World Library  
Flag as Inappropriate
Email this Article

Autoignition temperature

Article Id: WHEBN0000316737
Reproduction Date:

Title: Autoignition temperature  
Author: World Heritage Encyclopedia
Language: English
Subject: Chembox/testcases3, Jet fuel, Chembox/testcases2, Chembox/testcases7images, Ethylene oxide
Collection: Chemical Properties, Fire, Threshold Temperatures
Publisher: World Heritage Encyclopedia

Autoignition temperature

The autoignition temperature or kindling point of a substance is the lowest temperature at which it will spontaneously ignite in normal atmosphere without an external source of ignition, such as a flame or spark. This temperature is required to supply the activation energy needed for combustion. The temperature at which a chemical will ignite decreases as the pressure or oxygen concentration increases. It is usually applied to a combustible fuel mixture.

Autoignition temperatures of liquid chemicals are typically measured using a 500 mL flask placed in a temperature controlled oven in accordance with the procedure described in ASTM E659.[1]

When measured for plastics, autoignition temperature can also be measured under elevated pressure and at 100% oxygen concentration. The resulting value is used as a predictor of viability for high-oxygen service. The main testing standard for this is ASTM G72.[2]


  • Autoignition equation 1
  • Autoignition point of selected substances 2
  • See also 3
  • References 4
  • External links 5

Autoignition equation

The time t_{ig}\, it takes for a material to reach its autoignition temperature T_{ig}\, when exposed to a heat flux q''\, is given by the following equation

t_{ig} = \left ( \frac{\pi}{4} \right ) \left (k \rho c \right )\left [ \frac{T_{ig}-T_{o}}{q''} \right]^2 [3]

where k = thermal conductivity (W/(m·K)), ρ = density (kg/m³), and c = specific heat capacity (J/(kg·K)) of the material of interest. T_{o}\, is the temperature, in Kelvin, the material starts at (or the temperature of the bulk material), and q''\, is the heat flux (W/m²) incident to the material.

Autoignition point of selected substances

Temperatures vary widely in the literature and should only be used as estimates. Factors which may cause variation include partial pressure of oxygen, altitude, humidity, and amount of time required for ignition. Generally the auto-ignition temperature for hydrocarbon/air mixtures decreases with increasing molecular weight and increasing chain length. The auto-ignition temperature is also higher for branched-chain hydrocarbons than for straight-chain hydrocarbons.[4]

Substance Autoignition (°C)[5] Autoignition (°F)[5] Note
Triethylborane −20 °C −4 °F
Silane 21 °C 70 °F or below
White phosphorus 34 °C 93 °F on contact with an melts otherwise
Carbon disulfide 90 °C 194 °F
Diethyl ether 160 °C 320 °F [6]
Gasoline (Petrol) 247–280 °C 477–536 °F [7]
Ethanol 363 °C 685 °F [7]
Diesel or Jet A-1 210 °C 410 °F [8] or below
Butane 405 °C 761 °F [9]
Paper 218–246 °C 424–475 °F [10][8]
Leather / Parchment 200–212 °C 392–414 °F [8][11]
Magnesium 473 °C 883 °F
Hydrogen 536 °C 997 °F [12]

For paper, there is considerable variation between sources, mainly because there are many physical variables over different kinds of paper, like thickness, density and composition; in addition, it takes longer for the combustion of paper to start at lower temperatures,[13] see Fahrenheit 451.

See also


  1. ^ E659 – 78 (Reapproved 2000), "Standard Test Method for Autoignition Temperature of Liquid Chemicals", ASTM, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959
  2. ^ S. Grynko, "Material Properties Explained" (2012), ISBN 1-4700-7991-7, p. 46.
  3. ^ Principles of Fire Behavior. ISBN 0-8273-7732-0. 1998.
  4. ^ Zabetakis, M.G. (1965), Flammability characteristics of combustible gases and vapours, U.S. Department of Mines, Bulletin 627.
  5. ^ a b Under standard conditions for pressure.
  6. ^ "Diethyl Ether - Safety Properties". Wolfram|Alpha. 
  7. ^ a b Fuels and Chemicals - Autoignition Temperatures, 
  8. ^ a b c Cafe, Tony. "PHYSICAL CONSTANTS FOR INVESTIGATORS". TC Forensic P/L. Retrieved 11 February 2015. 
  9. ^ "Butane - Safety Properties". Wolfram|Alpha. 
  10. ^ Tony Cafe. "Physical Constants for Investigators". Journal of Australian Fire Investigators.  (Reproduced from "Firepoint" magazine)
  11. ^ "Flammability and flame retardancy of leather". Leather International / Global Trade Media. Retrieved 11 February 2015. 
  12. ^ "Hydrogen - Safety Properties". Wolfram|Alpha. 
  13. ^ Forest Products Laboratory (1964). "Ignition and charring temperatures of wood" (PDF). Forest Service U. S. Department of Agriculture. 

External links

  • Analysis of Effective Thermal Properties of Thermally Thick Materials.
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.