World Library  
Flag as Inappropriate
Email this Article

Delta wing

Article Id: WHEBN0000142764
Reproduction Date:

Title: Delta wing  
Author: World Heritage Encyclopedia
Language: English
Subject: Fixed-wing aircraft, Vortex lift, Fairey Delta 1, Chengdu J-10, Mikoyan-Gurevich MiG-21
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Delta wing

HAL Tejas of the Indian air force has a tailless delta wing configuration
The MiG-21 had a tailed delta wing configuration (with a conventional tail)
The delta wing Avro Vulcan bomber

The delta wing is a wing shaped in the form of a triangle. It is named for its similarity in shape to the Greek uppercase letter delta (Δ).

History

Early deltas

Triangular stabilizing fins for rockets were described ca. 1529-1556 by Conrad Haas and in the 17th century by Kazimierz Siemienowicz.[1][2][3]

The lifting delta wing was pioneered by Alexander Lippisch in Germany after WWI, initially using a very gentle angle so that the wing appeared almost straight. He flew the first tailless delta aircraft in 1931, followed by four improved designs.[4][5] None of these designs was easy to handle at low speed and none saw widespread service.[6][7]

During WWII Lippisch studied a more advanced tailless delta wing of greater angle intended for high-speed and even supersonic flight, for use in interceptor aircraft. One progressed as far as a glider prototype.[8]

The British later developed jet aircraft based on the data from Lippisch, notably the Avro Vulcan strategic bomber and the Gloster Javelin fighter. The Javelin incorporated a tailplane in order to rectify some of the perceived weaknesses of the pure delta, to improve low-speed handling and high-speed manoeuvrability and to allow a greater center of gravity range.[9]

Supersonic deltas

Aérospatiale-BAC Concorde during its last flight in 2003

In America Robert T. Jones, working at NACA during World War II, developed a theory for supersonic delta wings. First published in January 1945, this approach differed from Lippisch's earlier work on thick delta wings by combining a delta planform with a thin airfoil. This design proved to be superior and would form the basis of all practical supersonic deltas such as those first made by Convair.[10][11]

The tailless delta became a favored design for high-speed use, and was used almost to the exclusion of other designs by Convair and by Dassault Aviation in France, notably with the popular Dassault Mirage III. Convair's F-102 Delta Dagger was the first fighter with a tailless delta wing in service with any air force anywhere in the world.

The tailed delta configuration was again adopted by the TsAGI (Central Aero and Hydrodynamic Institute, Moscow), to take advantage of both high angle-of-attack flying capability and high speeds. It was used in the MiG-21 ("Fishbed") and Sukhoi Su-9/Su-11/15 fighters, built by the tens of thousands in several different communist countries.

Close-coupled canard delta

Through the 1960s Saab AB developed a close-coupled canard delta configuration, with a delta foreplane just in front of and above the main delta wing.[12] Patented in 1963, it first flew on the Viggen fighter in 1967. The close coupling modifies the airflow over the wing, most notably when flying at high angles of attack. In contrast to the classic tail-mounted elevators, the canards add to the total lift, enabling the execution of extreme maneuvers, improving low-speed handling and lowering the landing speed. This configuration has since become common on supersonic fighter aircraft.

Supersonic transport

When supersonic transport (SST) aircraft were developed, the tailless ogival delta wing was chosen for both the Anglo-French Concorde and the Soviet Tupolev Tu-144, the Tupolev first flying in 1968.

Design variations

Pure delta wings suffer from some undesirable characteristics, notably flow separation at high angles of attack (swept wings have similar problems), and high drag at low altitudes. This originally limited them primarily to high-speed, high-altitude interceptor roles. Since then the delta design has been modified in different ways to overcome some of these problems.

Canard delta – Many modern fighter aircraft, such as the JAS 39 Gripen, the Eurofighter Typhoon and the Dassault Rafale use a combination of canards and a delta wing.

Tailed delta – adds a conventional tailplane (with horizontal tail surfaces), to improve handling. Common on Soviet types such as the Mikoyan-Gurevich MiG-21.

Cropped delta – tip is cut off. This helps avoid tip drag at high angles of attack. Used for example in all three Eurocanards (cropped, tailless delta combined with a canard).

In another variant known variously as compound delta, double delta or cranked arrow, the inner part of the wing has a very high sweepback, while the outer part has less sweepback, to create the high-lift vortex in a more controlled fashion, reduce the drag and thereby allow landing at acceptably slow speed. This design can be seen on the Saab Draken fighter, the prototype F-16XL "Cranked Arrow" and in the High Speed Civil Transport study. The ogee delta (or ogival delta) used on the Anglo-French Concorde Mach 2 airliner is similar, but with a smooth 'ogee' curve joining the two parts rather than an angle.


Tailless delta

Tailed delta

Cropped delta

Compound delta

Cranked arrow

Ogival delta

Aerodynamics

General characteristics

The long root chord and short span of the delta wing make it structurally efficient. It can be built stronger, stiffer and at the same time lighter than a swept wing of equivalent lifting capability. Its long root chord also allows a deeper structure for a given aerofoil section, providing more internal volume for fuel and other storage. Because of its light, robust structure it is easy and relatively inexpensive to build – a substantial factor in the success of the MiG-21 and Mirage aircraft.

The tailless delta wing is not suited to high wing loadings and requires a large wing area for a given aircraft weight. The most efficient aerofoils are unstable in pitch and the tailless type must use a less efficient design and therefore a bigger wing. Techniques used include:

  • Using a less efficient aerofoil which is inherently stable, such as a symmetrical form with zero camber, or even reflex camber near the trailing edge,
  • Using the rear part of the wing as a lightly- or even negatively-loaded horizontal stabiliser:
    • Twisting the outer leading edge down to reduce the incidence of the wing tip, which is behind the main centre of lift. This also improves stall characteristics and can benefit supersonic cruise in other ways.
    • Moving the centre of mass forwards and trimming the elevator to exert a balancing downforce. In the extreme, this reduces the craft's ability to pitch its nose up for takeoff and landing.

Low-speed characteristics

Eurofighter Typhoon of the German Luftwaffe has a tailless delta wing configuration

At low speeds a delta wing requires a high angle of attack to maintain lift. A slender delta creates a characteristic vortex pattern over the upper surface which enhances lift. Some types with intermediate sweep have been given retractable "moustaches" or fixed leading-edge root extensions (LERX) to encourage vortex formation.

As the angle of attack increases, the leading edge of the wing generates a vortex which energizes the flow, giving the delta a very high stall angle. A normal wing built for high speed use is typically dangerous at low speeds, but in this regime the delta changes over to a mode of lift based on the vortex it generates.

The vortex lift comes at the cost of increased drag and powerful engines are needed to maintain flight.

Transonic and supersonic characteristics

Wind tunnel model of the Avro 720, a delta-winged aircraft, in The Science Museum's Blythe House store

With a large enough angle of rearward sweep, in the transonic to low supersonic speed range the wing's leading edge remains behind the shock wave boundary or shock cone created by the leading edge root.

This allows air below the leading edge to flow out, up and around it, then back inwards again in a conical flow pattern. The lift distribution and other aerodynamic characteristics are strongly influenced by this sideways flow.[13]

The rearward sweep angle lowers the airspeed normal to the leading edge of the wing, thereby allowing the aircraft to fly at high subsonic, transonic, or supersonic speed, while the over wing speed of the lifting air is kept to less than the speed of sound.

A characteristic of this flight regime is that drooping the leading edge within the cone increases lift but not drag.[14] Such conical leading edge droop was introduced on the production Convair F-102A Delta Dagger at the same time that the prototype design was reworked to include area-ruling. It also appeared on Convair's next two deltas, the F-106 Delta Dart and B-58 Hustler.[15]

At high supersonic speeds the shock cone from the leading edge root lies along the wing surface behind the leading edge. It is no longer possible for the sideways flow to occur and the aerodynamic characteristics change considerably.[13] It is in this flight regime that the waverider technique, as used on the North American XB-70 Valkyrie, becomes practicable.

The canard delta

A lifting-canard delta can offer a smaller shift in the center of lift with increasing Mach number compared to a conventional tail configuration.

An unloaded or free-floating canard can allow a safe recovery from a high angle of attack.

Depending on its design, a canard surface may increase or decrease longitudinal stability of the aircraft.[16][17]

A canard delta foreplane creates its own trailing vortex. If this vortex interferes with the vortex of the main delta wing, this can adversely affect the airflow over the wing and cause unwanted and even dangerous behaviour. In the close-coupled configuration, the canard vortex couples with the main vortex to enhance its benefits and maintain controlled airflow through a wide range of speeds and angles of attack. This allows both improved manoeuvrability and lower stalling speeds, but the presence of the foreplane can increase drag at supersonic speeds and hence reduce the aircraft's maximum speed.

The tailed delta

A conventional tail stabiliser allows the main wing to be optimised for lift and therefore to be smaller and more highly-loaded.

When used with a T-tail as in the Gloster Javelin the large delta wing could give rise to a "deep stall"; at high angles of attack the wing nullified airflow over the tail and made the aircraft uncontrollable.[18]

Notes

  1. ^
  2. ^ .
  3. ^ .
  4. ^
  5. ^ .
  6. ^
  7. ^
  8. ^ .
  9. ^ .
  10. ^ Von Karman, Aerodynamics: Selected Topics in the Light of their Historical Development, 1954
  11. ^ Richard Hallion, Lippisch, Gluhareff and Jones: The Emergence of the Delta Planform, Aerospace Historian, March 1979.
  12. ^ .
  13. ^ a b Mason, Chap. 10, Pages 9-12.
  14. ^ Boyd, Migotzky and Wetzel; "A Study of Conical Camber for Triangular and Sweptback Wings", Research Memorandum A55G19, NACA, 1955.[1]
  15. ^ Mason, Chap. 10, Page 16.
  16. ^ .
  17. ^ .
  18. ^ .

References

  • Mason W.H.; "Configuration Aerodynamics", AOE 4124, Virginia Tech. [2]
  • .

See also

External links

  • Analysis of air flow over delta wings
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.