World Library  
Flag as Inappropriate
Email this Article

Bristol Pegasus

Article Id: WHEBN0000146928
Reproduction Date:

Title: Bristol Pegasus  
Author: World Heritage Encyclopedia
Language: English
Subject: Bristol Jupiter, Walter Aircraft Engines, Westland PV.7, Vickers Vildebeest, Bristol Aeroplane Company
Publisher: World Heritage Encyclopedia

Bristol Pegasus

Preserved Bristol Pegasus on display at the Brooklands Museum. The red circles are temporary blanking plates removed when the exhaust manifold is fitted
Type Piston aero engine
Manufacturer Bristol Aeroplane Company
First run c.1932
Major applications Fairey Swordfish
Short Sunderland
Vickers Wellington
Number built c.32,000
Developed from Bristol Jupiter
Developed into Bristol Draco
Bristol Phoenix

The Bristol Pegasus is a British nine-cylinder, single-row, air-cooled radial aero engine. Designed by Roy Fedden of the Bristol Aeroplane Company it was used to power both civil and military aircraft of the 1930s and 1940s. Developed from the earlier Mercury and Jupiter engines, later variants could produce 1,000 horsepower (750 kW) from its capacity of 1,750 cubic inches (28 L) by use of a geared supercharger.

Further developments of the Pegasus created the fuel-injected Bristol Draco and the diesel cycle Bristol Phoenix, both types being produced in limited numbers. In contrast, by the end of production over 30,000 Pegasus engines had been built. Aircraft applications ranged from single-engine biplanes to the four-engined Short Sandringham and Sunderland flying boats. Several altitude and distance records were set by aircraft using the Pegasus.

The Bristol Siddeley company reused the name many years later for the turbofan engine used in the Hawker Siddeley Harrier and which became known as the Rolls-Royce Pegasus when Rolls-Royce took over that company. Two Bristol Pegasus engines remain airworthy in 2010, powering Fairey Swordfish aircraft operated by the Royal Navy Historic Flight, other examples are preserved and on public display in aviation museums.

Design and development

The Pegasus was designed by Sir Roy Fedden as the follow-on to the Bristol Aeroplane Company's very successful Bristol Jupiter, using lessons learned in development of the Mercury. Although having a capacity (25 L) almost 15% smaller, the Mercury produced about as much power as the Jupiter, through a combination of supercharging to improve the "charge", and various changes to increase the operating RPM. The power of a piston engine can be calculated by multiplying the charge per cylinder by the number of cycles per second; the Mercury improved both and thereby produced more power for a given size. The primary advantage was a much improved power-to-weight ratio due to better volumetric efficiency.[1]

Bristol Pegasus fitted to a Fairey Swordfish

The Pegasus was the same size, displacement and general steel/aluminium construction as the Jupiter, but various improvements allowed the maximum engine speed to be increased from 1,950 to 2,600 rpm for take-off power. This improved performance considerably from the Jupiter's 580 hp (430 kW), to the first Pegasus II with 635 hp (474 kW), to 690 hp (515 kW) in the first production model Pegasus III, and eventually to the late-model Pegasus XXII with 1,010 hp (750 kW) thanks to the two-speed supercharger (introduced on the Pegasus XVIII) and 100-octane fuel. This gave rise to the claim "one pound per horsepower" reflecting the excellent power-to-weight ratio.

Some notable users of the Pegasus were the Fairey Swordfish, Vickers Wellington, and Short Sunderland. It was also used on the Anbo 41, Bristol Bombay, Saro London, Short Empire, Vickers Wellesley and the Westland Wallace. Like the Jupiter before it, the Pegasus was also licensed by the PZL company in Poland. It was used on the PZL.23 Karaś and PZL.37 Łoś bombers. In Italy Alfa Romeo built both the Jupiter (126-RC35) and the Pegasus under licence, with the engine based on the Pegasus designated as the Alfa Romeo 126-RC34 with the civil version as the 126-RC10.[2] In Czechoslovakia it was built by Walter Engines and was known as the Pegas.[3]

Approximately 32,000 Pegasus engines were built.[1] The Pegasus set three height records in the Bristol Type 138: in 1932, 1936 and 1937. It was used for the first flight over Mount Everest in the Westland Wallace, and in 1938 set the world's long-distance record in Vickers Wellesleys.[4]


The Pegasus was produced in many variants, early prototype engines were unsupercharged but the majority used a geared supercharger, either single-speed or two-speed. Variant differences included compression ratios, propeller reduction gear ratios and accessories.



Engines on display

Bristol Pegasus engines can be viewed installed in aircraft at the Royal Air Force Museum London and the Imperial War Museum Duxford. An unrestored Pegasus recovered from the sea bed is in the care of the Bristol Aero Collection, which is closed while moving from Kemble Airport to Filton. There is also an engine on display at the Brooklands Museum at Weybridge.


As of October 2010 two Bristol Pegasus engines remain airworthy in England. They power the two Fairey Swordfish aircraft operated by the Royal Navy Historic Flight.[7]

Specifications (Pegasus XVIII)

Bristol Pegasus engine with some components labelled

Data from Lumsden.[8]

General characteristics

  • Type: 9-cylinder, single-row, supercharged, air-cooled radial engine
  • Bore: 5.75 in (146 mm)
  • Stroke: 7.5 in (190 mm)
  • Displacement: 1,753 in³ (28.7 L)
  • Length: 61 in (1,549 mm)
  • Diameter: 55.3 in (1,405 mm)
  • Dry weight: 1,111 lb (504 kg)



  • Power output:
  • 965 hp (720 kW) at 2,475 rpm for takeoff at sea level
  • 835 hp (623 kW) at 2,250 rpm at 8,500 ft (2,590 m), maximum continuous climb power
  • 965 hp (720 kW) at 2,600 rpm at 13,000 ft (3,960 m), maximum power (emergency combat - 5 minutes only)
  • Specific power: 0.55 hp/in³ (25 kW/L)
  • Compression ratio: 6.25:1
  • Specific fuel consumption: 0.52 lb/(hp·h) (319 g/(kW·h))
  • Oil consumption: 0.28 oz/(hp·h) (11 g/(kW·h))
  • Power-to-weight ratio: 0.86 hp/lb (1.42 kW/kg)

See also

Related development
Comparable engines
Related lists



  1. ^ a b Lumsden 2003, p.104.
  2. ^
  3. ^ Walter engines history - Retrieved: 3 August 2009
  4. ^ Bridgman (Jane's) 1998, p.270.
  5. ^ List from Lumsden (British aircraft only), the Pegasus may not be the main powerplant for these types
  6. ^ Barnes 1970 p242
  7. ^ Royal Navy Historic Flight - Aircraft Retrieved: 13 October 2010
  8. ^ Lumsden 2003, p.112.


  • Bridgman, L, (ed.) (1998) Jane's fighting aircraft of World War II. Crescent. ISBN 0-517-67964-7
  • Gunston, Bill. World Encyclopedia of Aero Engines. Cambridge, England. Patrick Stephens Limited, 1989. ISBN 1-85260-163-9
  • Gunston, Bill. Development of Piston Aero Engines. Cambridge, England. Patrick Stephens Limited, 2006. ISBN 0-7509-4478-1
  • Lumsden, Alec. British Piston Engines and their Aircraft. Marlborough, Wiltshire: Airlife Publishing, 2003. ISBN 1-85310-294-6.

Further reading

  • Gunston, Bill. Development of Piston Aero Engines. Cambridge, England. Patrick Stephens Limited, 2006. ISBN 0-7509-4478-1

External links

  • Bristol Pegasus at the Bristol Aero Collection
  • , 1932FlightBristol Pegasus use in altitude record -
  • "Improving the Breed" a 1936 Flight article on the Pegasus and Mercury
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.