World Library  
Flag as Inappropriate
Email this Article

Kilogram-force

Article Id: WHEBN0000425290
Reproduction Date:

Title: Kilogram-force  
Author: World Heritage Encyclopedia
Language: English
Subject: Horsepower, Mass versus weight, JGR Class 7170, Bridge near Limyra, Newton metre
Collection: Non-Si Metric Units, Units of Force
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Kilogram-force

The kilogram-force (kgf or kgF), or kilopond (kp, from Latin pondus meaning weight), is a gravitational metric unit of force. It is equal to the magnitude of the force exerted by one kilogram of mass in a 9.80665 m/s2 gravitational field (standard gravity, a conventional value approximating the average magnitude of gravity on Earth).[1] Therefore one kilogram-force is by definition equal to 9.80665 N.[2][3] Similarly, a gram-force is 9.80665 mN, and a milligram-force is 9.80665 µN. One kilogram-force is approximately 2.204622 pounds-force.

Kilogram-force is a non-standard unit and does not comply with the SI Metric System.

Contents

  • History 1
  • Related units 2
  • See also 3
  • References 4
  • External links 5

History

The gram-force and kilogram-force were never well-defined units until the CGPM adopted a standard acceleration of gravity of 980.665 cm/s2 for this purpose in 1901, though they had been used in low-precision measurements of force before that time. The kilogram-force has never been a part of the International System of Units (SI), which was introduced in 1960. The SI unit of force is the newton.

Prior to this, the unit was widely used in much of the world and it is still in use for some purposes. The thrust of a rocket engine, for example, was measured in kilograms-force in 1940s Germany, in the Soviet Union (where it remained the primary unit for thrust in the Russian space program until at least the late 1980s), and it is still used today in China and sometimes by the European Space Agency.

The term Kilopond has been declared obsolete[4] and should no longer be used.

It is also used for tension of bicycle spokes,[5] for informal references to pressure in kilograms per square centimeter (1 kp/cm2) which is the technical atmosphere (at) and very close to 1 bar and the standard atmosphere (atm), for the draw weight of bows in archery, and to define the "metric horsepower" (PS) as 75 metre-kiloponds per second.[2]

Three approaches to metric mass and force units[6][7]
Base force, length, time weight, length, time mass, length, time
Force (F) F = ma = wa/g F = ma/gc = wa/g F = ma = wa/g
Weight (w) w = mg w = mg/gcm w = mg
System GM M CGS MTS SI
Acceleration (a) m/s2 m/s2 Gal m/s2 m/s2
Mass (m) hyl kg g t kg
Force (F) kp kp dyn sn N
Pressure (p) at atm Ba pz Pa

Related units

The tonne-force, metric ton-force, megagram-force, and megapond (Mp) are each 1000 kilograms-force.

The decanewton or dekanewton (daN) is used in some fields as an approximation to the kilogram-force, being exactly rather than approximately 10 newtons.

Units of force
newton
(SI unit)
dyne kilogram-force,
kilopond
pound-force poundal
1 N ≡ 1 kg⋅m/s2 = 105 dyn ≈ 0.10197 kp ≈ 0.22481 lbF ≈ 7.2330 pdl
1 dyn = 10−5 N ≡ 1 g⋅cm/s2 ≈ 1.0197 × 10−6 kp ≈ 2.2481 × 10−6 lbF ≈ 7.2330 × 10−5 pdl
1 kp = 9.80665 N = 980665 dyn gn⋅(1 kg) ≈ 2.2046 lbF ≈ 70.932 pdl
1 lbF ≈ 4.448222 N ≈ 444822 dyn ≈ 0.45359 kp gn⋅(1 lb) ≈ 32.174 pdl
1 pdl ≈ 0.138255 N ≈ 13825 dyn ≈ 0.014098 kp ≈ 0.031081 lbF ≡ 1 lb⋅ft/s2
The value of gn as used in the official definition of the kilogram-force is used here for all gravitational units.

See also

References

  1. ^ The international system of units (SI)United States Department of Commerce, NIST Special Publication 330, 2008, p. 52
  2. ^ a b NIST Guide for the Use of the International System of Units (SI) Special Publication 811, (1995) page 51
  3. ^ BIPM SI brochure, chapter 2.2.2.
  4. ^ European Economic Community, Council Directive of 18 October 1971 on the approximation of the laws of the Member States relating to units of measurement (Directive 71/354/EEC), Annex, Chapter III.
  5. ^  
  6. ^ Michael R. Lindeburg (2011). Civil Engineering Reference Manual for the Pe Exam. Professional Publications.  
  7. ^ Wurbs, Ralph A, Fort Hood Review Sessions for Professional Engineering Exam (PDF), retrieved October 26, 2011 

External links

  • Measurement of forces by comparison to the kilogram-force unit (video)
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.