3 code
    • ISO 639-3 Alpha-3 code for comprehensive coverage of languages
    • ISO 639-4 General principles of coding of the representation of names of languages and related entities, and application guidelines
    • ISO 639-5 Alpha-3 code for language families and groups
    • ISO 639-6 Alpha-4 code for comprehensive coverage of language variants
  • ISO/IEC 646 Information technology – ISO 7-bit coded character set for information interchange
  • ISO 657 Hot-rolled steel sections
  • ISO 668 Series 1 freight containers – Classification, dimensions and ratings
  • ISO 690 Information and documentation – Guidelines for bibliographic references and citations to information resources
  • ISO 704 Terminology work – Principles and methods
  • ISO 732 Photography – 120-size and 220-size films – Dimensions
  • ISO 764 Horology – Magnetic resistant watches
  • ISO 760:1978 Determination of water - Karl Fischer method (General method)
  • ISO 787 General methods of test for pigments and extenders
    • ISO 787-9:1981 Determination of pH value of an aqueous suspension
  • ISO 838 Paper – Holes for general filing purposes – Specifications
  • ISO 843:1997 Information and documentation – Conversion of Greek characters into Latin characters
  • ISO 860 Terminology work – Harmonization of concepts and terms
  • ISO 898 Mechanical properties of fasteners made of carbon steel and alloy steel[Note 3]
    • ISO 898-1 Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread
    • ISO 898-2 Nuts with specified proof load values – Coarse thread
    • ISO 898-5 Set screws and similar threaded fasteners not under tensile stresses
    • ISO 898-6 Nuts with specified proof load values – Fine pitch thread
    • ISO 898-7 Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
  • ISO 965 ISO general purpose metric screw threads – Tolerances
    • ISO 965-1 Principles and basic data
    • ISO 965-2 Limits of sizes for general purpose external and internal screw threads – Medium quality
    • ISO 965-3 Deviations for constructional screw threads
    • ISO 965-4 Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
    • ISO 965-5 Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
  • ISO 999 Information and documentation – Guidelines for the content, organization, and presentation of indexes

ISO 1000 – ISO 4999

  • ISO 1000 SI units and recommendations for the use of their multiples and of certain other units [withdrawn 2009-11-17]
  • ISO 1004 Information processing – Magnetic ink character recognition – Print specifications
  • ISO 1007 Photography – 135-size film and magazine – Specifications
  • ISO 1101 Geometrical Product Specifications (GPS) – Geometrical tolerancing – Tolerances of form, orientation, location and run-out
  • ISO 1222 Photography – Tripod connections
  • ISO 1268 Fibre-reinforced plastics – Methods of producing test plates
  • ISO/IEC 1539 Information technology – Programming languages – Fortran
  • ISO 1629 Rubber and latices – Nomenclature
  • ISO 1663 Rigid cellular plastics – Determination of water vapour transmission properties
  • ISO 1745 Information processing – Basic mode control procedures for data communication systems
  • ISO 1750 Pesticides and other agrochemicals – Common names
  • ISO 1928 Solid mineral fuels – Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
  • ISO/IEC 2022 Information technology – Character code structure and extension techniques
  • ISO 2108 Information and documentation – International standard book number (ISBN)
  • ISO 2145 Documentation – Numbering of divisions and subdivisions in written documents
  • ISO 2162 Technical product documentation – Springs
    • ISO 2162-1 Simplified representation
    • ISO 2162-2 Presentation of data for cylindrical helical compression springs
  • ISO 2171 Cereals, pulses and by-products – Determination of ash yield by incineration
  • ISO 2240:2003 Photography – Colour reversal camera films – Determination of ISO speed
  • ISO 2533 Standard Atmosphere
  • ISO 2709 Information and documentation – Format for information exchange
  • ISO 2768 General tolerances
    • ISO 2768-1 Tolerances for linear and angular dimensions without individual tolerance indications
    • ISO 2768-2 Geometrical tolerances for features without individual tolerance indications
  • ISO 2852 Stainless steel clamp pipe couplings for the food industry
  • ISO 3002 Basic quantities in cutting and grinding
  • ISO 3082 Iron ores – Sampling and sample preparation procedures
  • ISO 3098 Technical product documentation – Lettering
  • ISO 3103 Tea – Preparation of liquor for use in sensory tests
  • ISO 3166 Codes for the representation of names of countries and their subdivisions
  • ISO 3297 Information and documentation – International standard serial number (ISSN)
  • ISO 3394 Dimensions of rigid rectangular packages – Transport packages
  • ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners
  • ISO 3536 Road vehicles – Safety glazing materials – Vocabulary
  • ISO 3537 Road vehicles – Safety glazing materials – Mechanical tests
  • ISO 3538 Road vehicles – Safety glazing materials – Test methods for optical properties
  • ISO 3601 Fluid power systems – O-rings
    • ISO 3601-1 Inside diameters, cross-sections, tolerances and designation codes
    • ISO 3601-2 Housing dimensions for general applications
    • ISO 3601-3 Quality acceptance criteria
    • ISO 3601-4 Anti-extrusion rings (back-up rings)
    • ISO 3601-5 Suitability of elastomeric materials for industrial applications
  • ISO 3602 Documentation – Romanization of Japanese (kana script)
  • ISO 3632 Spices – Saffron (Crocus sativus L.)[Note 3]
  • ISO 3635:1981 Size designation of clothes – Definitions and body measurement procedure
  • ISO 3676 Packaging – Unit load sizes – Dimensions
  • ISO 3864 Graphical symbols – Safety colours and safety signs
  • ISO 3901 Information and documentation – International Standard Recording Code (ISRC)
  • ISO 3977 Gas turbines – Procurement
  • ISO 4074 Natural latex rubber condoms – Requirements and test methods
  • ISO 4157 Construction drawings – Designation systems
    • ISO 4157-1 Buildings and part of buildings
    • ISO 4157-2 Room names and numbers
    • ISO 4157-3 Room identifiers
  • ISO 4165 Road vehicles — Electrical connections — Double-pole connection
  • ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines – Cement mortar lining
  • ISO 4217 Codes for the representation of currencies and funds
  • ISO 4314 Surface active agents — Determination of free alkalinity or free acidity — Titrimetric method
  • ISO 4578 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method
  • ISO 4582 Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
  • ISO 4587 Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
  • ISO 4628 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance
    • ISO 4628-1 General introduction and designation system
    • ISO 4628-2 Assessment of degree of blistering
    • ISO 4628-3 Assessment of degree of rusting
    • ISO 4628-4 Assessment of degree of cracking
    • ISO 4628-5 Assessment of degree of flaking
    • ISO 4628-6 Assessment of degree of chalking by tape method
    • ISO 4628-7 Assessment of degree of chalking by velvet method
    • ISO 4628-8 Assessment of degree of delamination and corrosion around a scribe
    • ISO 4628-10 Assessment of degree of filiform corrosion
  • ISO/IEC 4873:1991 Information technology – ISO 8-bit code for information interchange – Structure and rules for implementation
  • ISO 4892 Plastics – Methods of exposure to laboratory light sources

ISO 5000 – ISO 9999

  • ISO 5127 Information and documentation – Vocabulary
  • ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full
    • ISO 5167-1 General principles and requirements
    • ISO 5167-2 Orifice plates
    • ISO 5167-3 Nozzles and Venturi nozzles
    • ISO 5167-4 Venturi tubes
  • ISO/IEC 5218 Information technology – Codes for the representation of human sexes
  • ISO 5455 Technical drawings – Scales
  • ISO 5457 Technical product documentation – Sizes and layout of drawing sheets
  • ISO 5660 Reaction-to-fire tests – Heat release, smoke production and mass loss rate
    • ISO 5660-1 Heat release rate (cone calorimeter method)
    • ISO 5660-2 Smoke production rate (dynamic measurement)
    • ISO/TS 5660-3 Guidance on measurement
  • ISO 5725 Accuracy (trueness and precision) of measurement methods and results
  • ISO 5775 Bicycle tires and rims
  • ISO 5776 Graphic technology - Symbols for text correction
  • ISO 5800:2001 Photography – Colour negative films for still photography – Determination of ISO speed
  • ISO 5893 Rubber and plastics test equipment – Tensile, flexural and compression types (constant rate of traverse) – Specification
  • ISO 5964 Documentation – Guidelines for the establishment and development of multilingual thesauri
  • ISO 5971:1981 Size designation of clothes – Pantyhose
  • ISO 5993 Sodium hydroxide for industrial use -- Determination of mercury content -- Flameless atomic absorption spectrometric method
  • ISO 6107-4:1993 Water quality -- Vocabulary
  • ISO 6166 Securities and related financial instruments – International securities identification numbering system (ISIN)
  • ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements
    • ISO 6194-5 Identification of visual imperfections
  • ISO 6336 Calculation of load capacity of spur and helical gears
  • ISO 6344 Coated abrasives – Grain size analysis
    • ISO 6344-1 Grain size distribution test
    • ISO 6344-2 Determination of grain size distribution of macrogrits P12 to P220
    • ISO 6344-3 Determination of grain size distribution of microgrits P240 to P2500
  • ISO/IEC 6429 Information technology – Control functions for coded character sets
  • ISO 6438 Documentation – African coded character set for bibliographic information interchange
  • ISO/IEC 6523 Information technology – Structure for the identification of organizations and organization parts
  • ISO 6579 Microbiology of food and animal feeding stuffs – Horizontal method for the detection of Salmonella spp.
  • ISO 6594 Cast iron drainage pipes and fittings – Spigot series
  • ISO 6709 Standard representation of geographic point location by coordinates
  • ISO 6946 Building components and building elements – Thermal resistance and thermal transmittance – Calculation method
  • ISO 7001 Graphical symbols – Public information symbols
  • ISO 7002 Agricultural food products – Layout for a standard method of sampling from a lot
  • ISO 7098 Information and documentation – Romanization of Chinese
  • ISO 7200 Technical product documentation – Data fields in title blocks and document headers
  • ISO 7240 Fire detection and alarm systems
  • ISO 7372 Trade data interchange
  • ISO/IEC 7498 Information technology -- Open Systems Interconnection -- Basic Reference Model[Note 3]
    • ISO/IEC 7498-1 The Basic Model
    • ISO 7498-2 Security Architecture
    • ISO/IEC 7498-3 Naming and addressing
    • ISO/IEC 7498-4 Management framework
  • ISO/IEC 7501 Identification cards – Machine readable travel documents
    • ISO/IEC 7501-1:2008 Machine readable passport
    • ISO/IEC 7501-2:1997 Machine readable visa
    • ISO/IEC 7501-3:2005 Machine readable official travel documents
  • ISO 7736 Road vehicles – Car radio for front installation – Installation space including connections
  • ISO/IEC 7810 Identification cards – Physical characteristics
  • ISO/IEC 7811 Identification cards – Recording technique
  • ISO/IEC 7812 Identification cards – Identification of issuers
  • ISO/IEC 7813 Information technology – Identification cards – Financial transaction cards
  • ISO/IEC 7816 Identification cards – Integrated circuit cards[Note 3]
  • ISO/IEC 7942 Information technology – Computer graphics and image processing – Graphical Kernel System (GKS)
  • ISO 8000 Data quality
  • ISO 8015:2011 Geometrical product specifications (GPS) – Fundamentals – Concepts, principles and rules
  • ISO 8090 Cycles – Terminology
  • ISO 8180 Ductile iron pipelines – Polyethylene sleeving for site application
  • ISO 8373 Manipulating industrial robots – Vocabulary
  • ISO 8501 Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness
  • ISO 8559:1989 Garment construction and anthropometric surveys – Body dimensions
  • ISO 8573 Compressed air
    • ISO 8573-1 Contaminants and purity classes
    • ISO 8573-2 Test methods for oil aerosol content
    • ISO 8573-3 Test methods for measurement of humidity
    • ISO 8573-4 Test methods for solid particle content
    • ISO 8573-5 Test methods for oil vapour and organic solvent content
    • ISO 8573-6 Test methods for gaseous contaminant content
    • ISO 8573-7 Test method for viable microbiological contaminant content
    • ISO 8573-8 Test methods for solid particle content by mass concentration
    • ISO 8573-9 Test methods for liquid water content
  • ISO 8583 Financial transaction card originated messages – Interchange message specifications
    • ISO 8583-1 Messages, data elements and code values
    • ISO 8583-2 Application and registration procedures for Institution Identification Codes (IIC)
    • ISO 8583-3 Maintenance procedures for messages, data elements and code values
  • ISO 8601 Data elements and interchange formats – Information interchange – Representation of dates and times
  • ISO/IEC 8613 Information technology – Open Document Architecture (ODA) and interchange format
  • ISO/IEC 8632 Information technology – Computer graphics – Metafile for the storage and transfer of picture description information
    • ISO/IEC 8632-1 Functional specification
    • ISO/IEC 8632-2 Character encoding
    • ISO/IEC 8632-3 Binary encoding [withdrawn 2001-06-21]
    • ISO/IEC 8632-4 Clear text encoding
  • ISO 8651 Information technology – Computer graphics – Graphical Kernel System (GKS) language bindings[Note 3]
  • ISO/IEC 8652 Information technology – Programming languages – Ada
  • ISO 8653:1986 Jewellery – Ring-sizes – Definition, measurement and designation
  • ISO 8691 Petroleum products – Low levels of vanadium in liquid fuels – Determination by flameless atomic absorption spectrometry after ashing
  • ISO 8805 Information processing systems – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) functional description
  • ISO/IEEC 8806 Information technology – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) language bindings
    • ISO/IEEC 8806-4 C
  • ISO 8807 Information processing systems – Open Systems Interconnection – LOTOS – A formal description technique based on the temporal ordering of observational behaviour
  • ISO/IEC 8824 Information technology – Abstract Syntax Notation One (ASN.1)
  • ISO/IEC 8825 Information technology – ASN.1 encoding rules
  • ISO/IEC 8859 Information technology – 8-bit single-byte coded graphic character sets
  • ISO 8879 Information processing – Text and office systems – Standard Generalized Markup Language (SGML)
  • ISO 9000 Quality management systems – Fundamentals and vocabulary
  • ISO 9001 Quality management systems – Requirements
  • ISO 9004 Managing for the sustained success of an organization – A quality management approach
  • ISO 9050 Glass in building – Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
  • ISO 9069 Information processing – SGML support facilities – SGML Document Interchange Format (SDIF)
  • ISO/IEC 9075 Information technology – Database languages – SQL
  • ISO/IEC 9126 Software engineering – Product quality
  • ISO 9141 Road vehicles – Diagnostic systems[Note 3]
    • ISO 9141-2 CARB requirements for interchange of digital information
    • ISO 9141-3 Verification of the communication between vehicle and OBD II scan tool
  • ISO 9241 Ergonomics of human-system interaction
  • ISO/IEC 9293 Information technology – Volume and file structure of disk cartridges for information interchange
  • ISO 9362 Banking – Banking telecommunication messages – Business identifier code (BIC)
  • ISO 9407 Shoe sizes – Mondopoint system of sizing and marking
  • ISO/IEC 9541 Information technology – Font information interchange
    • ISO/IEC 9541-1:1991 Architecture
    • ISO/IEC 9541-2:1991 Interchange Format
    • ISO/IEC 9541-3:1994 Glyph shape representation
    • ISO/IEC 9541-4:2009 Harmonization to Open Font Format
  • ISO 9564 Financial services – Personal Identification Number (PIN) management and security[Note 3]
  • ISO/IEC 9579 Information technology – Remote database access for SQL with security enhancement
  • ISO/IEC 9592 Information technology – Computer graphics and image processing – Programmer's Hierarchical Interactive Graphics System (PHIGS)
  • ISO/IEC 9593 Information technology – Computer graphics – Programmer's Hierarchical Interactive Graphics System (PHIGS) language bindings[Note 3]
  • ISO/IEC 9594 Information technology – Open Systems Interconnection – The Directory
  • ISO/IEC 9636 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Functional specification
    • ISO/IEC 9636-1 Overview, profiles, and conformance
    • ISO/IEC 9636-2 Control
    • ISO/IEC 9636-3 Output
    • ISO/IEC 9636-4 Segments
    • ISO/IEC 9636-5 Input and echoing
    • ISO/IEC 9636-6 Raster
  • ISO 9660 Information processing – Volume and file structure of CD-ROM for information interchange
  • ISO/IEC 9796 Information technology – Security techniques – Digital signature schemes giving message recovery
  • ISO/IEC 9797 Information technology – Security techniques – Message Authentication Codes (MACs)
    • ISO/IEC 9797-1 Mechanisms using a block cipher
    • ISO/IEC 9797-2 Mechanisms using a dedicated hash-function
  • ISO/IEC 9798 Information technology – Security techniques – Entity authentication
  • ISO/IEC 9834 Information technology – Open Systems Interconnection – Procedures for the operation of OSI Registration Authorities
  • ISO 9869 Thermal insulation – Building elements – In-situ measurements of thermal resistance and thermal transmittance
  • ISO/IEC 9899 Programming languages – C
  • ISO/IEC/IEEE 9945 Information technology – Portable Operating System Interface (POSIX®) Base Specifications, Issue 7
  • ISO 9984 Information and documentation – Transliteration of Georgian characters into Latin characters
  • ISO 9985 Information and documentation – Transliteration of Armenian characters into Latin characters
  • ISO 9992 Financial transaction cards – Messages between the integrated circuit card and the card accepting device
  • ISO/IEC 9995 Information technology – Keyboard layouts for text and office systems
  • ISO 9999 Assistive products for persons with disability – Classification and terminology

ISO 10000 – ISO 14999

  • ISO 10005:2005 Quality management systems – Guidelines for quality plans
  • ISO 10006 Quality management systems – Guidelines for quality management in projects
  • ISO 10007 Quality management systems – Guidelines for configuration management
  • ISO 10012 Measurement management systems – Requirements for measurement processes and measuring equipment
  • ISO/IEC 10021 Information technology – Message Handling Systems (MHS)
  • ISO/IEC 10026 Information technology – Open Systems Interconnection
  • ISO 10077 Thermal performance of windows, doors and shutters – Calculation of thermal transmittance
  • ISO/IEC 10089 Information technology – 130 mm rewritable optical disk cartridge for information interchange
  • ISO/IEC 10116 Information technology – Security techniques – Modes of operation for an n-bit block cipher
  • ISO/IEC 10118 Information technology – Security techniques – Hash-functions
  • ISO 10160 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Service Definition
  • ISO 10161 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Protocol Specification
  • ISO/IEC 10164 Information technology – Open Systems Interconnection – Systems Management
  • ISO/IEC 10179:1996 Information technology – Processing languages – Document Style Semantics and Specification Language (DSSSL)
  • ISO/IEC 10206 Information technology – Progamming languages – Extended Pascal
  • ISO 10211 Thermal bridges in building construction – Heat flows and surface temperatures – Detailed calculations
  • ISO 10218 Robots and robotic devices – Safety requirements for industrial robots
  • ISO/IEC 10279 Information technology – Programming languages – Full BASIC
  • ISO 10303 Industrial automation systems and integration – Product data representation and exchange
  • ISO 10380 Pipework — Corrugated metal hoses and hose assemblies
  • ISO 10383 Securities and related financial instruments – Codes for exchanges and market identification (MIC)
  • ISO 10487 Passenger cars – Connections for car radios[Note 3]
  • ISO 10555 Sterile, single-use intravascular catheters
  • ISO 10628 Flow diagrams for process plants
  • ISO/IEC 10646 Information technology – Universal Coded Character Set (UCS)
  • ISO 10664 Hexalobular internal driving feature for bolts and screws – Torx screw head
  • ISO/IEC 10746-1 Information technology - Open Distributed Processing - Reference model: Overview
  • ISO/IEC 10746-2 Information technology - Open distributed processing - Reference model: Foundations
  • ISO/IEC 10746-3 Information technology - Open distributed processing - Reference model: Architecture
  • ISO/IEC 10746-4 Information technology - Open Distributed Processing - Reference Model: Architectural semantics
  • ISO 10957 Information and documentation – International standard music number (ISMN)
  • ISO 10962 Securities and related financial instruments – Classification of Financial Instruments (CFI code)
  • ISO 10993 Biological evaluation of medical devices
    • ISO 10993-1 Evaluation and testing within a risk management process
    • ISO 10993-2 Animal welfare requirements
    • ISO 10993-3 Tests for genotoxicity, carcinogenicity and reproductive toxicity
    • ISO 10993-4 Selection of tests for interactions with blood
    • ISO 10993-5 Tests for in vitro cytotoxicity
    • ISO 10993-6 Tests for local effects after implantation
    • ISO 10993-7 Ethylene oxide sterilization residuals
    • ISO 10993-9 Framework for identification and quantification of potential degradation products
    • ISO 10993-10 Tests for irritation and skin sensitization
    • ISO 10993-11 Tests for systemic toxicity
    • ISO 10993-12 Sample preparation and reference materials
    • ISO 10993-13 Identification and quantification of degradation products from polymeric medical devices
    • ISO 10993-14 Identification and quantification of degradation products from ceramics
    • ISO 10993-15 Identification and quantification of degradation products from metals and alloys
    • ISO 10993-16 Toxicokinetic study design for degradation products and leachables
    • ISO 10993-17 Establishment of allowable limits for leachable substances
    • ISO 10993-18 Chemical characterization of materials
    • ISO 10993-19 Physico-chemical, morphological and topographical characterization of materials
    • ISO 10993-20 Principles and methods for immunotoxicology testing of medical devices
  • ISO 11064 Ergonomic design of control centres
    • ISO 11064-1:2000 Principles for the design of control centres
    • ISO 11064-2:2000 Principles for the arrangement of control suites
    • ISO 11064-3:1999 Control room layout ISO 11064-3:1999/Cor 1:2002
    • ISO 11064-4:2004 Layout and dimensions of workstations
    • ISO 11064-5:2008 Displays and controls
    • ISO 11064-6:2005 Environmental requirements for control centres
    • ISO 11064-7:2006 Principles for the evaluation of control centres
  • ISO 11137 Sterilization of health care products – Radiation
  • ISO 11170:2003 Hydraulic fluid power – Filter elements – Sequence of tests for verifying performance characteristics
  • ISO 11171:2010 Hydraulic fluid power – Calibration of automatic particle counters for liquids
  • ISO/IEC 11172 Information technology – Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s
  • ISO/IEC 11179 Information technology – Metadata registries (MDR)
    • ISO/IEC 11179-1:2004 Framework
    • ISO/IEC 11179-2:2005 Classification
    • ISO/IEC 11179-3:2003 Registry metamodel and basic attributes
    • ISO/IEC 11179-4:2004 Formulation of data definitions
    • ISO/IEC 11179-5:2005 Naming and identification principles
    • ISO/IEC 11179-6:2005 Registration
  • ISO 11357 Plastics – Differential scanning calorimetry (DSC)
    • ISO 11357-1:2009 General principles
    • ISO 11357-2:2013 Determination of glass transition temperature and glass transition step height
    • ISO 11357-3:2011 Determination of temperature and enthalpy of melting and crystallization
    • ISO 11357-4:2005 Determination of specific heat capacity
    • ISO 11357-5:2013 Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
    • ISO 11357-6:2008 Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
    • ISO 11357-7:2002 Determination of crystallization kinetics
  • ISO/IEC 11404 Information technology – General-Purpose Datatypes (GPD)
  • ISO 11446:2004 Road vehicles – Connectors for the electrical connection of towing and towed vehicles – 13-pole connectors for vehicles with 12 V nominal supply voltage
  • ISO 11469:2000 Plastics – Generic identification and marking of plastics products
  • ISO/IEC 11578:1996 Information technology – Open Systems Interconnection – Remote procedure call (RPC)
  • ISO 11783 Tractors and machinery for agriculture and forestry – Serial control and communications data network
  • ISO/IEC 11801 Information technology – Generic cabling for customer premises
  • ISO 11898 Road vehicles – Controller area network (CAN)
  • ISO 12006 Building construction – Organization of information about construction works
  • ISO/IEC 12207 Systems and software engineering – Software life cycle processes
  • ISO 12100 Safety of machinery – General principles for design – Risk assessment and risk reduction
  • ISO 12639 Graphic technology – Prepress digital data exchange – Tag image file format for image technology (TIFF/IT)
  • ISO 12641 Graphic technology – Prepress digital data exchange – Colour targets for input scanner calibration
  • ISO/TS 12805:2011 Nanotechnologies – Materials specifications – Guidance on specifying nano-objects
  • ISO 12859/TR Intelligent transport systems – System architecture – Privacy aspects in ITS standards and systems
  • ISO 12944 Paints and varnishes – Corrosion protection of steel structures by protective paint systems
  • ISO 13007 Ceramic tiles – Grouts and adhesives
    • ISO 13007-1:2010 Terms, definitions and specifications for adhesives
    • ISO 13007-2:2010 Test methods for adhesives
    • ISO 13007-3:2010 Terms, definitions and specifications for grouts
    • ISO 13007-4:2010 Test methods for grouts
  • ISO/TR 13121:2011 Nanotechnologies – Nanomaterial risk evaluation
  • ISO 13239 Information technology – Telecommunications and information exchange between systems – High-level data link control (HDLC) procedures
  • ISO/IEC 13249 Information technology – Database languages – SQL multimedia and application
  • ISO/IEC 13250 Information technology – Topic Maps[Note 3]
  • ISO/IEC 13346 Information technology – Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange
  • ISO 13370 Thermal performance of buildings – Heat transfer via the ground – Calculation methods
  • ISO 13406-2:2001 Ergonomic requirements for work with visual displays based on flat panels – Part 2: Ergonomic requirements for flat panel displays [withdrawn 2008-11-14]
  • ISO 13450 Photography – 110-size cartridge, film and backing paper – Dimensions
  • ISO 13485:2003 Medical devices – Quality management systems – Requirements for regulatory purposes
  • ISO/IEC 13490 Information technology – Volume and file structure of read-only and write-once compact disk media for information interchange
  • ISO 13567 Technical product documentation – Organization and naming of layers for CAD
  • ISO/IEC 13568:2002 Information Technology – Z formal specification notation – Syntax, type system and semantics
  • ISO 13577 Industrial furnaces and associated processing equipment - Safety
    • ISO 13577-1 General requirements
  • ISO 13579 Industrial furnaces and associated processing equipment - Method of measuring energy balance and calculating efficiency
    • ISO 13579-1 General methodology
    • ISO 13579-2 Reheating furnaces for steel
    • ISO 13579-3 Batch-type aluminium melting furnaces
    • ISO 13579-4 Furnaces with protective or reactive atmosphere
  • ISO 13586:2000 Plastics - Determination of fracture toughness (GIC and KIC) -- Linear elastic fracture mechanics (LEFM) approach
  • ISO 13616 Financial services – International bank account number (IBAN)
  • ISO 13628 Petroleum and natural gas industries – Design and operation of subsea production systems
    • ISO 13628-1 General requirements and recommendations
    • ISO 13628-2 Unbonded flexible pipe systems for subsea and marine applications
    • ISO 13628-3 Through flowline (TFL) systems
    • ISO 13628-4 Subsea wellhead and tree equipment
    • ISO 13628-5 Subsea umbilicals
    • ISO 13628-6 Subsea production control systems
    • ISO 13628-7 Completion/workover riser systems
    • ISO 13628-8 Remotely Operated Vehicle (ROV) interfaces on subsea production systems
    • ISO 13628-9 Remotely Operated Tool (ROT) intervention systems
    • ISO 13628-10 Specification for bonded flexible pipe
    • ISO 13628-11 Flexible pipe systems for subsea and marine applications
  • ISO 13715 Technical drawings—Edges of undefined shape—Vocabulary and indications
  • ISO 13849 Safety of machinery – Safety related parts of control systems
  • ISO/IEC 13818 Information technology – Generic coding of moving pictures and associated audio information
  • ISO 13837 Road vehicles – Safety glazing materials – Method for the determination of solar transmittance
  • ISO 14000 Environmental management systems [This is a set of standards, rather than a single standard.]
  • ISO 14001 Environmental management systems – Requirements with guidance for use
  • ISO 14004:2004 Environmental management systems – General guidelines on principles, systems and support techniques
  • ISO 14031 Environmental management - Environmental performance evaluation – Guidelines
  • ISO 14050 Environmental management – Vocabulary
  • ISO 14051 Environmental management – Material flow cost accounting - General framework
  • ISO 14064 Greenhouse gases
  • ISO 14155:2011 Clinical investigation of medical devices for human subjects – Good clinical practice
  • ISO 14223 Radiofrequency [sic] identification of animals – Advanced transponders
  • ISO 14224 Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment
  • ISO 14230 Road vehicles – Diagnostic systems – Keyword Protocol 2000
    • ISO 14230-1 Physical layer
    • ISO 14230-2 Data link layer
    • ISO 14230-3 Application layer
    • ISO 14230-4 Requirements for emission-related systems
  • ISO/IEC 14443 Identification cards – Contactless integrated circuit cards – Proximity cards
  • ISO/IEC 14462 - Open-EDI Reference Model
  • ISO/IEC 14496 Information technology – Coding of audio-visual objects
  • ISO 14641 Electronic archiving
    • ISO 14641-1:2012 Specifications concerning the design and the operation of an information system for electronic information preservation
  • ISO 14644 Cleanrooms and associated controlled environments
    • ISO 14644-1:1999 Classification of air cleanliness
    • ISO 14644-2:2000 Specifications for testing and monitoring to prove continued compliance with ISO 14644-1
    • ISO 14644-3:2005 Test methods
    • ISO 14644-4:2001 Design, construction and start-up
    • ISO 14644-5:2004 Operations
    • ISO 14644-6:2007 Vocabulary
    • ISO 14644-7:2004 Separative devices (clean air hoods, gloveboxes, isolators and mini-environments)
    • ISO 14644-8:2006 Classification of airborne molecular contamination
  • ISO/IEC 14651 Information technology – International string ordering and comparison – Method for comparing character strings and description of the common template tailorable ordering
  • ISO 14698 Cleanrooms and associated controlled environments – Biocontamination control
    • ISO 14698-1 General principles and methods
    • ISO 14698-2 Evaluation and interpretation of biocontamination data
  • ISO/IEC 14750 Information technology – Open Distributed Processing – Interface Definition Language
  • ISO/IEC 14755 Information technology – Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
  • ISO 14801 Dentistry – Implants – Dynamic fatigue test for endosseous dental implants
  • ISO 14855-1 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions – Method by analysis of evolved carbon dioxide
  • ISO 14855-1:2005 General method
  • ISO 14855-2:2007 Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
  • ISO/IEC 14882 Programming Languages – C++
  • ISO 14915 Software ergonomics for multimedia user interfaces
    • ISO 14915-1:2002 Design principles and framework
    • ISO 14915-2:2003 Multimedia navigation and control
    • ISO 14915-3:2002 Media selection and combination
  • ISO 14971:2007 Medical devices – Application of risk management to medical devices
  • ISO/IEC 14977 Information technology – Syntactic metalanguage – Extended BNF

ISO 15000 – ISO 19999

  • ISO/TS 15000 Electronic business eXtensible Markup Language ebXML
    • ISO/TS 15000-1:2004 Collaboration-protocol profile and agreement specification (ebCPP)
    • ISO/TS 15000-2:2004 Message service specification (ebMS)
    • ISO/TS 15000-3:2004 Registry information model specification (ebRIM)
    • ISO/TS 15000-4:2004 Registry services specification (ebRS)
    • ISO/TS 15000-5:2005 ebXML. Core Components Technical Specification, Version 2.01(ebCCTS)
  • ISO 15022 Securities – Scheme for messages (Data Field Dictionary)
  • ISO 15082 Road vehicles – Tests for rigid plastic safety glazing materials
  • ISO 15099 Thermal performance of windows, doors and shading devices – Detailed calculations
  • ISO 15112 Natural gas – Energy determination
  • ISO 15189 Medical laboratories – Particular requirements for quality and competence
  • ISO 15223 Medical devices – Symbols to be used with medical device labels, labelling, and information to be supplied
  • ISO/IEC 15288 Systems and software engineering – System life cycle processes
  • ISO/IEC 15289 Systems and software engineering – Content of systems and software life cycle process information products (Documentation)
  • ISO/IEC 15291 Information technology – Programming languages – Ada Semantic Interface Specification (ASIS)
  • ISO 15403 Natural gas – Natural gas for use as a compressed fuel for vehicles
    • ISO 15403-1 Designation of the quality
  • ISO/IEC 15408 Information technology – Security techniques – Evaluation criteria for IT security
  • ISO/IEC 15414 - Open data processing - Reference Model - Enterprise Language
  • ISO/IEC 15434 Information technology – Automatic identification and data capture techniques – Syntax for high-capacity ADC media
  • ISO/IEC 15444 Information technology – JPEG 2000 image coding system
  • ISO/IEC 15445:2000 Information technology – Document description and processing languages – HyperText Markup Language (HTML)
  • ISO 15489-1:2001 Information and documentation – Records management – Part 1: General
  • ISO/TR 15489-2:2001 Information and documentation – Records management – Part 2: Guidelines
  • ISO/IEC 15504 Information technology – Process assessment
  • ISO 15614 Specification and qualification of welding procedures for metallic materials – Welding procedure test
  • ISO 15686 Buildings and constructed assets – Service life planning
  • ISO/IEC 15693 Identification cards – Contactless integrated circuit cards – Vicinity cards
  • ISO 15706 Information and documentation – International Standard Audiovisual Number (ISAN)
  • ISO 15707 Information and documentation – International Standard Musical Work Code (ISWC)
  • ISO 15783:2002 Seal-less rotodynamic pumps – Class II – Specification
  • ISO 15836 Information and documentation – The Dublin Core metadata element set
  • ISO/IEC 15897 Information technology – Procedures for registration of cultural elements
  • ISO 15924 Information and documentation – Codes for the representation of names of scripts
  • ISO 15926 - Integration of Life-cycle Data for Process Plants including Oil and Gas Production Facilities
  • ISO 15930 Graphic technology – Prepress digital data exchange using PDF[Note 3]
  • ISO/IEC 15944 - Business Agreement Semantic Descriptive Techniques
  • ISO/IEC 15948 Information technology – Computer graphics and image processing – Portable Network Graphics (PNG): Functional specification
  • ISO 15970 Natural gas – Measurement of properties – Volumetric properties: density, pressure, temperature and compression factor
  • ISO 15971:2008 Natural gas – Measurement of properties – Calorific value and Wobbe index
  • ISO 15985:2004 Plastics – Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions – Method by analysis of released biogas
  • ISO 16134 Earthquake- and subsidence-resistant design of ductile iron pipelines
  • ISO 16232 Road vehicles – Cleanliness of components of fluid circuits
    • ISO 16232-8 Particle nature determination by microscopic analysis
    • ISO 16232-9 Particle sizing and counting by automatic light extinction particle counter
    • ISO 16232-10 Expression of results
  • ISO/IEC 16262 Information technology – Programming languages, their environments and system software interfaces – ECMAScript language specification
  • ISO/IEC 16500 Information technology – Generic digital audio-visual systems
  • ISO 16549 Textiles – Unevenness of textile strands – Capacitance method
  • ISO 16750 Road vehicles – Environmental conditions and testing for electrical and electronic equipment
  • ISO/TS 16949 Quality management systems – Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
  • ISO/TR 16982:2002 Ergonomics of human-system interaction – Usability methods supporting human-centred design
  • ISO/IEC 17020:1998 General criteria for the operation of various types of bodies performing inspection
  • ISO/IEC 17024:2003 Conformity assessment – General requirements for bodies operating certification of persons
  • ISO/IEC 17025 General requirements for the competence of testing and calibration laboratories
  • ISO 17088:2012 Specifications for compostable plastics
  • ISO 17202 Textiles – Determination of twist in single spun yarns – Untwist/retwist method
  • ISO/PAS 17506 Industrial automation systems and integration – COLLADA digital asset schema specification for 3D visualization of industrial data
  • ISO 17776 Petroleum and natural gas industries – Offshore production installations – Guidelines on tools and techniques for hazard identification and risk assessment
  • ISO 17799 - Code of Practice for Information Security Management (superseded by ISO/IEC 27002)
  • ISO 17894 Ships and marine technology – Computer applications – General principles for the development and use of programmable electronic systems in marine applications
  • ISO/IEC 18000 Information technology – Radio frequency identification for item management
    • ISO/IEC 18000-1 Reference architecture and definition of parameters to be standardized
    • ISO/IEC 18000-2 Parameters for air interface communications below 135 kHz
    • ISO/IEC 18000-3 Parameters for air interface communications at 13,56 MHz
    • ISO/IEC 18000-4 Parameters for air interface communications at 2,45 GHz
    • ISO/IEC 18000-6 Parameters for air interface communications at 860 MHz to 960 MHz
    • ISO/IEC 18000-7 Parameters for active air interface communications at 433 MHz
  • ISO/IEC 18004 Information technology – Automatic identification and data capture techniques – QR Code 2005 bar code symbology specification
  • ISO/IEC 18009 Information technology – Programming languages – Ada: Conformity assessment of a language processor
  • ISO/IEC 18013 Information technology – Personal identification – ISO-compliant driving license
    • ISO/IEC 18013-1:2005 Physical characteristics and basic data set
    • ISO/IEC 18013-2:2008 Machine-readable technologies
    • ISO/IEC 18013-3:2009 Access control, authentication and integrity validation
  • ISO/IEC 18014 Information technology – Security techniques – Time-stamping services
  • ISO/IEC 18023 Information technology – SEDRIS
    • ISO/IEC 18023-1:2006 Functional specification
    • ISO/IEC 18023-2:2006 Abstract transmittal format
    • ISO/IEC 18023-3:2006 Transmittal format binary encoding
  • ISO/IEC 18024-4:2006 Information technology – SEDRIS language bindings – Part 4: C
  • ISO/IEC 18025:2005 Information technology – Environmental Data Coding Specification (EDCS)
  • ISO/IEC 18026 Information technology – Spatial Reference Model (SRM)
  • ISO/IEC 18033 Information technology – Security techniques – Encryption algorithms
    • ISO/IEC 18033-1 General
    • ISO/IEC 18033-2 Asymmetric ciphers
    • ISO/IEC 18033-3 Block ciphers
    • ISO/IEC 18033-4 Stream ciphers
  • ISO/IEC 18041-4 Information technology – Computer graphics, image processing and environmental data representation – Environmental Data Coding Specification (EDCS) language bindings – Part 4: C
  • ISO/IEC 18042-4:2006 Information technology – Computer graphics and image processing – Spatial Reference Model (SRM) language bindings – Part 4: C
  • ISO/IEC 18092 Information technology – Telecommunications and information exchange between systems – Near Field Communication – Interface and Protocol (NFCIP-1)
  • ISO 18117:2009 Surface chemical analysis – Handling of specimens prior to analysis
  • ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • ISO/TS 18152 Ergonomics of human-system interaction – Specification for the process assessment of human-system issues
  • ISO 18185 Freight containers – Electronic seals
  • ISO 18245 Retail financial services – Merchant category codes
  • ISO/TR 18529:2000 Ergonomics – Ergonomics of human-system interaction – Human-centred lifecycle process descriptions
  • ISO 18629 Industrial automation systems and integration – Process specification language
  • ISO 19005 Document management – Electronic document file format for long-term preservation
  • ISO 19011 Guidelines for quality and/or environmental management systems auditing
  • ISO 19092 Financial services – Biometrics – Security framework
  • ISO 19101 Geographic information – Reference model
  • ISO/TS 19103 Geographic information – Conceptual schema language
  • ISO/TS 19104 Geographic information – Terminology
  • ISO 19105 Geographic information – Conformance and testing
  • ISO 19106 Geographic information – Profiles
  • ISO 19107 Geographic information – Spatial schema
  • ISO 19108 Geographic information – Temporal schema
  • ISO 19109 Geographic information – Rules for application schema
  • ISO 19110 Geographic information – Methodology for feature cataloguing
  • ISO 19111 Geographic information – Spatial referencing by coordinates
  • ISO 19112 Geographic information – Spatial referencing by geographic identifiers
  • ISO 19113 Geographic information – Quality principles
  • ISO 19114 Geographic information – Quality evaluation procedures
  • ISO 19115 Geographic information – Metadata
  • ISO 19116 Geographic information – Positioning services
  • ISO 19117 Geographic information – Portrayal
  • ISO 19118 Geographic information – Encoding
  • ISO 19119 Geographic information – Services
  • ISO/TR 19120 Geographic information – Functional standards
  • ISO/TR 19121 Geographic information – Imagery and gridded data
  • ISO/TR 19122 Geographic information / Geomatics – Qualification and certification of personnel
  • ISO 19123 Geographic information – Schema for coverage geometry and functions
  • ISO 19125 Geographic information – Simple feature access
  • ISO 19126 Geographic information – Feature concept dictionaries and registers
  • ISO/TS 19127 Geographic information – Geodetic codes and parameters
  • ISO 19128 Geographic information – Web map server interface
  • ISO/TS 19129 Geographic information – Imagery, gridded and coverage data framework
  • ISO/TS 19130 Geographic information – Imagery sensor models for geopositioning
  • ISO 19131 Geographic information – Data product specifications
  • ISO 19132 Geographic information – Location-based services – Reference model
  • ISO 19133 Geographic information – Location-based services – Tracking and navigation
  • ISO 19134 Geographic information – Location-based services – Multimodal routing and navigation
  • ISO 19135 Geographic information – Procedures for item registration
  • ISO 19136 Geographic information – Geography Markup Language (GML)
  • ISO 19137 Geographic information – Core profile of the spatial schema
  • ISO/TS 19138 Geographic information – Data quality measures
  • ISO/TS 19139 Geographic information – Metadata – XML schema implementation
  • ISO 19141 Geographic information – Schema for moving features
  • ISO 19142 Geographic information – Web Feature Service
  • ISO 19143 Geographic information – Filter encoding
  • ISO 19144 Geographic information – Classification systems
  • ISO 19146 Geographic information – Cross-domain vocabularies
  • ISO 19156 Geographic information - Observations and measurements
  • ISO 19439 Enterprise integration – Framework for enterprise modelling
  • ISO 19440 Enterprise integration – Constructs for enterprise modelling
  • ISO/IEC 19501 Information technology – Open Distributed Processing – Unified Modeling Language (UML) Version 1.4.2
  • ISO/IEC 19502 Information technology – Meta Object Facility (MOF)
  • ISO/IEC 19503 Information technology – XML Metadata Interchange (XMI)
  • ISO/IEC 19752 Information technology – Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components
  • ISO/IEC 19757 Information technology – Document Schema Definition Languages (DSDL)
  • ISO/IEC 19770 Information technology – Software asset management
  • ISO/IEC 19785 Information technology – Common Biometric Exchange Formats Framework
  • ISO/IEC 19788 Information technology – Learning, education and training – Metadata for learning resources
  • ISO/IEC 19790 Information technology – Security techniques – Security requirements for cryptographic modules
  • ISO/IEC 19793 - Open Distributed Processing -- Use of UML for ODP system specifications
  • ISO/IEC 19794 Information technology – Biometric data interchange formats
    • ISO/IEC 19794-1:2011 Framework
    • ISO/IEC 19794-2:2005 Finger minutiae data
    • ISO/IEC 19794-3:2006 Finger pattern spectral data
    • ISO/IEC 19794-4:2005 Finger image data
    • ISO/IEC 19794-5:2005 Face image data
    • ISO/IEC 19794-6:2005 Iris image data
    • ISO/IEC 19794-7:2007 Signature/sign time series data
    • ISO/IEC 19794-8:2006 Finger pattern skeletal data
    • ISO/IEC 19794-9:2007 Vascular image data
    • ISO/IEC 19794-10:2007 Hand geometry silhouette data

ISO 20000 – ISO 29999

  • ISO/IEC 20000 Information technology – Service management
  • ISO 20022 Financial services – UNIversal Financial Industry message scheme
  • ISO 20653 Road vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access
  • ISO/IEC TR 20943 Information technology – Procedures for achieving metadata registry content consistency
    • ISO/IEC TR 20943-1:2003 Data elements
    • ISO/IEC TR 20943-3:2004 Value domains
  • ISO/IEC 21000 Information technology – Multimedia framework (MPEG-21)
  • ISO/IEC 21481 Information technology – Telecommunications and information exchange between systems – Near Field Communication Interface and Protocol -2 (NFCIP-2)
  • ISO 21482 Ionizing-radiation warning – Supplementary symbol
  • ISO 22000 Food safety management systems – Requirements for any organization in the food chain
  • ISO/TS 22003 Food safety management systems – Requirements for bodies providing audit and certification of food safety management systems
  • ISO 22093 Industrial automation systems and integration – Physical device control – Dimensional Measuring Interface Standard (DMIS)
  • ISO 22241 Diesel engines – NOx reduction agent AUS 32
    • ISO 22241-1 Quality requirements
    • ISO 22241-2 Test methods
    • ISO 22241-3 Handling, transportation and storing
  • ISO/IEC TR 22250 Information technology – Document description and processing languages – Regular Language Description for XML (RELAX)
    • ISO/IEC TR 22250-1:2002 RELAX Core
  • ISO 22301:2012 Societal security – Business continuity management systems – Requirements
  • ISO/PAS 22399:2007 Societal security – Guideline for incident preparedness and operational continuity management
  • ISO 22716:2007 Cosmetics – Good Manufacturing Practices (GMP) – Guidelines on Good Manufacturing Practices
  • ISO/IEC 23003 Information technology – MPEG audio technologies
    • ISO/IEC 23003-1 MPEG Surround
    • ISO/IEC 23003-2 Spatial Audio Object Coding (SAOC)
  • ISO/IEC 23270 Information technology – Programming languages – C#
  • ISO/IEC 23271 Information technology – Common Language Infrastructure (CLI)
  • ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1
    • ISO/IEC 23360-1 Generic specification
    • ISO/IEC 23360-2 Specification for IA32 architecture
    • ISO/IEC 23360-3 Specification for IA64 architecture
    • ISO/IEC 23360-4 Specification for AMD64 architecture
    • ISO/IEC 23360-5 Specification for PPC32 architecture
    • ISO/IEC 23360-6 Specification for PPC64 architecture
    • ISO/IEC 23360-7 Specification for S390 architecture
    • ISO/IEC 23360-8 Specification for S390X architecture
  • ISO 23733 Textiles – Chenille yarns – Test method for the determination of linear density
  • ISO 23950 Information and documentation – Information retrieval (Z39.50) – Application service definition and protocol specification
  • ISO/IEC 24707:2007 Information technology – Common Logic (CL): a framework for a family of logic-based languages
  • ISO/IEC 24727 Identification cards – Integrated circuit card programming interfaces
    • ISO/IEC 24727-1 Architecture
    • ISO/IEC 24727-2 Generic card interface
    • ISO/IEC 24727-3 Application interface
    • ISO/IEC 24727-4 Application programming interface (API) administration
    • ISO/IEC 24727-5 Testing procedures
    • ISO/IEC 24727-6 Registration authority procedures for the authentication protocols for interoperability
  • ISO/IEC 24744:2007 Software Engineering – Metamodel for Development Methodologies
  • ISO/IEC 24762:2008 Information technology – Security techniques – Guidelines for information and communications technology disaster recovery services
  • ISO 26000 Guidance on social responsibility
  • ISO/IEC 26300 Information technology – Open Document Format for Office Applications (OpenDocument) v1.0
  • ISO/IEC 27000 Information technology – Security techniques – Information security management systems – Overview and vocabulary
  • ISO/IEC 27001 Information technology – Security techniques – Information security management systems – Requirements
  • ISO/IEC 27002 Information technology – Security techniques – Code of practice for information security management
  • ISO/IEC 27003 Information technology – Security techniques – Information security management system implementation guidance
  • ISO/IEC 27004 Information technology – Security techniques – Information security management – Measurement
  • ISO/IEC 27005 Information technology – Security techniques – Information security risk management
  • ISO/IEC 27006 Information technology – Security techniques – Requirements for bodies providing audit and certification of information security management systems
  • ISO/IEC 27011 Information technology – Security techniques – Information security management guidelines for telecommunications organizations based on ISO/IEC 27002
  • ISO/IEC 27037:2012 Information technology – Security techniques – Guidelines for identification, collection, acquisition and preservation of digital evidence
  • ISO/TS 27687:2008 Nanotechnologies – Terminology and definitions for nano-objects – Nanoparticle, nanofibre and nanoplate
  • ISO 28000 Specification for security management systems for the supply chain
  • ISO 28001:2007 Security management systems for the supply chain – Best practices for implementing supply chain security, assessments and plans – Requirements and guidance
  • ISO 28003 Security management systems for the supply chain – Requirements for bodies providing audit and certification of supply chain security management systems
  • ISO 28004 Security management systems for the supply chain – Guidelines for the implementation of ISO 28000
  • ISO 28300:2008 Petroleum, petrochemical and natural gas industries – Venting of atmospheric and low-pressure storage tanks
  • ISO/IEC 29500 Information technology – Document description and processing languages – Office Open XML File Formats
    • ISO/IEC 29500-1 Fundamentals and Markup Language Reference
    • ISO/IEC 29500-2 Open Packaging Conventions
    • ISO/IEC 29500-3 Markup Compatibility and Extensibility
    • ISO/IEC 29500-4 Transitional Migration Features

ISO 30000 – ISO 39999

  • ISO 30000:2009 Ships and marine technology – Ship recycling management systems – Specifications for management systems for safe and environmentally sound ship recycling facilities
  • ISO 31000:2009 Risk management – Principles and guidelines
  • ISO/IEC 31010:2009 Risk management - Risk assessment techniques
  • ISO 32000 Document management – Portable document format
  • ISO/IEC 38500:2008 Corporate governance of information technology

ISO 80000

  • ISO/IEC 80000 Quantities and units
  • ISO/TS 80004 Nanotechnologies – Vocabulary
    • ISO/TS 80004-1 Core terms
    • ISO/TS 80004-3 Carbon nano-objects
    • ISO/TS 80004-4 Nanostructured materials
    • ISO/TS 80004-5 Nano/bio interface
    • ISO/TS 80004-7 Diagnostics and therapeutics for healthcare

See also

Notes

References

External links

  • International Organization for Standardization
ISO standards
Lists
List of ISO standards
List of ISO romanizations
List of IEC standards
Categories
ISO standards
ISO/IEC standards
OSI protocols
1–9999
10000–19999
20000+
See also
All articles with prefix "ISO"
Individual ISO Categories
ISO 639
ISO 3166
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.