World Library  
Flag as Inappropriate
Email this Article

Stout Skycar

Article Id: WHEBN0024727556
Reproduction Date:

Title: Stout Skycar  
Author: World Heritage Encyclopedia
Language: English
Subject: Rearwin Sportster, Funk B, Hamilton H-47, Harlow PJC-2, Chase XC-123A
Collection: United States Civil Utility Aircraft 1930–1939
Publisher: World Heritage Encyclopedia

Stout Skycar

Stout Skycar
The Skycar I, as later modified, on display in the National Air and Space Museum workshops, Silver Hill, Maryland in June 1982
Role two-seat light aircraft
National origin United States
Manufacturer Stout Engineering Laboratory
Designer William B. Stout
First flight 1931
Introduction 1931
Status Skycar I preserved
Number built 4

The Stout Skycar was a series of four one-off American-built light aircraft of the 1930s.


  • Development 1
  • Operational history 2
  • Variants 3
  • Specifications (Skycar I) 4
  • References 5
  • External links 6


William Bushnell Stout was a prolific designer of road vehicles and aircraft, including the Ford Trimotor series. He was founder of the Stout Metal Airplane Division of the Ford Motor Company and in 1931 designed the Skycar which was specified for easy handling and provided with automobile-style comfort. Single examples of four variations on the basic design were produced between 1931 and 1944.[1]

The Skycar I was first displayed at the spring 1931 Detroit Show. The aircraft was a two-seat high-wing monoplane, accommodating the occupants in tandem layout. It had an all-metal steel-tube frame covered with corrugated metal skin. Centre-line nose and tail-wheels plus a standard landing gear were fitted. The rear fuselage was constructed from an open framework carrying a single fin and rudder, inside which was located the rear pusher engine.[2] The Sky Car was displayed with a Moorhouse engine (Alfred Moorhouse of Detroit, assignor to Packard Motor Car Company). Fuel was carried in two tanks in the leading portion of the central section of the engine housing, from where it was fed by gravity to the engine.[3] At a later date the aircraft was fitted with twin booms carrying the single fin and rudder (see photo of preserved aircraft). The aircraft featured balanced pivoting outboard wingtips rather than ailerons.[4] Stout attempted to design a simple aircraft that would have controls similar to early model Fords including the ignition switch and the starter button. Stout planned to build the Sky Car (i.e. its original name was "Sky Car" but various newspaper and magazine articles spelled it "Skycar") [5] and sell it at the price of a moderately priced car (approximately $2000) if mass-produced in numbers.[6]

The Skycar II of 1941 was a higher-powered version utilising stainless steel construction and twin tail booms. The four-wheel landing gear was intended to facilitate a later rebuild to roadability which never occurred. It was built with support from Fred Fisher of General Motors.[7]

The Skycar III of 1943 had a higher-powered Lycoming engine to enable operation at higher gross weight, but was otherwise simailar to the Skycar II.[8]

The Skycar IV of 1944 was also known as the Spratt-Stout Model 8 and the Convair 103. It was similar to the Skycar III with twin tail-booms, but fitted with twin fins and rudders.[9]

Operational history

The Skycar I, sometimes referred to as the Model 11-W. It was flown as a personal aircraft by Stout for several years [10] and was later donated to the Smithsonian Institution. It is on display in the National Air and Space Museum at Dulles Airport Virginia.[11]

The Skycar II was evaluated by the United States Army Air Forces (USAAF) as the XC-65 light transport. It was destroyed in a hangar fire circa 1942.[12]

The Skycar III was tested by the USAAF as the XC-107.[13]


(per Aerofiles)

Skycar I
75 hp (56 kW) Michigan Rover R-267 pusher engine, later 90 hp (67 kW) Warner Junior. (1 built)
Skycar II
90 hp (67 kW)Franklin O-200 pusher engine. Gross weight 1550 lbs. (1 built)
Skycar III
125 hp (93 kW) Lycoming O-290 pusher engine. Gross weight 1825 lbs. (1 built)
Skycar IV
90 hp (67 kW) Franklin 4ACG pusher engine, later 125 hp (93 kW) Lycoming O-290C. (1 built)
Weick W1
Fred Weick of NACA with permission, built his own aircraft based roughly on the skycar for safety and control tests. The tested features were later applied to his ERCO Ercoupe design.

Specifications (Skycar I)

Data from Aerofiles

General characteristics
  • Crew: 1
  • Capacity: 1 passenger
  • Length: 24 ft 0 in ( m)
  • Wingspan: 43 ft 0 in ( m)
  • Useful lift: 480 lb ( kg)
  • Powerplant: 1 × Michigan Rover R-267, 75 hp ( kW)


  • Maximum speed: 95 mph ( km/h)
  • Cruise speed: 80 mph ( km/h)
  • Stall speed: 35 mph ( km/h)
  • Range: 320 miles ( km)


  1. ^ Aerofiles
  2. ^ Aerofiles
  3. ^ Flight
  4. ^ Air Progress: 18. November 1978. 
  5. ^ , June 1931Popular Mechanics"Air Flivver Built Like Auto Lands on Tennis Court"
  6. ^ "Air Flivver Ready To Fly Weighs Only 1,000 Pounds", June 1931, Popular Science article on Skycar I
  7. ^ Aerofiles
  8. ^ Aerofiles
  9. ^ Aerofiles
  10. ^ Aerofiles
  11. ^ Ogden, 2007, p. 534
  12. ^ Aerofiles
  13. ^ Aerofiles
  • Flight 17 April 1931 p. 334. Flight. 1931. 
  • Ogden, Bob (2007). Aviation Museums and Collections of North America. Air-Britain (Historians) Ltd.  

External links

  • Aerofiles data and photos of the Skycars
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.