World Library  
Flag as Inappropriate
Email this Article

Acoustic Doppler current profiler

Article Id: WHEBN0002868301
Reproduction Date:

Title: Acoustic Doppler current profiler  
Author: World Heritage Encyclopedia
Language: English
Subject: Sonar, Hydroacoustics, Oceanographic instrumentation, Ocean currents, Physical oceanography
Collection: Ocean Currents, Oceanographic Instrumentation, Physical Oceanography, Sonar
Publisher: World Heritage Encyclopedia

Acoustic Doppler current profiler

Side view of an ADCP from Teledyne, one only sees two of the four transducers (in red). The battery pack requires most of the space (light grey cylinder)

An acoustic Doppler current profiler (ADCP or ADP) is a hydroacoustic current meter similar to a sonar, attempting to measure water current velocities over a depth range using the Doppler effect of sound waves scattered back from particles within the water column. The term ADCP is used synonymously for all kind of acoustic current meters although the abbreviation originates from the name of an instrument series by Teledyne.[1] ADCPs have been commercially available since the late 1980s. The working frequencies range from 38 kHz to several megahertz.


  • Working principle 1
  • Applications 2
    • Bottom tracking 2.1
  • Advantages and disadvantages 3
  • References 4

Working principle

ADCPs contain piezoelectric oscillators to transmit and receive sound signals. The traveling time of sound waves gives an estimate of the distance, the red or blue shift can be converted to a velocity. To measure 3D velocities, at least three vector components have to be estimated, this is why the instrument typically has four of them.

Head of an ADCP with the four transducers

Further components of an ADCP are an electronic amplifier, a receiver, a mixer, a clock to measure the traveling time, a temperature sensor, a compass to know the relative rotation, and a pitch/roll sensor to know the horizontal. An analog-to-digital converter and a digital signal processor are required to sample the returning signal in order to determine the Doppler shift. A micro processor evaluates the sound velocity at the instrument position using the seawater equation of state, and uses this to estimate the velocities. This procedure assumes that the same density in the water column nearby is mainly determined by temperature, i.e. that the salinity has a preconfigured constant value. Finally, the results are saved on a memory card.


Depending on the mounting, one can distinguish between side-listening, downward- and upward looking ADCPs. A bottom-mounted ADCP can measure the speed and direction of currents at equal intervals all the way to the surface. Mounted sideways on a wall or bridge piling in rivers or canals it can measure the current profile from bank to bank. In very deep water they can be lowered on cables from the surface.[2]

The primary usage is for oceanography.[3] The instruments can also be used in rivers and canals to measure continuously the discharge measurements.

Mounted on moorings within the water column or directly at the seabed, water current and wave studies may be performed. They can stay underwater for years at a time, the limiting factor is the lifetime of the battery pack. Depending on the nature of the deployment the instrument usually has the ability to be powered from shore, using the same umbilical cable for data communication. Deployment duration can be extended by a factor of three by substituting lithium battery packs for the standard alkaline packs.

Some harbor managers also use ADCPs to nowcast tides and local currents which helps them to optimize the ship traffic in a busy port. Another application is the measurement of water flow through sewer pipes.

Bottom tracking

By adjusting the signal processing, ADCPs can be employed as acoustic doppler velocity log, this feature is usually called bottom-track. Sound waves bouncing off the sea floor can be used to determine the velocity vector of the device. Combining this with a position fix, compass heading, and data from the acceleration sensors (typically by use of a Kalman filter), the position of the vehicle with the ADCP can be determined. This may help to navigate submarines, autonomous, and remotely operated underwater vehicles.

Advantages and disadvantages

The major advantage of ADCPs is no moving parts are used which may be subject to biofouling. Besides, a single instrument is enough to cover up to 1000 m of water column, this allows more accurate estimations of flow patterns.

However, the cost per device of roughly tens of thousands of euros is relatively high. Considering the assumptions made – constant temperature and salinity – the choice of a mechanical instrument might be more appropriate where one of the variables is non-constant, i.e. within the thermocline (depth range with prominent temperature gradient) or halocline (salinity changing with depth). NOTE: that when significant stratification is present, the horizontal velocities that are measured by the ADCP are correct, but the vertical velocities and the ranges to the cells could be in error by up to 3% if there is a 35psu difference across the thermocline.

As any acoustical instrument, it contributes to noise pollution in the ocean which may interfere with cetacean navigation and echolocation.[4] The effect depends on the frequency and the power of the instrument but most ships already have one or more echo sounders which also contribute to noise pollution.


  1. ^ "Acoustic Doppler Current Profilers" (PDF). Hydro International. Retrieved 2014-05-22. 
  2. ^ "Acoustic Doppler Current Profiler (ADCP)". Woods Hole Oceanographic Institution. Retrieved 2014-05-22. 
  3. ^ William J. Emery, Richard E. Thomson (2001). Data analysis methods in physical oceanography. Gulf Professional Publishing. p. 83.  
  4. ^ Hogan, C Michael (October 2011). "Icon Encyclopedia of Earth Topics". Washington, D.C.: Environmental Information Coalition, National Council for Science and the Environment. Retrieved 2012-09-13. 
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.