 #jsDisabledContent { display:none; } My Account | Register | Help Flag as Inappropriate This article will be permanently flagged as inappropriate and made unaccessible to everyone. Are you certain this article is inappropriate?          Excessive Violence          Sexual Content          Political / Social Email this Article Email Address:

Article Id: WHEBN0000028299
Reproduction Date:

 Title: Steradian Author: World Heritage Encyclopedia Language: English Subject: Collection: Publisher: World Heritage Encyclopedia Publication Date: A graphical representation of 1 steradian.
The sphere has radius r, and in this case the area A of the highlighted surface patch is r2. The solid angle Ω equals A sr/r2 which is 1 sr in this example. The entire sphere has a solid angle of sr.
Unit information
Unit system SI derived unit
Unit of Solid angle
Symbol

The steradian (symbol: sr) or squared radian is the SI unit of solid angle. It is used in three-dimensional space, and functions analogously to the manner in which the radian quantifies planar angles. The name is derived from the Greek stereos for "solid" and the Latin radius for "ray, beam".

The steradian, like the radian, is dimensionless, essentially because a solid angle is the ratio between the area subtended and the square of its distance from the vertex: both the numerator and denominator of this ratio have dimension length squared (i.e., L²/L² = Φ - no unit). It is useful, however, to distinguish between dimensionless quantities of different nature, so in practice the symbol "sr" is used to indicate a solid angle. For example, radiant intensity can be measured in watts per steradian (W·sr−1). The steradian was formerly an SI supplementary unit, but this category was abolished from the SI in 1995 and the steradian is now considered an SI derived unit.

Definition Section of cone (1) and spherical cap (2) that subtend a solid angle of one steradian inside a sphere

A steradian can be defined as the solid angle subtended at the center of a unit sphere by a unit area on its surface. For a general sphere of radius r, any portion of its surface with area A = r2 subtends one steradian.

The solid angle is related to the area it cuts out of a sphere:

\Omega = \frac{A}{r^2}\,\mathrm{sr} \,
where
A is the surface area of the spherical cap, 2πrh,
r is the radius of the sphere, and
sr is the unit, steradian.

Because the surface area A of a sphere is 4πr2, the definition implies that a sphere measures 4π (≈ 12.56637) steradians. By the same argument, the maximum solid angle that can be subtended at any point is 4π sr.

Other properties

Since A = r2, it corresponds to the area of a spherical cap (A = 2πrh) (wherein h stands for the "height" of the cap), and the relationship h/r = 1/(2π) holds. Therefore one steradian corresponds to the plane (i.e. radian) angle of the cross-section of a simple cone subtending the plane angle , with θ given by:

\begin{align} \theta & = \arccos \left( \frac{r-h}{r} \right)\\ & = \arccos \left( 1 - \frac{h}{r} \right)\\ & = \arccos \left( 1 - \frac{1}{2\pi} \right) \approx 0.572 \,\text{ rad,} \mbox{ or } 32.77^\circ. \end{align}

This angle corresponds to the plane aperture angle of 2θ ≈ 1.144 rad or 65.54°.

A steradian is also equal to the spherical area of a polygon having an angle excess of 1 radian, to 1/(4π) of a complete sphere, or to (180/π)2 ≈ 3282.80635 square degrees.

The solid angle of a cone whose cross-section subtends the angle 2θ is:

\Omega = 2\pi\left(1 - \cos\theta\right)\,\mathrm{sr}.

In two dimensions, an angle is related to the arc length it cuts out:

where
l is arc length,
r is the radius of the circle, and

Now in three dimensions, the solid angle is related to the area it cuts out:

\Omega = \frac{A}{r^2}\,\mathrm{sr}
where
A is the surface area of the spherical cap, 2πrh,
r is the radius of the sphere, and
sr is the steradian.

SI multiples

A complete sphere subtends only 4π ≈ 12.56637 steradians, so multiples larger than the decasteradian are rarely used.

Multiple Name Symbol May be visualized as...
101 decasteradian dasr Surface area of the Americas plus liquid water on Earth, relative to Earth (cyan on map)

All constellations except those of the zodiac together subtend 0.992 dasr.

100 steradian sr Area of Oceania plus Asia excluding Russia, relative to Earth (yellow on map)

The Heavenly Waters constellation family subtends 1.16 sr.

10−1 decisteradian dsr Area of Algeria plus Libya, relative to Earth (green on map)

The constellation Lupus subtends 1.02 dsr.

10−2 centisteradian csr Area of Zimbabwe, relative to Earth (blue on map)

The smallest constellation, Crux subtends 2.09 csr.

10−3 millisteradian msr Area of Switzerland, relative to Earth (red on map)

The Earth, viewed from the Moon, subtends 1.2 msr.

10−6 microsteradian µsr Area of Costa Mesa, California, relative to Earth

The Sun and the Moon, viewed from Earth, each subtends 60 µsr.

10−9 nanosteradian nsr About 8 American football fields, relative to Earth

Mars, viewed from Earth at its closest approach, subtends 11 nsr.

10−12 picosteradian psr Area of a small apartment, relative to Earth

Pluto, viewed from Earth at its closest approach, subtends 0.24 psr.

10−15 femtosteradian fsr Area of a sheet of A5 paper, relative to Earth

Alpha Centauri A, viewed from Earth, subtends 0.9 fsr.

10−18 attosteradian asr Area of a quarter-inch square, relative to Earth

Proxima Centauri, viewed from Earth, subtends 20 asr.

10−21 zeptosteradian zsr Cross-sectional area of 32 gauge wire, relative to Earth
10−24 yoctosteradian ysr Surface area of a red blood cell, relative to Earth

Notes and references

1. ^ "Steradian", McGraw-Hill Dictionary of Scientific and Technical Terms, fifth edition, Sybil P. Parker, editor in chief. McGraw-Hill, 1997. ISBN 0-07-052433-5.
2. ^ 10.0 sr (404 million km² out of 510 million km²)
3. ^ 1.01 sr (40.8 million km² out of 510 million km²)
4. ^ 0.102 sr (4.14 million km² out of 510 million km²)
5. ^ 0.00963 sr (391 000 km² out of 510 million km²); Paraguay, at 0.0100 sr (407 000 km²) is closer to 1 csr, but has been shaded for the 10 sr region as part of the Americas
6. ^ 0.00102 sr (41 300 km² out of 510 million km²)
7. ^ Near-side/far-side impact crater counts | NASA Lunar Science Institute
8. ^ 0.00000100 sr (40.7 km² out of 510 million km²)
9. ^ π × (25.113 / 60 / 60 / 2)2 / 3282.80635 × 1000000000
10. ^ π × (0.115 / 60 / 60 / 2)2 / 3282.80635 × 1000000000
11. ^ π × (0.007 / 60 / 60 / 2)2 / 3282.80635 × 1000000000
12. ^ π × (0.001 / 60 / 60 / 2)2 / 3282.80635 × 1000000000
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.

Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.

By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.