World Library  
Flag as Inappropriate
Email this Article

Mechanical wave

Article Id: WHEBN0000162312
Reproduction Date:

Title: Mechanical wave  
Author: World Heritage Encyclopedia
Language: English
Subject: Earth and Its surface, Inertial wave, Acoustics, Wind-wave dissipation, Surface wave
Collection: Waves
Publisher: World Heritage Encyclopedia

Mechanical wave

Ripple in water is a surface wave.

A mechanical wave is a wave that is an oscillation of matter, and therefore transfers energy through a medium.[1] While waves can move over long distances, the movement of the medium of transmission—the material—is limited. Therefore, oscillating material does not move far from its initial equilibrium position. Mechanical waves transport energy. This energy propagates in the same direction as the wave. Any kind of wave (mechanical or electromagnetic) has a certain energy. Mechanical waves can be produced only in media which possess elasticity and inertia.

A mechanical wave requires an initial energy input. Once this initial energy is added, the wave travels through the medium until all its energy is transferred. In contrast, electromagnetic waves require no medium, but can still travel through one.

One important property of mechanical waves is that their amplitudes are measured in an unusual way, displacement divided by (reduced) wavelength. When this gets comparable to unity, significant nonlinear effects such as harmonic generation may occur, and, if large enough, may result in chaotic effects. For example, waves on the surface of a body of water break when this dimensionless amplitude exceeds 1, resulting in a foam on the surface and turbulent mixing. Some of the most common examples of mechanical waves are water waves, sound waves, and seismic waves.

There are three types of mechanical waves: transverse waves, longitudinal waves, and surface waves.


  • Transverse wave 1
  • Longitudinal wave 2
  • Surface waves 3
  • Examples 4
  • References 5

Transverse wave

Transverse waves cause the medium to vibrate at a right angle to the direction of the wave or energy being carried by the medium. Transverse waves have two parts—the crest and the trough. The crest is the highest point of the wave and the trough is the lowest. The distance between a crest and a trough is half of wavelength. The wavelength is the distance from crest to crest or from trough to trough.

To see an example, move an end of a Slinky (whose other end is fixed) to the left-and-right of the Slinky (as opposed to-and-fro the Slinky). Light also has properties of a transverse wave, although it is an electromagnetic wave.

Longitudinal wave

Longitudinal waves cause the medium to vibrate parallel to the direction of the wave. It consists of multiple compressions and rarefactions. The rarefaction is the farthest distance apart in the longitudinal wave and the compression is the closest distance together. The speed of the longitudinal wave is increased in higher index of refraction, due to the closer proximity of the atoms in the medium that is being compressed. Sound is considered a longitudinal wave.

Surface waves

This type of wave travels along a surface that is between two media. An example of a surface wave would be waves in a pool, or in an ocean, lake, or any other type of water body. There are two types of surface waves, namely Rayleigh waves and Love waves.

Rayleigh waves, also known as ground roll, are waves that travel as ripples with motion similar to those of waves on the surface of water. Rayleigh waves are much slower than body waves, roughly 90% of the velocity of body waves for a typical homogeneous elastic medium.

A Love wave is a surface waves having horizontal waves that are shear or transverse to the direction of propagation. They usually travel slightly faster than Rayleigh waves, about 90% of the body wave velocity, and have the largest amplitude.



  1. ^ Giancoli, D. C. (2009) Physics for scientists & engineers with modern physics (4th ed.). Upper Saddle River, N.J.: Pearson Prentice Hall.
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.