World Library  
Flag as Inappropriate
Email this Article

Schweizer 300


Schweizer 300

Hughes/Schweizer 300 series
Schweizer 300CB
Role Light utility and trainer helicopter
Manufacturer Hughes Helicopters
Schweizer Aircraft Corporation
Sikorsky Aircraft
Introduction 1964
Status In production
Produced 1964-1983 (Hughes)
Number built 2800 (Hughes)[1]
Unit cost
US $250,000 (300C in 2001)
Developed from TH-55 Osage
Developed into Schweizer 330/333
Sikorsky Firefly

The Sikorsky S-300 (formerly Hughes 300 and Schweizer 300) family of light utility helicopters was originally produced by Hughes Helicopters, as a development of the Hughes 269. Later manufactured by Schweizer Aircraft, the basic design has been in production for almost 50 years. The single, three-bladed main rotor and piston-powered S-300 is mostly used as a cost-effective platform for training and agriculture.



In 1955, Hughes Tool Company's Aircraft Division (later Hughes Helicopters) carried out a market survey which showed that there was a demand for a low-cost, lightweight two-seat helicopter. The division began building the Model 269 in September 1955. The prototype flew on 2 October 1956,[1] but it wasn't until 1960 that the decision was made to develop the helicopter for production.

On 9 April 1959, the 269 received certification from the Federal Aviation Administration (FAA) and Hughes continued to concentrate on civil production. With some design changes, deliveries of the Model 269A version began in 1961. By mid-1963 about 20 aircraft were being produced a month and by the spring of 1964, 314 had been built. Hughes had successfully captured a large portion of the civilian helicopter market[1] with an aircraft that would prove itself popular in agriculture, police work and other duties.

Model 300

In 1964, Hughes introduced the slightly-larger three-seat Model 269B which it marketed as the Hughes 300. That same year, the Hughes 269 set an endurance record of 101 hours. To set the record, two pilots took turns piloting the aircraft and hovered in ground-effect for fueling. To ensure no cheating, eggs were affixed to the bottom of the skid gear to register any record-ending landing.[1]

The Hughes 300 was followed in 1969 by the improved Hughes 300C (sometimes 269C), which first flew on 6 March 1969 and received FAA certification in May 1970. This new model introduced a more powerful 190 hp (140 kW) Lycoming HIO-360-D1A engine and increased diameter rotor, giving a payload increase of 45%, plus overall performance improvements.[2] It was this model that Schweizer began building under license from Hughes in 1983.[3]

In 1986, Schweizer acquired all rights to the helicopter from McDonnell Douglas, which had purchased Hughes Helicopters in 1984. After Schweizer acquired the FAA Type Certificate, the helicopter was known for a short time as the Schweizer-Hughes 300C and then simply, the Schweizer 300C. The basic design remained unchanged over the years, despite Schweizer making over 250 minor improvements.

Schweizer was purchased on August 26, 2004 by Sikorsky Aircraft. The Schweizer 300 models fill a gap in the Sikorsky helicopter line, which is known for its medium and heavy utility and cargo helicopters.[4]

In February 2009, the 300C was rebranded as the Sikorsky S-300C.[5]


Between Hughes and Schweizer, and including foreign-licensed production civil and military training aircraft, nearly 3,000 units of the Model 269/300 have been built and flown over the last 50 years. Schweizer continued to develop the Model 300 by adding a turbine and redesigning the body to create the Schweizer 330. Further developing the dynamic components to take greater advantage of the power of the turbine engine led to the development of the Schweizer S-333.


The Hughes 269 was created with a fully articulated, counter-clockwise rotating, three-bladed main rotor, and a two-bladed tail rotor that would remain as distinctive characteristics of all its variants. It also has shock absorber-dampened, skid-type landing gear. The flight controls are directly linked to the control surfaces of the helicopter so there are no hydraulics in the 269. There are generally two sets of controls, although this was optional on the civil 269A. For three-seat aircraft, the middle collective control stick is removable and a seat cushion can be put in its place for the third passenger. In the 300CB and 300CBi, the collective control can be repositioned to left-handed configuration for the Pilot In Command position (right seat).


269C "Model 300C" 
The 300C was powered by a 190 hp (141 kW) Lycoming HIO-360-D1A and had a larger diameter main rotor (26 ft 10 in compared to 25 ft 4 in). The larger rotor and engine giving it a 45% performance increase over previous 269-models. Hughes and Schweizer both marketed the 269C as the Model 300C.
The Sky Knight is a purpose built 300C for urban police helicopter patrols with a muffler and other noise attenuating materials and design changes to reduce the helicopter's noise signature by 75%.
The 300CB is the first pure production of the 300 by Schweizer and is powered by a Textron Lycoming HO-360-C1A, 180 hp engine. The 300CB first flew on 28 May 1993, and was certified by the FAA in August 1995. The 300CB can be reconfigured from a two-seat cockpit, to a three-seat configuration. And, while it is still suited for utility and special missions, this aircraft is designed to target helicopter training.
A fuel injected version of the 300CB that alleviates carburetor icing concerns in colder temperatures. The 300CBi also includes overspeed protection and automatic rotor engagement during startup as well as a low rotor RPM warning system.


 El Salvador
 United States

Specifications (Schweizer 300C)

Data from International Directiory of Civil Aircraft[3]

General characteristics
  • Crew: 1 pilot
  • Capacity: 2 passengers
  • Payload: 950 lb (431 kg)
  • Length: 30 ft 10 in (9.4 m)
  • Rotor diameter: 26 ft 10 in (8.2 m)
  • Height: 8 ft 9 in (2.7 m)
  • Disc area: 565 ft2 (52.8 m2)
  • Empty weight: 1100 lb (499 kg)
  • Loaded weight: 2050 lb (930 kg)
  • Max. takeoff weight: 2050 lb (930 kg)
  • Powerplant: 1 × Textron Lycoming HIO-360-D1A 4 cylinder, horizontally opposed, 190 hp (141 kW)


See also

Aviation portal

Related development
Aircraft of comparable role, configuration and era


  • FAA Type Certificate 4H12

External links

  • Schweizer 300CBi pages on
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.