Metric Ton

This article is about the metric unit of mass. For other ton units, see Ton. For other uses, see Tonne (disambiguation).

The tonne (SI symbol: t) is a metric system unit of mass equal to 1,000 kilograms (2,204.6 pounds) or 1 megagram (1 Mg). It is a non-SI unit accepted for use with SI.[1][2] To avoid confusion with the much smaller short ton and the slightly larger long ton, it is also known as a metric ton in the United States.[3]

Symbol and abbreviations

The SI symbol for the tonne is "t". It is also the symbol supported by the US National Institute of Standards and Technology.[4] Non-approved abbreviations for tonne and "metric ton" include "T", "mT", "MT", and "mt",[5] and "Te" (particularly in the offshore and nuclear industries). SI has no abbreviations for SI units, only symbols, and some of the abbreviations in use are actually SI symbols for other units: "T" is the SI symbol for the tesla and "Mt" is the SI symbol for megatonne.

Origin and spelling

In French and all English-speaking countries that are predominantly metric, tonne is the correct spelling in writing. It is usually pronounced the same as ton /tʌn/, but when it is important to clarify that the metric term is meant, rather than short ton, the final "e" can also be pronounced /ˈtʌnɪ/[6] In Australia, it is also pronounced /tɒn/.[7]

Before metrication in the UK the unit used for most purposes was the Imperial ton of 2,240 pounds avoirdupois (usually referred to as the long ton in the US), equivalent to 1,016 kg, differing by just 1.6% from the tonne. The UK Weights and Measures Act 1985 explicitly excluded from use for trade many units and terms, including the ton and the term "metric tonne".[8] However, for many purposes the Imperial ton and the tonne are so similar that it is not important to distinguish them, even in writing, and the spelling "ton" is still often used where "tonne" is meant. For example, even the Guinness Book of World Records accepts metrication without marking this by changing the spelling. In the United States metric ton is the name for this unit used and recommended by NIST;[4] an unqualified mention of a ton almost invariably refers to a short ton of 2,000 pounds (907 kg), and tonne is rarely used in speech or writing.

Ton and tonne are both derived from a Germanic word in general use in the North Sea area since the Middle Ages (cf. Old English and Old Frisian tunne, Old High German and Medieval Latin tunna, German and French tonne) to designate a large cask, or tun.[9] A full tun, standing about a metre high, could easily weigh a tonne. An English tun (an old wine cask volume measurement equivalent to 954 litres) of wine weighs roughly a ton (of any type), 954 kg if full of water, a little less for wine.

The spelling tonne pre-dates the introduction of the SI in 1960; it has been used with this meaning in France since 1842,[10] when there were no metric prefixes for multiples of 106 and above, and is now used as the standard spelling for the metric mass measurement in most English-speaking countries.[11][12][13][14] In the United States, the unit was originally referred to using the French words millier or tonneau,[15] but these terms are now obsolete.[3] The Imperial and US customary units comparable to the tonne are both spelled ton in English, though they differ in mass.


One tonne is equivalent to:

  • One megagram (by definition):
    • megagram, Mg, is the official SI term, but rarely used. Mg is distinct from mg, milligram.
  • Template:Sfrac pounds (exactly, by definition of the pound).[16]
    • approximately 2,205 lb.
  • 98.42% of a long ton.
    • One long ton (2,240 lb) is 101.605% of a tonne.
  • 110.23% of a short ton.
    • One short ton (2,000 lb) is 90.72% of a tonne.

Derived units

For multiples of the tonne, it is more usual to speak of millions of tonnes; kilotonne, megatonne, and gigatonne are more usually used for the energy of nuclear explosions and other events and are often used loosely as approximate figures. When used in this context, there is little need to distinguish between metric and other tons, and the unit has been spelt either as ton or tonne with the relevant prefix attached.[17]

Tonnes Grams
Multiple Name Symbol Multiple Name Symbol
100 tonne t 106 megagram Mg
103 kilotonne kt 109 gigagram Gg
106 megatonne Mt 1012 teragram Tg
109 gigatonne Gt 1015 petagram Pg
1012 teratonne Tt 1018 exagram Eg
1015 petatonne Pt 1021 zettagram Zg
1018 exatonne Et 1024 yottagram Yg

Though non-standard, the symbol "kt" is also sometimes used for knot, a unit of speed for sea-going vessels, and should not be confused with kilotonne.

Alternative usage

A metric ton unit (MTU) can mean 10 kilograms (22 lb) within metal (e.g. tungsten, manganese) trading, particularly within the US. It traditionally referred to a metric ton of ore containing 1% (i.e. 10 kg) of metal.[18][19]

In the case of uranium, the acronym MTU is sometimes considered to be metric ton of uranium, meaning 1,000 kg.[20][21][22][23]

In the petroleum industry the tonne of oil equivalent (toe) is a unit of energy: the amount of energy released by burning one tonne of crude oil, approximately 42 GJ. There are several slightly different definitions.

A gigatonne of Carbon dioxide equivalent (GtCO2eq) is a unit used by the UN climate change panel, IPCC, to measure the effect of a technology or process on global warming.

Use of mass as proxy for energy

Main article: TNT equivalent

The tonne of trinitrotoluene (TNT) is used as a proxy for energy, usually of explosions (TNT is a common high explosive). Prefixes are used: kiloton(ne), megaton(ne), gigaton(ne), especially for expressing nuclear weapon yield, based on a specific combustion energy of TNT of about 4.2 MJ/kg (or one thermochemical calorie per milligram). Hence, 1 kt TNT = 4.2 TJ, 1 Mt TNT = 4.2 PJ.

The SI unit of energy is the joule. Assuming that a TNT explosion releases 1,000 small (thermochemical) calories per gram (4.2 kJ/g), one tonne of TNT is equivalent to 4.2 gigajoules.

Unit of force

Like the gram and the kilogram, the tonne gave rise to a (now obsolete) force unit of the same name, the tonne-force, equivalent to about 9.8 kilonewtons: a unit also often called simply "tonne" or "metric ton" without identifying it as a unit of force. In contrast to the tonne as a mass unit, the tonne-force or metric ton-force is not acceptable for use with SI, partly because it is not an exact multiple of the SI unit of force, the newton.

See also

Notes and references

External links

  • NIST Special Publication 811,

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.