World Library  
Flag as Inappropriate
Email this Article


Article Id: WHEBN0002025632
Reproduction Date:

Title: Superalloy  
Author: World Heritage Encyclopedia
Language: English
Subject: Turbine blade, Waspaloy, Metallurgy, Atmospheric entry, Exploratory engineering
Collection: Aerospace Materials, Emerging Technologies, Metallurgy, Superalloys
Publisher: World Heritage Encyclopedia


Nickel superalloy jet engine (RB199) turbine blade

A superalloy, or high-performance alloy, is an alloy that exhibits excellent mechanical strength and resistance to creep (tendency for solids to slowly move or deform under stress) at high temperatures; good surface stability; and corrosion and oxidation resistance. Superalloys typically have a matrix with an austenitic face-centered cubic crystal structure. A superalloy's base alloying element is usually nickel, cobalt, or nickel-iron. Superalloy development has relied heavily on both chemical and process innovations and has been driven primarily by the aerospace and power industries. Typical applications are in the aerospace, industrial gas turbine and marine turbine industries, e.g. for turbine blades for hot sections of jet engines, and bi-metallic engine valves for use in diesel and automotive applications.

Examples of superalloys are Hastelloy, Inconel (e.g. IN100, IN600, IN713), Waspaloy, Rene alloys (e.g. Rene 41, Rene 80, Rene 95, Rene N5), Haynes alloys, Incoloy, MP98T, TMS alloys, and CMSX (e.g. CMSX-4) single crystal alloys.

Superalloys are commonly used in parts of gas turbine engines that are subject to high temperatures and require high strength, excellent high temperature creep resistance, fatigue life, phase stability, and oxidation and corrosion resistance.

Superalloys develop high temperature strength through solid solution strengthening. The most important strengthening mechanism is through the formation of secondary phase precipitates such as gamma prime and carbides through precipitation strengthening. Oxidation and corrosion resistance is provided by the spraying of a thermal barrier coating (TBC). Oxidation or corrosion resistance is provided by elements such as aluminium and chromium.

Air cooling (such as the air cooling holes seen in the picture above) can cool the components and allow them to operate under oxidising or corrosive conditions. The air cooling protects the base material from thermal effects as well as from corrosion and oxidation. If air cooling is used it is usually used for the high-pressure turbine, where air-cooled blades can face temperatures 200 °C above the melting temperature of the superalloy used.

Turbine Inlet Temperature (TIT), which is a direct parameter controlling the efficiency of a gas turbine engine, depends on the temperature capability of 1st stage high-pressure turbine blade. This component is exclusively made of nickel base superalloys.

Turbocharger turbines also use superalloys, typically electron beam welded to a steel shaft. Common superalloys in this application are for instance Inconel 713 and Mar-M 247. The latter is particularly useful for gasoline engines as it reduces the need for fuel enrichment at high loads, which improve engine efficiency.

They are also used where corrosion by media would rule-out other metal materials (e.g.) instead of stainless steel in acidic or saltwater environments.

Superalloys (such as Nimonic 80A) are also used in the poppet valves of piston engines, both for diesel and gasoline engines. This is either in the form of a single solid valve or as a bi-metallic valve. The corrosions resistance is particularly useful when dealing with the high temperatures and pressures found in a diesel engine. The superalloys resist pitting and degradation allowing operating conditions that would not be possible with regular stainless steel.

Additional applications of superalloys include: gas turbines (commercial and military aircraft, power generation, and marine propulsion); space vehicles; submarines; nuclear reactors; military electric motors; racing and high-performance vehicles, chemical processing vessels, bomb casings and heat exchanger tubing.


  • Chemical development 1
  • Process development 2
  • Metallurgy of superalloys 3
  • Coating of superalloys 4
    • Pack cementation process 4.1
    • Gas phase coating 4.2
    • Bond coat 4.3
  • Research and development of new superalloys 5
  • See also 6
  • References 7
    • Bibliography 7.1
  • External links 8

Chemical development

Because these alloys are intended to be used for high temperature applications, in addition to these materials being able to withstand loading at temperatures near their melting point, their creep and oxidation resistance are of primary importance. Ni based superalloys have emerged as the material of choice for these applications.[1] The properties of these Ni based superalloys can be tailored to a certain extent through the addition of many other elements, both common and exotic, including not only metals, but also metalloids and nonmetals; chromium, iron, cobalt, molybdenum, tungsten, tantalum, aluminium, titanium, zirconium, niobium, rhenium, yttrium, vanadium, carbon, boron or hafnium are some examples of the alloying additions used. Each of these additions has been chosen to serve a particular purpose in optimizing the properties for high temperature application.

Creep resistance is dependent on slowing the speed of dislocation motion within a crystal structure. In modern Ni based superalloys the γ’-Ni3(Al,Ti) phase present acts as a barrier to dislocation motion. For this reason, this γ’ intermetallic phase, when present in high volume fractions, drastically increases the strength of these alloys due to its ordered nature and high coherency with the γ matrix. The chemical additions of aluminum and titanium promote the creation of the γ’ phase. The γ’ phase size can be precisely controlled by careful precipitation strengthening heat treatments. Many superalloys are produced using a two-phase heat treatment that creates a dispersion of cuboidal γ’ particles known as the primary phase, with a fine dispersion between these known as secondary γ’. In order to improve the oxidation resistance of these alloys, Al, Cr, B, and Y are added. The Al and Cr form oxide layers that passivate the surface and protect the superalloy from further oxidation while B and Y are used to improve the adhesion of this oxide scale to the substrate.[2] Cr, Fe, Co, Mo and Re all preferentially partition to the γ matrix while Al, Ti, Nb, Ta, and V preferentially partition to the γ’ precipitates and solid solution strengthen the matrix and precipitates respectively. In addition to solid solution strengthening, if grain boundaries are present, certain elements are chosen for grain boundary strengthening. B and Zr tend to segregate to the grain boundaries which reduces the grain boundary energy and results in better grain boundary cohesion and ductility.[3] Another form of grain boundary strengthening is achieved through the addition of C and a carbide former, such as Cr, Mo, W, Nb, Ta, Ti, or Hf, which drives precipitation of carbides at grain boundaries and thereby reduces grain boundary sliding.

While Ni based superalloys are excellent high temperature materials and have proven very useful, Co based superalloys potentially possess superior hot corrosion, oxidation, and wear resistance as compared to Ni based superalloys. For this reason, efforts have also been put into developing Co based superalloys over the past several years. Despite that, traditional Co based superalloys have not found widespread usage because they have a lower strength at high temperature than Ni based superalloys.[4] The main reason for this is that they appear to lack the γ’ precipitation strengthening that is so important in the high temperature strength of Ni based superalloys. However, there has been a recent discovery of a stable γ’-Co3(Al,W) intermetallic compound with the L12 structure. The two-phase microstructure consists of cuboidal γ’ precipitates embedded in a continuous γ matrix and is therefore morphologically identical to the microstructure observed in Ni based superalloys. Like in the Ni based system, there is a high degree of coherency between the two phases which is one of the main factors resulting in the superior strength at high temperatures. This provides a pathway for the development of a new class of load-bearing Co based superalloys for application in severe environments.[5] In addition to the fact that many of the properties of these new Co based superalloys could be better than those of the more traditional Ni based ones, Co also has a higher melting temperature than Ni. Therefore, if the high temperature strength could be improved, the development of novel Co based superalloys could allow for an increase in jet engine operation temperature resulting in an increased efficiency.

Process development

The historical developments in superalloy processing have brought about considerable increases in superalloy operating temperatures. Superalloys were originally iron based and cold wrought prior to the 1940s. In the 1940s investment casting of cobalt base alloys significantly raised operating temperatures. The development of vacuum melting in the 1950s allowed for very fine control of the chemical composition of superalloys and reduction in contamination and in turn led to a revolution in processing techniques such as directional solidification of alloys and single crystal superalloys.[6]

There are many forms of superalloy present within the gas turbine engine. In order to have fracture resistance, the disks of the high pressure turbine are polycrystalline, which are usually cast and then forged into shape. The cast discs have a large columnar grain structure and contain chemical segregation. The polycrystalline discs can also be made by investment casting. The polycrystalline blades can contain either columnar grains or equiaxed grains. Columnar grain structured blades are created using directional solidification techniques and have grains parallel to the major stress axes while equiaxed grain structured blades are prone to creep deformation.

Single-crystal superalloys (SX or SC superalloys) are formed as a single crystal using a modified version of the directional solidification technique, so there are no grain boundaries in the material. The mechanical properties of most other alloys depend on the presence of grain boundaries, but at high temperatures, they would participate in creep and must be replaced by other mechanisms. In many such alloys, islands of an ordered intermetallic phase sit in a matrix of disordered phase, all with the same crystalline lattice. This approximates the dislocation-pinning behavior of grain boundaries, without introducing any amorphous solid into the structure.

Metallurgy of superalloys

The microstructure of most precipitation strengthened nickel-base superalloys consists of the gamma matrix, and of intermetallic γ' precipitates. The γ-phase is a solid solution with a face-centered crystal (fcc) lattice and randomly distributed different species of atoms. By contrast, the γ'-phase has an ordered crystalline lattice of type LI2. Modern alloys typically contain about 70% by volume fraction of cube-like γ' precipitates whose edge length is about 0.5 μm.

In pure Ni3Al phase atoms of aluminium are placed at the vertices of the cubic cell and form the sublattice A. Atoms of nickel are located at centers of the faces and form the sublattice B. The phase is not strictly stoichiometric. There may exist an excess of vacancies in one of the sublattices, which leads to deviations from stoichiometry. Sublattices A and B of the γ'-phase can solute a considerable proportion of other elements. The alloying elements are dissolved in the γ-phase as well. The γ'-phase hardens the alloy through an unusual mechanism called the yield strength anomaly. Dislocations dissociate in the γ'-phase, leading to the formation of an anti-phase boundary. It turns out that at elevated temperature, the free energy associated with the anti-phase boundary (APB) is considerably reduced if it lies on a particular plane, which by coincidence is not a permitted slip plane. One set of partial dislocations bounding the APB cross-slips so that the APB lies on the low-energy plane, and, since this low-energy plane is not a permitted slip plane, the dissociated dislocation is now effectively locked. By this mechanism, the yield strength of γ'-phase Ni3Al actually increases with temperature up to about 1000 °C, giving superalloys their currently unrivalled high-temperature strength.

Initial material selection for blade applications in vacuum induction casting technologies were introduced in the 1950s.[7] This process significantly improved cleanliness, reduced defects, and increased the strength and temperature capability of the material.

Modern superalloys were developed in the 1980s with the advent of single crystal, or monocrystal, solidification techniques (see Bridgman technique) for superalloys that enable grain boundaries to be entirely eliminated from a casting. Because the material contained no grain boundaries, carbides were unnecessary as grain boundary strengthers and were thus eliminated. Additionally, the volume fraction of the γ' precipitates increased to about 50-70%. The first generation superalloys incorporated increased Aluminium, Titanium, Tantalum, and Niobium content in order to increase the γ' volume fraction in these alloys. Examples of first generation superalloys include: PWA1480, René N4 and SRR99.[7]

The second and third generation superalloys introduced about 3 and 6 weight per cent Rhenium, for increased temperature capability. Examples of second generation superalloys include PWA1484, CMSX-4 and René N5. Third generation alloys include CMSX-10, and René N6. Fourth, Fifth, and even Sixth generation superalloys have been developed which incorporate Ruthenium additions, making them more expensive still than the prior generation's Re-containing alloys.

The current trend is to avoid very expensive and very heavy elements. A possible remedy to this is Eglin steel, a budget material with compromised temperature range and chemical resistance. It does not contain rhenium or ruthenium and its nickel content is limited. To reduce fabrication costs, it was chemically designed to melt in a ladle (though with improved properties in a vacuum crucible). Also, conventional welding and casting is possible before heat-treatment. The original purpose was to produce high-performance, inexpensive bomb casings, but the material has proven widely applicable to structural applications, including armor.

In addition, it is often beneficial for grain boundaries that the nickel-base superalloy contains carbides (or boron or zirconium) for improvements in creep strength. Where the carbides (e.g. MC where M is a metal and C is a carbon atom) are precipitated at the grain boundaries, they act to pin the grain boundaries and improve the resistance to sliding and climbing and migration that would occur during creep diffusion. However if they precipitate as a continuous grain boundary film, the fracture toughness of the alloy may be reduced, together with the ductility and rupture strength.

Coating of superalloys

Superalloy products that are subjected to high working temperatures and corrosive atmosphere (such as high pressure turbine region of jet engines) are coated with various kinds of coating. Mainly two kinds of coating process are applied: pack cementation process and gas phase coating. Both are a type of chemical vapor deposition (CVD). In most cases, after the coating process near-surface regions of parts are enriched with aluminium, the matrix of the coating being nickel aluminide.

Pack cementation process

The pack cementation process is carried out at lower temperatures, about 750 °C. The parts are loaded into boxes that contain a mixture of powders: active coating material, containing aluminum, activator (chloride or fluoride), and thermal ballast, like aluminum oxide. At high temperatures the gaseous aluminum chloride is transferred to the surface of the part and diffuses inside (mostly inward diffusion). After the end of the process the so-called "green coating" is produced, which is too thin and brittle for direct use. A subsequent diffusion heat treatment (several hours at temperatures about 1080 °C) leads to further inward diffusion and formation of the desired coating.

Gas phase coating

This process is carried out at higher temperatures, about 1080 °C. The coating material is usually loaded onto special trays without physical contact with the parts to be coated. The coating mixture contains active coating material and activator, but usually does not contain thermal ballast. As in the pack cementation process, the gaseous aluminium chloride (or fluoride) is transferred to the surface of the part. However, in this case the diffusion is outwards. This kind of coating also requires diffusion heat treatment.

Bond coat

The bond coat adheres the thermal barrier coating to the superalloy substrate. Additionally, the bond coat provides oxidation protection and functions as a diffusion barrier against the motion of substrate atoms towards the environment.

There are three major types of bond coats, the aluminides, the platinum-aluminides, and MCrAlY. For the aluminide bond coatings, the final composition and structure of the coating depends on the composition of the substrate. Aluminides also lack ductility below 750 °C, and exhibit a limited by thermomechanical fatigue strength.

The Pt-aluminides are very similar to the aluminide bond coats except for a layer of Pt (5-10 μm) deposited on the blade. The Pt is believed to aid in oxide adhesion and contributes to hot corrosion. The cost of Pt plating is justified by the increased blade life span.

The MCrAlY is the latest generation of bond coat and does not strongly interact with the substrate. The Chromium provides oxidation and hot-corrosion resistance. The aluminum controls oxidation mechanisms by limiting oxide growth. The yttrium enhances the oxide adherence to the substrate. Investigation indicates that addition of rhenium and tantalum increases oxidation resistance.

Research and development of new superalloys

The availability of superalloys during past decades has led to a steady increase in the turbine entry temperatures and the trend is expected to continue. Sandia National Laboratories is studying a new method for making superalloys, known as radiolysis. It introduces an entirely new area of research into creating alloys and superalloys through nanoparticle synthesis. This process holds promise as a universal method of nanoparticle formation. By developing an understanding of the basic material science behind these nanoparticle formations, there is speculation that it might be possible to expand research into other aspects of superalloys.

There may be considerable disadvantages in making alloys by this method. About half of the use of superalloys is in applications where the service temperature is close to the melting temperature of the alloy. It is common therefore to use single crystals. The above method produces polycrystalline alloys, which suffer from an unacceptable level of creep.

Future paradigm in alloy development focus on reduction of weight, improving oxidation and corrosion resistance while maintaining the strength of the alloy. Furthermore, with the increasing demand for turbine blade for power generation, another focus of alloy design is to reduce the cost of super alloys.

See also


  1. ^ Reed, Roger C. The Superalloys: Fundamentals and Applications. Cambridge, UK: Cambridge UP, 2006.
  2. ^ Klein, L., Y. Shen, M. S. Killian, and S. Virtanen. "Effect of B and Cr on the High Temperature Oxidation Behavior of Novel γ/γ′Strengthened Co-base Superalloys." Corrosion Science 53 (2011): 2713-720.
  3. ^ Shinagawa, K., Toshihiro Omori, Katsunari Oikawa, Ryosuke Kainuma, and Kiyohito Ishida. "Ductility Enhancement by Boron Addition in Co–Al–W High-temperature Alloys." Scripta Materialia 61.6 (2009): 612-15.
  4. ^ Sato, J. "Cobalt-Base High-Temperature Alloys." Science 312.5770 (2006): 90-91.
  5. ^ Suzuki, A., Garret C. DeNolf, and Tresa M. Pollock. "Flow Stress Anomalies in γ/γ′ Two-phase Co–Al–W-base Alloys." Scripta Materialia 56.5 (2007): 385-88.
  6. ^ C. Sims, N. Stoloff, W. Hagel, Superalloys II: High Temperature Materials for Aerospace and Industrial Power, 1987, John Wiley & Sons
  7. ^ a b c The Superalloys. Fundamentals and ApplicationsR.C. Reed,
  8. ^ D. Bombač, M. Fazarinc, G. Kugler, S. Spajić, Microstructure development of Nimonic 80A superalloys during hot deformation, Materials and Geoenvironment, 55:3 (2008) 319-328.


  • Levitin, Valim (2006). High Temperature Strain of Metals and Alloys: Physical Fundamentals. WILEY-VCH.  

External links

  • Extensive resource on Superalloys, Cambridge University
  • TMS - Superalloys: A Primer and History
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.