World Library  
Flag as Inappropriate
Email this Article

Economy car

Article Id: WHEBN0000816396
Reproduction Date:

Title: Economy car  
Author: World Heritage Encyclopedia
Language: English
Subject: Citroën 2CV, WikiProject Automobiles/Templates/Timelines, Volkswagen Beetle, Volkswagen Golf Mk1, Volkswagen (timeline)
Collection: Car Classifications, Transport Economics
Publisher: World Heritage Encyclopedia

Economy car

An economy car is an automobile that is designed for low cost purchase and operation.[1] Typical economy cars are small, lightweight, and inexpensive to buy.[2] Economy car designers are forced by stringent design constraints to be inventive.[3] Many innovations in automobile design were originally developed for economy cars, such as the Ford Model T[4][5][6][7] and the Austin Mini.[3][7] Gordon Murray the Formula 1 and Mclaren F1 designer, said when designing his new Murray T.25 city car: “I would say that building a car to sell for six thousand pounds and designing that for a high volume production, where you have all the quality issues under control is a hundred times more difficult than designing a Mclaren F1, or even a racing car. It is certainly the biggest challenge I've ever had from a design point of view.”[8][9] The alternative approach other than innovating to build a low cost car, is build a stripped down no frills version of a conventional car.

The precise definition of what constitutes an economy car has varied with time and place, based on the conditions prevailing at the time, such as fuel prices, disposable income of buyers, and cultural mores. In any given decade, there has generally been some rough global consensus on what constituted the minimum necessary requirements for a highway-worthy car, constituting the most economical car possible. However, whether that consensus could be a commercial success in any given country depended on local culture. Thus in any given decade, every country has had a rough national consensus on what constituted the minimum necessary requirements for the least expensive car that wasn't undesirable, that is, that had some commercially attractive amount of market demand, making it a mainstream economy car. In many countries at various times, mainstream economy and maximum economy have been one and the same.

From its inception into the 1920s, the Ford Model T fulfilled both of these roles simultaneously in the U.S. and in many markets around the world. In Europe and Japan in the 1920s and 1930s, this was achieved by the much smaller Austin 7 and its competitors and derivatives, although it failed to be accepted on the U.S. market even in the middle of the depression. From the 1940s and into the 1960s, the Volkswagen Beetle played both roles throughout much of the world—in Germany and Latin America particularly—but it was let down by relatively high fuel consumption, such that British, French, Italian, and Japanese models, all with better fuel economy, could capture the maximum-economy position in their home countries (which was also mainstream there). Meanwhile, in the U.S., the Beetle and other imports could command the maximum-economy position, but the mainstream-economy position was commanded by cars that would seem more like mid-range or luxury models in some other markets. By the 1960s a new wave of front-wheel-drive cars with all independent suspension had been launched. By the 1970s the hatchback had become the standard body type for new economy car models. The Soviet bloc started selling poorly built, obsolescent or obsolete cars on the world market, at subsidised prices for hard foreign currency. Many of these cars were seen as the best value proposition, because they were generally larger cars, for the same price as small western models; in the case of the Lada they were let down by very poor fuel economy. In the mid-1980s, the Yugoslavian Zastava Koral (Yugo) (a rebodied 1971-83 Fiat 127), was sold as the cheapest new car on the U.S. market, South Korea's Hyundai models also sold well in the U.S., and have gone on to be successful around the world. Since the 1990s, the automotive industry has become extensively globalized, with all major manufacturers being multinational corporations using globally sourced raw materials and components, with a trend for moving assembly to the lowest labour cost countries. Today, every major manufacturer offers economy cars, including at least one truly small car that may fall into subclassifications such as subcompact car, supermini, B-segment; city car; microcar; and others. The U.S. market traditionally lagged behind other world markets in its adoption of truly small fuel efficient economy cars, but today it is catching up.

Features that in one decade were considered luxury items (for example, power steering, power (servo assisted) brakes, air conditioning, electric windows) would in later decades be viewed as appropriate as standard equipment even in economy models.


  • History 1
    • Pre-war 1.1
    • 1945–1970 1.2
    • 1970s–1990s 1.3
  • Economy cars today 2
  • List of economy cars 3
  • See also 4
  • References 5
  • Bibliography 6



1902 Oldsmobile Curved Dash runabout
Ford Model T used for giving tourist rides at Greenfield Village
Ford assembly line, 1913. The magneto assembly line was the first

The History of the automobile after many experimental models dating back at least a hundred years, started with the first production car - the 1886 Benz Tricycle. This began a period that was later known as the Brass era which is considered to be from 1890 to 1918 in the U.S.[10] In the UK this is split into the pre 1905 Veteran era and Edwardian era to 1918. The U.S. Veteran era is pre-1890.

In the 1890s and into the first decade of the twentieth century; the motorized vehicle was considered a replacement for the carriages of the rich, or simply a dangerous toy, that annoyed and inconvenienced the general public. The period children's book Wind in the Willows, pokes fun at early privileged motorists. The Automotive industry in France were the world leaders during this period. The Red Flag Act had obstructed automotive development in the UK until it was mostly repealed in 1896. The high wheeler was an early car body style virtually unique to the United States. It was typified by large-diameter slender wheels, frequently with solid tires, to provide ample ground clearance on the primitive roads in much of the country at the turn of the 20th century. For the same reason, it usually had a wider track than normal automobiles.

The first car to be marketed to the (well off but not rich) ordinary person and so the first 'economy car', was the 1901–1907 [11] It was inspired by the buckboard type horse and buggy, (used like a small two-seat pickup truck) popular in rural areas of the U.S. It had two seats, but was less versatile than the vehicle that inspired it. It was produced after a fire at the Oldsmobile plant, when the prototype was saved by a nightwatchman named Stebbins, (who later became the Mayor of Detroit), and was the only product available to the company to produce, to get back on their feet.[12]

Although cars were becoming more affordable before it was launched, the 1908–1927 Ford Model T is considered to be the first true economy car, because the very few previous vehicles at the bottom of the market were 'horseless carriages' rather than practical cars. The major manufacturers at the time had little interest in low-priced models. The first 'real' cars had featured the FR layout first used by the French car maker Panhard and so did the Model T.

Henry Ford declared at the launch of the vehicle -

"I will build a car for the great multitude. It will be large enough for the family, but small enough for the individual to run and care for. It will be constructed of the best materials, by the best men to be hired, after the simplest designs that modern engineering can devise. But it will be low in price that no man making a good salary will be unable to own one - and enjoy with his family the blessing of hours of pleasure in God's great open spaces."[13][14]

The [11] Black was the only colour available because it was the only paint that would dry in the required production time. The continuous improvement of production methods, and economies of scale from larger and larger scale production, allowed Henry Ford to progressively lower the price of the Model T throughout its production run. It was far less expensive, smaller, and more austere than its hand-built pre-first world war contemporaries. The size of the Model T was arrived at, by making its track to the width of the ruts in the unsurfaced rural American roads of the time, ruts made by horse-drawn vehicles. It was specifically designed with a large degree of axle articulation, and a high ground clearance, to deal with these conditions effectively. It had an under stressed 177 cu in (2.9 L) engine. It set the template for American vehicles being larger than comparable vehicles in other countries, which would later on have economy cars scaled to their narrower roads with smaller engines.

In 1912 Edward G. Budd founded the Budd Company, which initially specialized in the manufacture of pressed-steel frames for automobiles. This built on his railroad experience. In 1899 he had taken his knowledge of pressed steel to the railroad industry. He worked with the Pullman Company on a contract for Pennsylvania Railroad, building the first all-steel railcar.

In 1913 the 1018 cc "Bullnose" Morris Oxford (1913–14) was the first model launched by Morris Motors only 1302 were made. The 1915-1919 Morris Cowley (about 1400 produced) was a cheaper version of the Oxford. It was available as a two seater, or van but the chassis was too short to allow four-seat bodies to be fitted.[15] It made extensive use of bought in components, including many from the U.S. to reduce costs. The post–First World War Bullnoses and subsequent Oxfords/Cowleys would be much larger cars with bigger engines. From small beginnings, this company would in the 1920s found MG (Morris Garages) and after the Second World War merge with the Austin Motor Company to become the British Motor Corporation.

In 1913 the British Trojan company had its prototype ready for production. It had a two-stroke engine with four cylinders arranged in pairs, and each pair shared a common combustion chamber - a doubled-up version of what would later be called the "split-single" engine. The pistons in each pair drove the crankshaft together as they were coupled to it by a V-shaped connecting rod. For this arrangement to work, it is necessary for the connecting rod to flex slightly, which goes completely against normal practice. The claim was that each engine had only seven moving parts, four pistons, two connecting rods and a crankshaft. This was connected to a two-speed epicyclic gearbox, to simplify gear changing, and a chain to the rear wheels. Solid tyres were used, even though these were antiquated for car use, to prevent punctures and very long springs used to give some comfort. Before production could start war broke out and from 1914 to 1918, the company made tools and gauges for the war effort.

In 1914 Ford was producing half a million Model Ts a year, with a sale price of less than US$500. This was more than the rest of the U.S. auto industry combined and ten times the total national car production of 1908, the year of the cars launch. Also in that year Ford made headlines by increasing the minimum wage of his workers from $2.83 for a nine-hour day to $5.00 for an eight-hour day, to combat low workforce morale, and employee turnover problems because of the repetitive and stressful nature of working on the production line, and more radically, to turn his semi-skilled workers into potential customers.[16]

The Ford Model T was the first automobile produced in many countries at the same time. It was the first 'World Car', since they were being produced in Canada and in Manchester, England starting in 1911 and were later assembled in Germany, Argentina,[17] France, Spain, Denmark, Norway, Belgium, Brazil, Mexico, and Japan.[18]

At the New York Motor Show in January 1915, William C. Durant the head of Chevrolet (and founder of GM), launched the Chevrolet Four-Ninety, a stripped down version of the Series-H, to compete with Henry Ford's Model T, and went into production in June. To aim directly at Ford, Durant said the new car would be priced at US$490 (the source of its name), the same as the Model T touring. Its introductory price was US$550, however, although it was reduced to US$490 later when the electric starter and lights were made a US$60 option. Henry Ford responded by reducing the Model T to US$440.[19]

In 1916 Edward G. Budd's first big order for the Budd Company was from the Dodge brothers, who purchased 70,000 bodies, mounting the steel bodies onto conventional chassis frames. By the 1920s his pressed steel bodies were fast replacing traditional coachbuilt bodies all around the world. These were fully closed roofed bodies, until this time open tourer bodies were the standard body on the market. Budd envisioned pushing his technology even further, and in 1924 he found another visionary in André Citroën. By 1934, they had developed the Citroën Traction Avant, the first unibody, pressed-steel automobile. Budd also pioneered the use of electric arc welding in automobile manufacturing. It would be the 1930s before this technology was generally applied to economy cars.

The cyclecar was an attempt in the period before 1922 in the post-First World War austerity period, as a form of "four-wheeled motorcycle", with all the benefits of a motorcycle and side-car, in a more stable package.

Trojan Utility Car

In 1920 Trojan in Britain made its first series of six cars from a works in Croydon and the final revised production version was shown at the 1922 London Motor Show. An agreement was reached with Leyland Motors to produce the cars at their Kingston upon Thames factory where work on reconditioning ex RAF wartime trucks was running down. This arrangement would continue until 1928 when Leyland wanted factory space for truck production. During the nearly seven years of the agreement 11,000 cars and 6700 vans were made.[15] The car known as the Trojan Utility Car went onto the market at £230, reducing to £125 in 1925, the same as a Model T Ford.[20] Nothing was conventional. Rather than a chassis the car had a punt shaped tray which housed the engine and transmission below the seats. This is a similar idea to the chassis-less design of the contemporary 1922 Italian Lancia Lambda luxury car. The transmission used a chain to drive the solid tyre shod wheels. The 1527-cc engine to the ingenious Hounsfield design was started by pulling a lever on the right of the driver. To prove how economical the car was to run, the company ran the slogan "Can you afford to walk?" and calculated that over 200 miles (320 km) it would cost more in shoes and socks than to cover the distance by Trojan car.[15]

The astronomical success of the Model T accelerated after the First World War, and by the time Ford made his 10 millionth car, half of all cars in the world were Fords. It was so successful that Ford did not purchase any advertising between 1917 and 1923; more than 15 million Model Ts were manufactured, reaching a rate of 9,000 to 10,000 cars a day in 1925, or 2 million annually,[21][22][23] more than any other model of its day, at a price of just $240. The need for constant reductions in price through the 1920s reflected increasing competition from newer designs for the relatively unchanged and increasingly obsolescent Model T.

In 1923 Chevrolet developed a new car to compete with the Model T, the Chevrolet Series M 'Copper-Cooled', air-cooled car, designed by General Motors engineer at AC Delco Charles Kettering, (who invented the points/condenser ignition system that was in use until the 1980s). It was a rare failure for him, due to uneven cooling of the inline four-cylinder engine.[24][25]

Citroën Type A Torpedo 1919

The most development of small economy cars occurred in Europe. There was less emphasis on long-distance automobile travel, a need for vehicles that could navigate narrow streets and alleys in towns and cities (many were unchanged since medieval times), and the narrow and winding roads commonly found in the European countryside. Ettore Bugatti designed a small car for Peugeot. The 1911 Peugeot Bébé Type 19. It had an 850 cc 4-cylinder engine. The Citroën Type A was the first car produced by Citroën from June 1919 to December 1921 in Paris. Citroën had been established to produce the double bevel gears that its logo resembles, but had ended the First World War with large production facilities, from the production of much needed artillery shells for the French army. Andre Citroen was a keen adopter of U.S. car manufacturing ideas and technology in the 1920s and 1930s. Andre Citroen re-equipped his factory as a scaled down version of the Ford River Rouge Plant, that he had visited in Detroit Michigan. It was advertised as "Europe's first mass production car." The Type A reached a production number of 24,093 vehicles. The Opel 4 PS, Germany's first 'peoples car', popularly known as the Opel Laubfrosch (Opel Treefrog), was a small two-seater car introduced by the then family owned auto maker Opel, early in 1924, which bore an uncanny resemblance to the little Torpedo Citroën 5 CV of 1922.

On an even smaller scale, European cars, such as the 747 cc Austin Seven, (which made cyclecars obsolete overnight.[26][27]) The Austin 7 was considerably smaller than the Ford Model T. The wheelbase was only 1,905 millimetres (6 ft 3 in), and the track only 1,016 millimetres (40 in). Equally it was lighter - less than half the Ford's weight at 360 kilograms (794 lb). The engine required for adequate performance was therefore equally reduced and the 747 cubic centimetres (45.6 cu in) sidevalve was quite capable with a modest 7 kilowatts (10 bhp) output. It would also start to catch on in Japan during the same time period, as a Datsun Type 11 that may have been pirated, at the start of their own automobile industry. It was also produced as a BMW Dixi and BMW 3/15 in Germany, Rosengart in France with French styled bodywork, and by American Austin Car Company with American styling, (later American Bantam) in the U.S. It displaced the motorcycle and sidecar combination that was popular in Europe in the 1920s. It spawned a whole industry of 'specials' builders. Swallow Sidecars switched to making cars based on Austin Seven chassis during the 1920s, then made their own complete cars in the 1930s as SS. With the advent of Nazi Germany the company changed its name: to Jaguar. The Seven continued to be produced until the late 1930s along with an updated and restyled closed body, known as the "Big Seven" until World War II, but still on the early 1920s running gear, but with a slightly enlarged chassis and widened track.

Austin 7 Chummy Tourer 1929
Ford A Tudor Sedan, 1930

In the late-1920s, General Motors finally overtook Ford, as the U.S. new car market doubled in size, and fragmented into niches on a wave of prosperity, with GM producing a range of cars to match. This included a Chevrolet economy car that was just an entry level model for the range of cars. It was only a small part of the marketing strategy - "A car for every purse and purpose" of GM head Alfred P. Sloan. Harley Earl was appointed as head of the newly formed GM "Art and Color Section" in 1927.[28] Harley Earl and Alfred P. Sloan implemented planned obsolescence and the annual model change to emphasise design as an engine for the success of the company's products.[29] This moved cars from being utilitarian items to fashionable status symbols - that needed regular replacement "to keep up with the Joneses." Later in 1937, the Art and Color Section was renamed[30] the Styling Section, and a few years afterward became one of the GM technical staff operations as the Styling Staff.[31] It was funded by high interest/low regular payments consumer credit, as was the 1920s boom in other consumer durable products. It marked the beginning of mass market consumerism, that had been enabled by the efficiency of mass production and the moving production line. Until this time, manufacturers of consumer goods were concerned, by the possibility that the market would be fulfilled and demand would dry up. Henry Ford was wrong-footed by staying with the production oriented one size fits all, "any colour you like as long as it's black", Model T for far too long. The seller's market in new cars in the U.S. was over. Customers wanted choice. The 'one model' policy had nearly bankrupted the Ford Motor Company. By the end of production in 1927 it looked like a relic from another era. It was replaced by the Model A. The Ford Model T was voted Car of the Century on December 18, 1999 in Las Vegas, Nevada.[4][5][6][7]

In 1929 Chevrolet replaced the 171 cu in (2.8 L) straight-4 engine that dated from 1913, with the 194 cu in (3.2 L) straight-6 engine or "Stovebolt 6" that was to last until the 1970s as Chevrolet's base engine. A few years later Ford developed the Model 18 with the 221 cu in (3.6 L) flathead V8. The same car was available with a slightly reworked Model A engine, marketed until 1933 (in U.S.) as the Model B.[32] In Europe, it remained in the Ford lineup, as the Ford V8 in Britain in the 1930s which was re-styled and relaunched as the post-war Ford Pilot. They were viewed as large cars in Europe. The 1932 Ford V8 (Model 18) coupe became the car of choice for post-war hot rodders. It was the first V8 engine in a low priced car, and along with the Chevrolet 6, showed how the U.S. was diverging from the rest of the world in its ideas about what constituted a basic economy car.

In 1928 Morris launched the first Morris Minor (1928) in Britain to compete with the Austin Seven. Also that year German motorcycle manufacturer DKW launched their first car, the P15, a rear-wheel-drive, wood-and-fabric bodied monocoque car, powered by a 600 cc an inline two-cylinder two-stroke engine.

Also, in the 1920s, Ford (with the Model T in Manchester, England), General Motors (who took over Opel in Germany and Vauxhall in Britain), expanded into Europe. Most Ford and GM European cars, especially economy cars, were technologically conservative and all were rear-wheel-drive to a smaller European size, with improvements focused mainly on styling, (apart from the introduction of the 1935 monocoque Opel Olympia, and the Macpherson strut by Ford in the 1950s), until the late 1970s and early 1980s.

DKW F1 Saloon
Tatra V570 1933

In 1931 the



  1. ^ "Birth pangs at Detroit for a new economy car". Life 47 (11): 157–165. 1959-09-14. Retrieved 2011-11-19. 
  2. ^ Walton, Harry (August 1959). "How much do you actually save with a small car?". Popular Science 172 (2): 78–214. Retrieved 2011-11-19. 
  3. ^ a b c Strickland, Jonathan (2007-02-21). """HowStuffWorks "How the MINI Cooper Works. Retrieved 2014-03-25. 
  4. ^ a b Law, Alex (1999-12-22). "Car of the Century". Auto123. Retrieved 2006-04-29. 
  5. ^ a b Wright, Richard A. (1999-12-20). "Car of the Century? Ford's Model T, of course". Joyrides. Archived from the original on 2005-02-05. Retrieved 2014-03-25. 
  6. ^ a b "Car of the Century?". Wired. Reuters. 1999-12-17. Retrieved 2014-03-25. 
  7. ^ a b c d Cobb, James G. (1999-12-19). "This Just In: Model T Gets Award". The New York Times. Retrieved 2014-03-25. 
  8. ^ a b c How to go faster and influence people: The Gordon Murray F1 Story, BBC TV, 2012 
  9. ^ a b c Madslien, Jorn (2010-09-19). "F1 designer Gordon Murray unveils lightweight city car". Retrieved 2013-01-31. 
  10. ^ "The Brass Car Era - 1890 to 1919". Retrieved 2013-04-26. 
  11. ^ a b  
  12. ^ Wright, Richard A. (2000-03-08). "Born in fire -- the curved-dash Olds". The Detroit News. Retrieved 2013-01-31. 
  13. ^ Robert Lacey. Ford: The Men and the Machine.  
  14. ^ Reynolds, David. America, Empire of Liberty: A New History.  
  15. ^ a b c  
  16. ^ "Henry Ford Changes the World, 1908". Retrieved 2013-01-31. 
  17. ^ "History of Ford Motors Argentina". 2014-03-25. Archived from the original on 2007-08-09. 
  18. ^ "Celebrating the Ford Model T, only 100 years young!". Auto Atlantic. Retrieved 2014-03-25. 
  19. ^ Vance, Bill (2004-05-31). "Motoring Memories » Motoring Memories: Chevrolet Four-Ninety". Autos Canada. Retrieved 2014-03-25. 
  20. ^ Baldwin, N. (1994). A-Z of Cars of the 1920s. Devon, UK: Bay View Books.  
  21. ^ Sandler, Martin (2003). Driving Around the USA: Automobiles in American Life. Oxford University Press. p. 21. 
  22. ^ Brinkley, Douglas (2003). Wheels for the world: Henry Ford, his company, and a century of progress, 1903–2003. Viking. p. 475. 
  23. ^ Sorensen, Charles E.; Lewis, David Lanier; Williamson, Samuel T. My forty years with Ford. Wayne State University Press. p. 4. 
  24. ^ Vance, Bill (2001-03-02). "Motoring Memories: "Copper Cooled" Chevrolet". Autos Canada. Retrieved 2014-03-25. 
  25. ^ Auto Editors of Consumer Guide (2007-08-04). "1923 Chevrolet Series M Copper-Cooled". Retrieved 2010-04-17. 
  26. ^ "1937 Austin Seven Nippy Images, Information and History". Retrieved 2010-07-20. 
  27. ^ David Miller (2003-09-26). "Woodie Gallery: Cyclecars". Old Woodies. Retrieved 2010-07-20. 
  28. ^ Cambridge, MIT Press (1995), 200-212 Design History: An Anthology".
  29. ^ Richard A. Wright, 1996.First 100 Years of the Auto Industry in the U.S.".
  30. ^ Yanek Mieczkowski (2002-12-09). "Just Who Was Harley Earl?". Retrieved 2012-04-06. 
  31. ^ Sloan 1964, pp. 264–278, Chapter 15, "Styling".
  32. ^ Standard Catalogue of American Cars 1805–1942, 2nd Edition, editors Beverly Rae Kimes and Henry Austin Clark, jr., Krause Publications, Iola WI 54990 (1985), ISBN 0-87341-111-0; p. 566f
  33. ^ "Front Wheel Drive". Retrieved 2012-04-06. 
  34. ^ Peter Bowler, president The BSAFWD Club. "vehicle history". Retrieved 2012-04-06. 
  35. ^ by the Auto Editors of Consumer Guide (2007-10-23). """HowStuffWorks "1929-1931 Cord L-29. Retrieved 2012-04-06. 
  36. ^ "Eine Seite "Maikäfer"", Motor-Kritik, issue 21, early November 1931.
  37. ^ "The road that led to the beetle". Retrieved 2013-09-10. 
  38. ^ "Der Fall Ganz: Wie der VW Käfer wirklich entstand", Technology Review (German edition), November 2005. [1]
  39. ^ Hitler - A Profile ZDF 1995
  40. ^ "The True Story of the BEETLE". 1933-04-23. Retrieved 2012-04-06. 
  41. ^ Posted by the Big Dog Garage Team on March 30, 2007 2:49 PM (2007-03-30). "1937 Fiat Topolino". Retrieved 2013-01-31. 
  42. ^ "Prototype Cooper". 1946-10-25. Retrieved 2013-01-31. 
  43. ^ "1952 Fiat 500 Images, Information and History (Topolino, Cinqucento, 500C, Belvedere)". Retrieved 2013-01-31. 
  44. ^ Setright, L. J. K. "FIAT: The Godfather of the Italian Motor Industry" in Northey, Tom, editor. World of Automobiles (London: Orbis Publishing Ltd, 1974), Volume 6, p.660.
  45. ^ Setright, p.659.
  46. ^ Setright, p.660.
  47. ^ Auto Editors of Consumer Guide. "Introduction to 1951–1956 Ford Consul and Zephyr". Retrieved 2010-07-20. 
  48. ^ "SIA Flashback – The Truth About Chevy's Cashiered Cadet at Hemmings Blog – Classic and collectible cars and parts". 2008-04-06. Retrieved 2010-07-20. 
  49. ^ Niedermeyer, Paul (2011-07-26). "The Radically Advanced But Aborted 1947 Chevy Cadet: GM’s First Deadly Sin?". Curbside Classic. Retrieved 2013-01-01. 
  50. ^ Saunders, David (2012-11-22). "Storage Field Classic: Ford Zephyr Mark 1 – Ford Builds The Chevrolet Cadet". Curbside Classic. Retrieved 2013-01-01. 
  51. ^ a b c Bellu, René (2003). "Automobilia". Toutes les voitures françaises 1940 - 46 (les années sans salon) (in French) (Histoire & collection) 26: 63. 
  52. ^ Fernand Picard and Charles-Edmond Serre persisted nevertheless.
  53. ^ Picard, Fernand (1976). L'épopée de Renault. Éditions Albin Michel. p. 288.  
  54. ^ Borgé, Jacques; Viasnoff, Nicolas (1977). Renault, l’Empire de Billancourt. EPA.  
  55. ^ "1957 Renault 4CV Saloon - Auction Lot". Motorbase. 2006-05-20. Retrieved 2013-01-01. 
  56. ^ a b Bellu, René (2001). "Automobilia". Toutes les voitures françaises 1948 (salon Paris oct 1947) (in French) (Histoire & collections) 7: 66. 
  57. ^ Simoneit, Ferdinand, ed. (1977-06-22). "Erinnern Sie sich? Volkswagen auf französisch: Der Renault 4CV". Auto, Motor und Sport (in German) 13: 58–60. 
  58. ^ "VW Media Services". 2008-09-16. Retrieved 2012-04-06. 
  59. ^ "Ivan Hirst". Retrieved 2012-04-06. 
  60. ^ "Ivan Hirst". The Guardian (London). 2000-03-18. 
  61. ^
  62. ^ "Jap Cars Shown (Very Early Toyotas) | Modern Mechanix". 2006-09-28. Retrieved 2012-04-06. 
  63. ^ a b Norbye, Jan P. (1991). Autos Made in Japan. Bleicher Verlag.  
  64. ^ Ruiz, Marco (1986). The Complete History of the Japanese Car. Portland House.  
  65. ^ "Toyota seit 1936", Joachim Kuch, Stuttgart: Motorbuch Verlag, Artikelnummer 17060
  66. ^ "Fifty Years of Toyota Concept Cars", in "the wheel extended", vol 17, no.3, 1987, Toyota Motor Corporation, ISSN 0049-755X
  67. ^ Nunn, Peter (2005). "Minicars: Cheap and Cheerful" (Jan–Feb). Japan Automobile Manufacturers Association. 
  68. ^ "Die Historie von Renault". Retrieved 2012-04-06. 
  69. ^ Lewin, Tony; Borroff, Ryan; Callum, Ian (2010). How to Design Cars Like a Pro. Motorbooks. p. 185. 
  70. ^ Copping, Richard (2006). VW Golf: Five Generations of Fun: The Full Story of the Volkswagen Golf. Veloce Publishing. p. 17. 
  71. ^ "Austin American fan site". Retrieved 2013-01-01. 
  72. ^ "1970 Austin America". Serious Wheels. Retrieved 2014-03-26. 
  73. ^ Smith, Maurice A., ed. (1968-03-21). "Austin America: Automatic [BMC] 1300 tailored exclusively to US requirements". Autocar 3762 (128): 24–25. 
  74. ^ "1966: Future of Monte Carlo rally in doubt". BBC News. 1966-01-21. Retrieved 2010-05-01. 
  75. ^ Holloway, Hilton; Buckley, Martin (2002). 20th Century Cars. Carlton.  
  76. ^ "Registro Autobianchi". Retrieved 2009-07-12. 
  77. ^ Koch, Jeff (January 2010). "Renault 5/Le CarIt was fun while it lasted". Hemmings Sports & Exotic Car. Retrieved 2012-07-24. 
  78. ^ Peter Garnier (ed) (1974-06-22). "News: Ford's two millionth Escort". Autocar 141 (4053): 28. 
  79. ^ "Chevrolet Corvair Technical Specifications and Data". Retrieved 2009-05-04. 
  80. ^ "1964 Volkswagen 1200 'Beetle' Technical specifications". Retrieved 2009-05-04. 
  81. ^
  82. ^ a b Adams, Keith. "Hillman Imp cars (also Sunbeam Stilleto, Singer Chamois, Husky Estate, Asp, and Commer Imp Van)". Retrieved 2014-03-26. 
  83. ^ "Five rear-engined classic cars". 2013-03-10. Retrieved 2014-03-26. 
  84. ^
  85. ^ Auto Editors of Consumer Guide (2007-10-17). "1970–1978 AMC Gremlin". Retrieved 2012-05-15. 
  86. ^ Vance, Bill (2004-07-19). "AMC Gremlin, 1970–1978". Autos Canada. Retrieved 2012-05-15. 
  87. ^ Sagert, Kelly Boye (2007). The 1970s (American Popular Culture Through History). Greenwood International. p. 213.  
  88. ^ "Dishonorable Mention: The 10 Most Embarrassing Award Winners in Automotive History". Car and Driver. 2009-01. Retrieved 2013-01-16. 
  89. ^ "The H-Body Organization - Monza, Vega, Astre, Sunbird, Starfire, Skylark". Retrieved 2009-04-25. 
  90. ^ Motor Trend - August 1973. 15 Cars to own in a Gas Crisis
  91. ^ Motor Trend-April 1975. "The Ten Best Selling (American-made) Cars in the Country"
  92. ^ "Tagged: 10 cars with bad reputations". Retrieved 2009-04-25. 
  93. ^ 1976 Chevrolet Vega brochure.
  94. ^ 1973-77 Pontiac Astre Canadian and U.S brochures
  95. ^ 1978-79 Chevrolet Monza brochures
  96. ^ The editors of Consumer Guide
  97. ^ "1971 Ford Pinto". The 50 worst cars of all time list. 2007-09-07. Retrieved 2009-02-26. 
  98. ^ "Honda : Automotive Industry Factsheet". Retrieved 2009-07-09. 
  99. ^ a b Niedermeyer, Paul (2009-11-24). "Curbside Classic: Five Revolutionary Cars – No. 1 – 1973-1979 Honda Civic". The Truth About Cars. Retrieved 2014-03-26. 
  100. ^ "Chevrolet Chevette". Chevrolet Chevette. Retrieved 2009-02-26. 
  101. ^ Nicalek, Bryan T. "The Dodge Omni and Plymouth Horizon". Retrieved 2014-03-26. 
  102. ^ "Plymouth Horizon cars". 1977-12-07. Retrieved 2012-04-06. 
  103. ^ a b Bouwkamp, Burt. "Creating the Chrysler Horizon: the Chrysler Europe Design Team speaks". Retrieved 2014-03-26. 
  104. ^ "Volkswagen Golf GLS". Retrieved 2013-01-31. 
  105. ^ "Volkswagen Golf GTI Mk. 1". Retrieved 2013-01-31. 
  106. ^ Edwardes-Evans, Luke (2007-07-01). "Used cars -Volkswagen's Mk1 Golf GTi". Auto Express. Retrieved 2013-01-31. 
  107. ^ Eveleigh, Ian (November 2010). "Volkswagen Golf GTI Mk1:". Retrieved 2013-01-31. 
  108. ^ "Volkswagen Golf GLD". Retrieved 2013-01-31. 
  109. ^ "The Fiat pages". Retrieved 2013-01-31. 
  110. ^ "Fiat Uno 60S". The Automobile Association. May 1990. Retrieved 2013-01-31. 
  111. ^ "Uno | Italdesign Giugiaro". Retrieved 2012-04-06. 
  112. ^ "Fiat Uno (1983-1989)". Retrieved 2013-01-31. 
  113. ^ "Previous_Cars". Archived from the original on 2007-05-23. Retrieved 2007-07-29. 
  114. ^ "The 250,000-Mile Engine". The Case for Diesel: Clean, Efficient, Fast Cars (Hybrids Beware!). 
  115. ^ "BBC Top Gear Season 15 Episode 2 - Launch of the Fiat Cinquecento". BBC Top Gear. 1992. BBC 2.
  116. ^ "BBC Top Gear - Comparison Fiat Cinquecento Sporting and Rover Mini Cooper". BBC Top Gear. 1995-03-30. BBC 2.
  117. ^ "Renault Twingo 1 (1992): design history". Car Body Design. Retrieved 2012-04-06. 
  118. ^ "Citroën S9 - AX prototypes - Citroënet". Retrieved 2012-03-02. 
  119. ^ "The phut-phut Fiesta". Autocar & Motor. 1992-07-08. Retrieved 2014-05-07. 
  120. ^ "The phut-phut Fiesta". Autocar & Motor. 1992-07-08. Retrieved 2014-05-07. 
  121. ^ "The phut-phut Fiesta". Autocar & Motor. 1992-07-08. Retrieved 2014-05-07. 
  122. ^ "The phut-phut Fiesta". Autocar & Motor. 1992-07-08. Retrieved 2014-05-07. 
  123. ^ Abuelsamid, Sam (2007-09-12). "Frankfurt 2007: Toyota iQ concept details and Pics". Retrieved 2009-04-20. 
  124. ^ "Little Diesels". AutoSpeed. Retrieved 2012-04-06. 
  125. ^ "VW Golf Bluemotion 1.6 TDI (2010) CAR review | Road Testing Reviews | Car Magazine Online". 2010-02-01. Retrieved 2012-04-06. 
  126. ^ "Volkswagen Polo (1982)". Retrieved 2012-04-06. 
  127. ^ Fordham, John (1994-09-11). "MOTORING / Auto Biography / The Volkswagen Golf CL Ecomatic IN 0-60 Seconds". The Independent (London). 
  128. ^ Bell, Roger (1994-02-05). "Motoring / Road Test: A car that goes with the flow: Roger Bell takes an ecological trip in the VW Ecomatic, which is coasting into first place as the most environmentally friendly car". The Independent (London). 
  129. ^ "The Golf Ecomatic Page". Retrieved 2012-04-06. 
  130. ^ "Turbo'd for Fuel Economy". AutoSpeed. Retrieved 2012-04-06. 
  131. ^ "The Confidence Trick". AutoSpeed. Retrieved 2012-04-06. 
  132. ^ "Fiat 500 TwinAir | First Drives | Car Reviews". Auto Express. Retrieved 2012-04-06. 
  133. ^ "MultiAir Technology!". AutoSpeed. Retrieved 2012-04-06. 
  134. ^ "Euro NCAP Five Star Models - Renault & Safety - About Renault - Renault UK". Retrieved 2012-04-06. 
  135. ^ , 2007-11-23India Times"Tata Motors seeks patent protection for Rs 1 lakh car", . Retrieved 2010-04-17.
  136. ^ "India’s Auto Industry to be a Global leader by 2012". 2008-08-18. Retrieved 2013-01-31. 
  137. ^ "The Renault-Nissan Alliance Inaugurates Plant In Chennai, India". 17 March 2010. Retrieved 2010-10-25. 
  138. ^ "Nissan Relocates Supermini Car Production to India". Asia Briefing. 2009-08-28. Retrieved 2010-10-25. 
  139. ^ "T.25 - USP's & Key Features". Retrieved 2013-01-31. 
  140. ^ Knight, Matthew (2010-06-29). "Former F1 engineer unveils new city car". CNN. Retrieved 2010-06-29. 
  141. ^ Madslien, Jorn (2010-09-19). "F1 designer Gordon Murray unveils lightweight city car". BBC News. Retrieved 2010-09-19. 
  142. ^ Tisshaw, Mark (2013-08-13). "Murray T25 and T27 confirmed for production". Autocar. Retrieved 2014-09-15. 


See also

Note: This list includes vehicles which were/are regarded as economy cars in the era and country of their introduction. They may not necessarily be regarded as economical today compared to modern cars.

List of economy cars

Gordon Murray the Formula 1 and Mclaren F1 designer, said when designing his new Murray T.25 city car: "I discovered why people didn't make what they call 'Sub A' segment cars, small city cars – you don't make any money on them. Because the tooling and development cost for a small car is almost the same as for a bigger car. So people would rather build larger cars and make more profit. That's when I started thinking, that if this is going to work there needs to be a new way of making the cars, that is cost effective. That high capital pressed components using low labour cost countries a long distance from developed world markets has a large environmental cost. Car manufacturers say that production emissions are small compared to tailpipe emissions, but in fact they are a very significant proportion of total emissions. We need to re-think the Henry Ford design of mass production." Murray's solution is a laser cut tubular steel space-frame chassis built with an automated tube mill, braced with bonded low cost composite sheets that would be a cheaper and greener means of production. Murray's 'iStream' simplifies each process with an eighty percent smaller factory with lower cost production, making light weight efficient cars. There are no sheet metal presses, spot welders or paint plants. It would be built local to its market. Murray is currently negotiating production licences.[8][9][139][140] [141] The T25 and T27 are expected to be available in 2016.[142]

India is becoming a global outsourcing production centre for small cars.[136] The Suzuki Alto and Hyundai i10 are already being exported to Europe from India. In March 2010 at Chennai, the Renault-Nissan Alliance opened a US$990 million plant to produce 400,000 units per year at full production. The first vehicle to be produced at the plant will be the new Nissan Micra, for the Indian market as well as for export to over 100 countries in Europe, the Middle East and Africa. Production of the Micra has been re-located from the UK and other developed countries. In 2011, the plant will start production of the Renault Koleos and Fluence, for the Indian market based on the same platform.[137][138]

China has become one of the fastest growing car markets, recently overtaking the U.S. as the largest producer of cars in the world. It is followed by India with a preference towards inexpensive, basic cars, but they are both moving upmarket in their tastes as their economic rise continues.

The narrow profit margins of economy cars can cause financial instability for their manufacturers. Historically, Volkswagen in the 1970s and Ford in the 1920s almost collapsed because of their one model economy car business strategy. Ford was saved by the Model A and Volkswagen was saved by the Golf. Ford started the Mercury and Lincoln brands to diversify its product range. VW moved away from the narrow profit margins of economy cars, by expanding its range so that now it spans from very small city cars like the Volkswagen Up to Audis and Bentleys, and it also owns SEAT and Skoda.

Some mainstream European auto makers have developed models specifically for developing countries, such as the Fiat Palio, Volkswagen Gol and Dacia Logan. Renault has teamed up with India's Mahindra and Mahindra to produce a low-cost car in the range of US$2,500 to US$3,000. The Tata Nano launched in January 2008, in India by Tata Motors, may mark the beginning of the return of so-called "people's cars" because of its low announced price - claimed by Tata as the world's cheapest car at US$2,500. The Nano, like the 1950s Fiat 500, has a rear engine and was styled by Italians. It is designed to get whole families off scooters and onto four wheels. Tata has also announced plans to export their Tata Indica that was formerly sold in Europe as the City Rover.

Gordon Murray Design T.25

The growth of developing countries has also created a new market for inexpensive new cars. Unlike in the postwar period this demand has not been met by utilitarian but advanced 'peoples cars'. Adaptation of standard or obsolete models from the first world has been the norm. Production of car models superseded in first-world markets is often moved to cost-sensitive markets like South Africa and Brazil; the Citi Golf is an example.

A crucial difference between the North American car market and the markets of Europe and Japan is the price of fuel. Fuel is heavily taxed and therefore relatively costly in most first-world markets outside North America; fuel is about two and a half times the price in the UK than the U.S. Fuel costs are also a much higher proportion of income, due to generally higher wages and lower living costs in the U.S. Only during occasional fuel price spikes such as those of 1973, 1979–81, and 2008-9 have North American drivers been motivated to seek levels of fuel economy considered ordinary outside North America.

As an alternative to manual synchromesh gearboxes, automatic continuously variable transmission (CVT) gearboxes are optional on some economy cars, such as Audi, Honda, and the MINI ONE and MINI Cooper. Tata Motors from India, recently announced that it too would use a variomatic transmission in its US$2,500 Nano.[135] CVT application to economy cars was pioneered by Fiat, Ford, and Van Doorne in the 1980s. Rather than the pulled rubber drive belts as used in the past by DAF, the modern transmission is made much more durable by the use of electronic control and steel link belts pushed by their pulleys.

The conflicting design goals for economy cars — small size with maximum usable interior space; low cost and light weight with acceptable safety performance, light cars have a higher ratio of unsprung suspension mass to sprung mass which affects ride quality, and the need for light materials with acceptable durability, continue to stimulate innovative development. Technology improvements such as electronic engine management, adoption of four valves per cylinder, variable valve timing, direct injection of petrol/Gasoline and diesel, hybrid power, and smoother, more powerful diesel engines with very high pressure electronic injection, have dramatically improved fuel economy and performance.[124] The latest technologies to improve efficiency are engine downsizing and automatic engine stop-start. Automatic engine stop-start systems like VWs BlueMotion,[125] shut the engine down when the car is stopped to reduce idling emissions and boost economy, and it is now mandatory not to idle unnecessarily in cities in Germany. It is an updated version of the 1980s VW 'Formel E' system that was developed into the 1990s VW 'Ecomatic' system.[126][127][128][129] Also extremely important, is the application of turbo-charging to down-sized engines in order to turn its efficiency benefits into fuel economy / emission benefits instead of for performance.[130][131] The recent Fiat 'Multiair' system, is an electro-hydraulic development of variable valve timing that allows the engine management computer to control valve timing, improving engine efficiency, giving better torque, power, economy, and emissions.[132][133] Safety design is a particular challenge in a small, lightweight car. This is an area where Renault has been particularly successful.[134] Sport compacts and Hot hatches have developed into a their own competitive genre, although their economy has been compromised, these models offer higher performance because of the lightness of the platforms that they are based upon.

A development in recent years in Europe, has been the launch of small MPVs/people carriers. This is a development of the Fiat Uno. The niche first emerged in Japan with the 1993 Suzuki Wagon R Keicar class car. This was sold by GM in Europe from 2000 as the Vauxhall/Opel Agila. This was followed by the slightly larger supermini based cars like the Renault Modus, Citroën C3 Picasso, Fiat Idea, Nissan Note, and the Vauxhall/Opel Meriva that is also produced in Brazil. Their tall packaging designs offer the interior space of a larger car. The higher seating increases visibility for the driver that is useful in urban driving. They also make it easier to get in and out, which is useful for those with personal mobility problems, such as the elderly and the disabled.

The City car market in Europe from the 1990s has seen increased competition, with the market split between standard and 'designer' city cars that are sold for a premium. These cars are at the lower end of supermini size or smaller. Standard city cars include the Toyota Yaris, Citroën C1/Peugeot 107/Toyota Aygo (built in the same factory), Fiat Panda, Kia Picanto, Chevrolet Matiz, Volkswagen Fox, Mitsubishi Colt, Volkswagen Lupo, and 2011 Volkswagen Up. The 'designer' city car became increasingly popular in Europe in the 1990s. The first car of this kind was a limited success, the 1985 Lancia Y10, because it had been hampered by its poor ride, from being based on the original utilitarian Fiat Panda. Also, Lancia was a dying brand in the UK at this time. The 1993 Renault Twingo and Ford Ka in 1996, marked an upsurge in sales for this niche. The Ka was to be launched along with the mid-1990s Fiesta with the innovative Australian two stroke Orbital engine,[119] [120] [121] [122] but tightening emissions laws meant that it was launched with an updated Ford Kent engine instead. This was followed by the innovative engineering designs; Mercedes-Benz A-Class with an under floor engine, the two seater rear engined Smart ForTwo, and the aluminium bodied Audi A2. Sales really took off with the 2001 BMW Mini with its modern but conventional front wheel drive engineering and re-interpretation of the classic Austin Mini styling. This has sold well in other markets including North America. Other cars of this type include the Mitsubishi Colt based Smart Forfour, VW Polo based Audi A1, Fiat Panda based Fiat Nuova 500, Citroën C3 based Citroën DS3 and Fiat Grande Punto based Alfa Romeo MiTo. The Toyota iQ, designed in France,[123] went on sale in January 2009 in the UK. It is a competitor for the Smart ForTwo but with occasional rear seats. It follows the Issigonis philosophy of packaging, with innovations including a flat under floor fuel tank and specially located steering rack and final drive unit to maximise floor space for passengers. It seats four adults in a car 2.985 m (117.5 in)long, 1.680 m (66.1 in) wide, and 1.5 m (59.1 in) tall, and achieves 65.69 mpg-imp (4.300 L/100 km; 54.70 mpg-US) with a 99g/km CO2 rating. It also achieved the top Euro NCAP 5/5 stars safety rating.

Today economy cars have specialised into market niches. The small city car, the inexpensive-to-run but not necessarily very small general economy car, and the performance derivatives that capitalise on light weight of the cars on which they are based. Some models that started as economy cars such as the Volkswagen Golf and Toyota Corolla, have increased in size and moved upmarket over several generations, and their makers have added smaller new models in their original market niches. The 2003 Volkswagen Golf Mk5 had put on so much weight, that some models weigh the same as a Volvo 200 Series. The supermini 2002 Volkswagen Polo Mk4 was longer and wider than the 1970s Volkswagen Golf Mk1. Gordon Murray the Formula 1 and Mclaren F1 designer, said when designing his new Murray T.25 city car: “Today with all the promises of hydrogen and hybrids and electric cars, if you could take ten percent out of the weight of every car, the effect in the next ten years would be more than that of all the hybrids and electric cars on the planet.”[8][9]

Alfa Romeo MiTo
Audi A2 1999-2005
Mercedes A-Class W168
Fiat Panda 2005
Citroën C1
Toyota iQ production version
1966 and 2007 Fiat 500. The new 500 is larger, safer and more fuel efficient than the original.

Economy cars today

In 1993, Fiat launched the conservatively styled but very well packaged front wheel drive Fiat Cinquecento that could accommodate four adults. It eventually replaced the first Fiat Panda and also the aged rear engined rear wheel drive 1970s Fiat 126, as the smallest car in the Fiat range.[115][116] But the real breakthrough in small car design was the 1993 Renault Twingo which was a revolution in styling by being the first 'one box' small car to reach production.[117] (The early pre-production Citroën AX supermini launched in 1987 was a 'monobox' design, but the production version was much more conservative after negative reactions in focus groups.)[118] Both had the interior space of a much larger car. The Twingo and Cinquecento relaunched the city car market in Europe, for decades the only competitors in this market were the Austin Mini and the Polish built Fiat 126, that had been developed from the 1950s Fiat 500.

Also in 1983 Peugeot launched the Pininfarina-styled Peugeot 205. While not as radical as the Uno in body design, it was also very aerodynamic. It was the first European supermini with a diesel engine - the XUD. It provided performance of a 1.4 L petrol with economy—55 miles per imperial gallon (5.1 L/100 km; 46 mpg-US)—that was better than the base 1 L petrol version. It could, like most diesel engines, last for several hundred thousand miles with regular servicing.[114] It was, along with the larger (also XUD powered) Citroën BX, the beginning of the start of the boom in diesel sales in Europe. The 205 GTI was as popular as the Golf GTI in Europe. The 205 was named "Car of the Decade" in the UK, by CAR magazine in 1990.

In 1983 Fiat launched the next step forward in small car design, the [113]

In 1982 GM launched their first front-wheel-drive small economy car, the Opel Corsa/Vauxhall Nova in Europe. Their first European market front-wheel-drive car, the Vauxhall Astra/Opel Kadett D, Golf-sized car was introduced in 1979.

Peugeot 205
1990-95 Fiat Uno Cd 0.30

In 1980, Fiat introduced the Giugiaro designed Mk 1 Fiat Panda. It was originally designed to be produced in China at its 1970s level of industrialisation. It was a utilitarian front-wheel-drive supermini with Fiat standard transverse engine and end-on gearbox. It featured mostly flat body panels and flat glass. Also in 1980, the third generation Ford Escort was launched changing to front wheel drive from rear wheel drive.

Technologies that developed during the post-war era, such as disc brakes, overhead-cam engines and Fiat 128 and 1972 Honda Civic. Some previously exotic technology, electronic fuel injection, became affordable, which allowed the production of high-performance hot hatch sport compacts like the 1976 Volkswagen Golf GTI.[105] This car combined economy of use and a practical hatchback body, with the performance and driving fun that kicked off the hot hatchback boom.[106][107] Also introduced in 1976, was the 1.5 L VW Golf diesel—the first small diesel hatchback.[108] It used new Bosch rotary mechanical diesel injection pump technology. Also in that year, Ford of Europe (produced by the merging of Ford national operations in Europe) launched their first front-wheel-drive small car, the Ford Fiesta, having gained experience from the Ford of Germany 1960s European mid sized Ford Taunus P4 and Ford of Brazil Ford Corcel.

Volkswagen Golf 1976 Mk1 (Australia)

Captive imports were the other response by U.S. car makers to the increase in popularity of imported economy cars in the 1970s and 1980s. These were cars bought from overseas subsidiaries or from companies in which they held a significant shareholding. GM, Ford, and Chrysler sold imports for the U.S. market. The Buick Opel, Ford Cortina, Mercury Capri, Ford Festiva, and Dodge Colt are examples.

Chevrolet offered three new small economy cars in the 1980s to replace the Chevette: the Chevrolet Sprint, a three-cylinder Suzuki-built hatchback, The Chevrolet Spectrum built by Isuzu and the Chevrolet Nova built by NUMMI in California, a GM-Toyota joint venture. Chevrolet offered the Geo brand in the 1990s featuring the Suzuki-built Geo Metro (marketed as the Suzuki Swift in Europe, Suzuki Cultus in Japan, and Holden Barina in Australia), the Isuzu-built Storm, and the NUMMI-built Prizm.

Chrysler having taken control of Simca (and Hillman in the UK) in the 1960s, as part of expansion plans to match GM and Ford, turned to their French subsidiary, when they needed to launch an American made sub-compact, to comply with federal Corporate Average Fuel Economy (CAFE) regulations that were being introduced starting with the 1978 model year cars. The replacement for the Simca 1100, the C2 project, became the (Simca) Talbot Horizon that won European Car of the Year 1978, and was a success with more than 3 million sold in the United States, where it sold as the Dodge Omni and Plymouth Horizon from 1978 to 1990.[101][102] It had been re-engineered with a federal emission VW Golf 1.7L engine and MacPherson strut suspension for the U.S. market.[103] Chrysler Europe was sold to Peugeot in 1978, due to mounting operating losses in Europe and the U.S. that required a U.S. government bailout.[103]

The Chevrolet Chevette was introduced in September 1975 and produced through to 1987. It was a successful and 'Americanized' design from experienced, (but technologically conservative) Opel, GM's German subsidiary. The Auto Editors of Consumer Guide said, "In its dozen years on the market, Chevette had earned a reputation for being a simple, straightforward car offering high fuel economy and steadfast reliability. It left in its wake a sea of happy owners, and many no doubt mourned its passing."[100] Ford followed suit with an American first generation version of the all new hatchback and front wheel drive 1980 Ford Escort Mark III (Europe).

By 1970, Nissan released their first front-wheel-drive car that was originally developed by Prince Motor Company which had merged with Nissan in 1966. This was introduced in 1970 as the Datsun/Nissan Cherry. In 1973, the Energy Crisis started, which made small fuel efficient cars more desirable, and the North American driver began exchanging their large cars for the smaller, imported compacts that cost less to fill up and were inexpensive to maintain. The Toyota Corona, the Datsun 510, the Mitsubishi Galant (a captive import from Chrysler sold as the Dodge Colt), the Subaru DL, and later the Honda Accord gave buyers increased passenger space and some luxury amenities, such as air conditioning, power steering, AM-FM radios, and even power windows and central locking without increasing the price of the vehicle. In 1972, the Honda Civic was launched, the CVCC (Compound Vortex Controlled Combustion) Stratified charge engine engine debuted in 1975 and was offered alongside the standard Civic engine. The CVCC engine had a head design that promoted cleaner, more efficient combustion, eliminating the need to use a Catalytic converter for the new California emission standards - nearly every other U.S. market car for that year needed exhausts with catalytic converters.[98][99] The Japanese, who had previously competed on price, equipment and reliability with conservative designs, were starting to make advanced, globally competitive cars.[99]

1976-77 Honda Civic Hatchback
Nissan Cherry

The Ford Pinto was introduced one day after the Vega. It was small, economical, and a top seller. However, it was proven to have design and safety issues. The Pinto made Time magazine's 'The 50 worst cars of all time list' - not because it was a particularly bad car, but because it had a rather volatile nature. The car tended to erupt in flames in rear-end collisions. The Pinto is at the end of one of autodom's most notorious paper trails—several Ford company memos presented as evidence during the civil trials revealed that these remedies were discussed, with the conclusion that to shut down production and retool would be too expensive. Most damaging to Ford were memos found and published by author-researcher Mark Dowie in the magazine Mother Jones that detailed a cost analysis of corporate liability in the event of having to compensate crash victims.[96] The "Ford Pinto memo" ruthlessly calculated the cost of reinforcing the rear end ($121 million) versus the potential payout to victims (US$50 million).[97] The Ford Pinto engine though was successful in European Fords for twenty years, in successive mid and large European sized mainstay models of the; UK Ford Cortina, German Ford Taunus, the Ford Sierra, and the Ford Granada amongst others.

Pontiac's lowest-priced car was a re-badged Vega variant exclusively available in Canada for the 1973-'74 model years, and introduced in the U.S. the following year. The final 1977 models featured the first use of Pontiac's Iron Duke inline-4 engine.[94] Lower priced versions of the Chevrolet Monza were introduced for 1978 and rebadged variants of the discontinued Vega were also added to the Monza line - the Monza wagon using the Vega Kammback body was sold for the 1978-79 model years, and the Monza S hatchback, a price leader model using the Vega Hatchback body, was also offered for the 1978 model year.[95]

The Chevrolet Vega, introduced in September 1970, was GM's first subcompact, economy car. It had attractive scaled down Chevrolet Camaro derived styling.[88] Nearly two million were sold over its seven-year production run,[89] due in part to its low price and fuel economy.[90] By 1974, the Vega was among the top 10 best-selling American-made cars,[91] but the aluminum-block engine developed a questionable reputation.[92] Chevrolet increased the engine warranty to 50,000 miles (80,000 km) to all Vega owners, which proved costly for Chevrolet. The 1976 Vega had extensive engine and body durability improvements and a five-year/60,000 mi (97,000 km) engine warranty.[93] After a three-year sales decline, the Vega and its aluminium engine were discontinued at the end of the 1977 model year.

AMC was determined to have the first subcompact offering and 1970 AMC Gremlin sales began six months ahead of the all-new 1971 models from GM and Ford.[85][86] The Gremlin used the AMC Hornet's existing design with a shortened wheelbase and "chopped" tail, and had an important low-price advantage.[87]

The 1973 oil crisis (and again in 1979), emphasised the importance of fuel economy worldwide, as an increasing proportion of the cost of vehicle operation. This had particular impact in the United States with its greater distances, which was arguably the nation hardest hit because of the prevalence of large, fuel-thirsty cars. At the same time, new emissions and safety regulations were being implemented requiring major and costly changes to vehicle design and construction for the U.S. market. The sales of imported economy cars had continued to rise from the 1960s. The first response by domestic American car makers included the U.S. produced, FR layout cars, the AMC Gremlin, Chevrolet Vega, and Ford Pinto, along with captive imports.

1977 Chevrolet Chevette Hatchback
1971 AMC Gremlin X
1972 Ford Pinto Sedan
1973 Chevrolet Vega GT Hatchback


1960s launched RR layout cars:

The 1960s also saw the swan song of the rear-engined rear-wheel-drive car RR layout. The first models designed with this layout in Central Europe before the second world war, had better traction than any other two wheel drive car layout. They were very capable in the mountainous country there, that had lots of unsurfaced roads, just how capable was shown by the performance of the two wheel drive military Kübelwagen version of the VW Beetle.[81] This layout also had better interior space utilisation than front engine rear-wheel-drive cars, and a better ride than those with a live rear beam axle. It was an affordable way to produce a car with all round independent suspension, without the need for expensive constant-velocity joints needed by front-wheel-drive cars, or axle arrangements of FR layout cars. They could have road-holding issues due to unfavorable weight distribution and wheel camber changes (rear wheel tuck under), of the lower-cost swing axle rear suspension design. These were highlighted and a little exaggerated by Ralph Nader. These problems were ameliorated on later Beetles and were eliminated on the second-generation Chevrolet Corvair with the switch to a four-link, fully independent rear suspension. The Hillman Imp, NSU Prinz and Soviet Zaporozhets all had styling cues derived from the original Corvair.[82][83][84] Connections to the Corvair are mentioned on their respective Wikipages. The only economy cars with this layout launched since the 1960s have been the turn of the millennium ultra compact two seater city car Smart Fortwo and Indian market Tata Nano.

In the U.S. market, in 1959 Studebaker launched the Studebaker Lark, then 1960 brought the Chevrolet Corvair, Ford Falcon, and Plymouth Valiant into the market segment dominated by Rambler. These vehicles were lower priced and offered better fuel economy than the standard domestic full-size models, that had grown in size and price through the 1950s. The Corvair, Chevrolet's rear-engined compact car, was originally brought to market to compete directly with the VW Beetle. Ford Falcon and Plymouth Valiant were conventional, compact six-cylinder sedans that competed directly with the Rambler American. In 1962 Chevrolet introduced the Chevy II line of conventional compacts first offered with 4- and six-cylinder engines. These American vehicles were still much larger than fuel-efficient economy cars popular in Europe and Japan. The Corvair is twenty inches longer, seven inches wider, eight hundred pounds heavier and includes an engine almost twice the size of the Beetle that inspired it.[79][80] Corvair offered VW's rear engine advantages of traction, light steering, and flat floor with Chevrolet's six-passenger room and six-cylinder power American buyers were accustomed to. Later versions of the Corvair were considered sports cars rather than 'economy' cars including Monza Spyder models, which featured one of the first production car turbocharged engines. The Corvair Monza was followed by the Falcon based Ford Mustang, introduced in 1964, establishing the "pony car" class which included Corvair's replacement, the Chevrolet Camaro in 1967, expanding the domestic pony car market segment started in mid-1960s.

Chevy II 4 Door Sedan
1960 Plymouth Valiant Sedan
1960 Ford Falcon
1960 Chevrolet Corvair
1959 Studebaker Lark

In 1968 Ford replaced the outmoded Anglia with the Ford Escort which was sold across Western Europe. It was longer and wider than its predecessor to fill the gap left by increasing the size of Ford's next model up in the range the Ford Cortina. It had the same mechanical layout and suspension as the Cortina and Anglia, but with contemporary 'Coke Bottle' styling. It struggled to compete with the larger and more comfortable Opel Kadett in West Germany. It had a squarer flatter panel body re-style in 1974. Ford had sold 2 million Escorts across Europe by 1974.[78] The most successful market was the UK. The Escort's success was greatly helped by its numerous rallying successes in the 1970s, and the performance versions like the Escort Mexico and RS2000 that traded on that success, and provided a halo effect for the lesser models.

The Simca 1100 was also the first small car, that was designed from the outset, with an angled single piece hatchback tailgate to enter large scale production. The earlier Renault 4 tailgate was near vertical like an estate car, and the Austin A40 originally had a split tailgate. The Simca was successful in France, but less so elsewhere due to 'tappety' engines and body corrosion. A total of 2.2 million cars were produced by 1985. In 1972 Renault introduced the monocoque Renault 5 supermini hatchback, that used the proven and successful Renault 4 mechanicals and suspension. It was made until 1985, when it was replaced by the 'Super Cinq'. American Motors (AMC) marketed a version with sealed-beam headlamps and reinforced bumpers as the 'Le Car' in the U.S. from 1976 to 1983.[77]

In 1964 Fiat under the engineering leadership of Dante Giacosa designed the first car with a transverse engine and an end on gearbox (using different length drive shafts) and a hatchback - the Autobianchi Primula,[76] It had Pininfarina styling that bore a resemblance to the Austin 1100. It was put into limited production by Fiat under their Autobianchi brand. Fiat still produced the FR layout 1100 of about the same size, so that any potential technical teething problems would not damage their brand. Primula production ceased in 1970, by which time 74,858 had been built. It was replaced by the Autobianchi A112 and Autobianchi A111 with the same mechanical layout. They were only sold in mainland Europe, where they were popular into the 1980s (replaced by the Lancia Y10), but unknown in the UK. The French 1967 Simca 1100 (who had previously used Fiat technology under licence), the 1969 Fiat 128, and the 1971 Fiat 127 regarded as the first 'super-mini' brought this development to a wider audience. The 128 was Dante Giacosa's final project. This layout gradually superseded the gearbox in the engine's sump of BMC Austin Morris and later Peugeot PSA X engine, until the only car in production with this transmission layout by the 1990s, was the then long obsolescent Austin (Rover) Mini.

In 1962 Fiat introduced the third generation FR layout Fiat 1100, called the 1100D. It was restyled into the 1100R from 1966. The Fiat 1100D was made in India from 1964 onwards. In 1973 (for that model year alone) it was named the Premier President. From 1974 onwards until it was finally discontinued in 2000, it was known as the Premier Padmini.

Simca 1100 Hatchback
1970 Fiat 128
Autobianchi Primula

In the 1960s the Japanese MITI "national car" class of vehicles, saw the launch of the Isuzu Bellett, Daihatsu Compagno and Mazda Familia in 1963, the Mitsubishi Colt in 1965, and the Nissan Sunny, Subaru 1000, and Toyota Corolla in 1966. Honda introduced their first four-door sedan in 1969, called the Honda 1300. In North America, these cars were classified as subcompact cars. The 1960s Toyota Corolla, Datsun Sunny refined the conventional small rear-wheel-drive economy cars were widely exported from Japan as postwar international competition and trade increased. Japan also instituted the "Shaken" road-worthiness testing regime, that required progressively more expensive maintenance, involving the replacement of entire vehicle systems, that was unnecessary for safety, year on year, to devalue older cars and promote new cars on their home market that were available for low prices. There are very few cars in Japan more than five years old.

In the 1960s the semi-monocoque/platform chassis 750 cc Renault 4 (arguably the first small five-door hatchback, but viewed as a small estate car or station wagon at the time) was launched in France. It had a very soft but well controlled ride like the Citroën 2CV. In layout, it was essentially an economy car version of the 1930s designed Citroen Traction Avant, in particular the 'Commerciale' derivative, but with fully independent rear suspension (the Commerciale used a flexible beam axle, similar to 1970s VW twist-beam rear suspension). The Commerciale had been smaller than an estate car with a horizontally split two-piece rear door before the second world war. When it was relaunched in 1954 it featured a one-piece top-hinged tailgate. Citroen responded with the 2CV-based 1960 602 cc Citroën Ami and hatchback 1967 Citroën Dyane. Also in France, in 1966 Renault launched the midrange Renault 16 - although it was not an economy car, it is widely recognised as the first non-commercial mass-market hatchback car. The hatchback was a leap forward in practicality. It was adopted as a standard feature on most European cars, with saloons declining in popularity apart from at the top of the market over the next twenty years. Small economy cars that were more limited in load carrying ability than larger cars benefited most - long light loads like furniture could be hung out of the back of the car.

Also in 1959 the FR layout DAF 600, with a rear-mounted automatic gearbox, was launched in the Netherlands. The 600 was the first car to have a continuously variable transmission (CVT) system – the innovotive DAF Variomatic.[75] It was the first European economy car with an automatic gearbox. The CVT was continued through the 1960s and 1970s by DAF with the DAF Daffodil, DAF 33, DAF 44, DAF 46, DAF 66, and later by Volvo after they merged with the Volvo 340. The 1960s Austin Mini/Austin 1100 compact and innovative automatic gearbox, developed by Automotive Products (with a conventional epicyclic / torque converter coupling) was much less efficient at transmitting drive.

1966 Datsun/Nissan Sunny
1968 Renault 4
1959 DAF 600

The launch in the 1960s of the Mini Cooper to exploit the exceptional grip and handling of the Austin Mini, along with its success in rallying, (Monte Carlo Rally in particular[74]) and circuit racing, first showed that economy cars could be effective sports cars. It made traditional sports cars like the MG Midget look very old fashioned. The rear-wheel-drive Ford Lotus Cortina and Ford Escort 1300GT and RS1600, along with the Vauxhall Viva GT and Brabham SL/90 HB in the late 1960s opened up this market still further in Britain. Meanwhile, from the 1950s Abarth tuned Fiats and Gordini tuned Renaults did the same in Italy and France.

Ford in the UK in 1959 launched the Anglia 105E. It had a new overhead valve engine and a four speed gearbox, which was a great improvement over the previous model Anglia 100E that had a side-valve engine and only three speeds. It was rear wheel drive using a rear beam axle and leaf springs, with front Macpherson struts used like its predecessor. It used lots of miniaturised late 1950s American-influenced styling, including a sweeping nose line, and on deluxe versions, a full-width slanted chrome grille in between prominent "eye" headlamps, the car also sported a backward-slanted rear window and tailfins. This dated the car over its nine year production life. The Anglia's Ford Kent engine was in production in a developed form into the 21st Century.

The next major advance in small car design was the 1959 848 cc FF layout Austin Mini from the British Motor Corporation, designed by Alec Issigonis as a response to the first oil crisis, the 1956 Suez Crisis, and the boom in bubble cars and Microcars that followed. It was the first front-wheel-drive car with a water-cooled in-line four-cylinder engine mounted transversely - the BMC A-Series engine. This allowed eighty percent of the floor plan for the use of passengers and luggage. The majority of modern cars use this configuration. Its progressive rate rubber sprung independent suspension (Hydrolastic 1964–1971), low centre of gravity, and wheel at each corner with radial tyres, increased the car's grip and handling over all but the most expensive automobiles on the market. The Mini was voted the second most important car of the 20th century after the Ford Model T.[3][7] Badge engineered luxury versions with modified bodywork and wood and leather interiors were made under the names of Riley Elf and Wolesely Hornet. Customised versions were made by coach-builders like Harold Radford, and were very popular with the rich and famous of 1960s London. From 1964 a Jeep like version (that had been rejected by British Armed Forces), of the Mini, the Mini Moke was popular with the King's Road / Carnaby Street, Swinging London set. An Estate car / station-wagon (with a non-structural wood frame 'Countryman' version), a Van and Pick-up versions were also successful. In 1962, a slightly larger 1098cc (and later 1256cc) version of the Mini engineering design was launched, as the Austin/Morris 1100. It had front disc brakes as standard. It had Italian styling by Pininfarina and used front-to-rear interconnected independent Hydrolastic suspension. It was available in sporting MG versions, and luxury wood and leather interior Riley, Wolesely and Vanden Plas versions. It was for most of the 1960s, the top selling car in Britain, and was sold until the mid-1970s. It was sold as the Austin America in the U.S., Canada, and Switzerland between 1968 and 1972.[71][72][73] It was also sold in South Africa - Austin Apache and Spain - Austin Victoria, with Triumph type Michelotti re-styling, built in local factories. BMC had hedged their bets after the launch of the front wheel drive Mini and 1100 and to meet the demands of more conservative customers, by keeping their rear wheel drive Austin A40 Farina in production until 1967 and Morris Minor until 1971, while front wheel drive was being accepted by the UK and European markets. Demand from older customers in particular kept the Minor in production, despite it being very outdated.

The world's first hatchback,[69][70] the 1958 FR layout Austin A40 Farina Countryman model that was a co-development of BMC and the Italian design house Pininfarina at a time when this was unusual. It had a lift up rear window and drop down boot lid. It was also sold as a two door saloon. It was built in Italy by Innocenti as well as in the UK. For 1965 Innocenti designed a new single-piece rear door for their Combinata version of the Countryman. This top-hinged door used struts to hold it up over a wide cargo opening and was a true hatchback – a model never developed in the home (United Kingdom) market. The Countryman name has 'estate' type associations, and BMC successor company Rover used the name on estate cars / Station Wagons so it is largely forgotten.

1965 Monte Carlo Rally winner: 1964 Morris Mini Cooper S
BMC Austin-Morris Mini cross section shows how packaging maximizes passenger space
Austin A40 Farina MkII Countryman tail

Car body corrosion was a particular problem from the 1950s to the 1980s when cars moved to monocoque or uni-body construction (starting from the 1930s), from a separate Body-on-frame chassis made from thick steel. This relied on the shaped body panels and box sections, like sills/rockers, providing the integrity of the body-shell rather than a separate frame (vehicle) for strength. A light car was a fast and/or economical car. The introduction of newly available computers for structural analysis from the 1960s, with computers like the IBM 360, the thickness of sheet metal in bodyshells was reduced to the minimum needed for structural integrity. However, corrosion prevention / rustproofing, that had not previously been significant because of the thickness of metal and separate chassis, had not kept pace with this new construction technology. The lightest monocoque economy cars would be the most affected by structural corrosion.

In 1957, Fiat in Italy launched the 479 cc 'Nuovo' Fiat 500 designed by Dante Giacosa. It was the first real city car. It had a rear-mounted air-cooled vertical twin engine, and all round independent suspension. Its target market was Italian scooter riders who had settled down and had a young family, and needed their first car. Fiat had also launched the larger 1955 Fiat 600 with a similar layout but with a water-cooled in-line four-cylinder engine, it even had a six-seater people carrier / MPV / mini-van version called the 'Multipla', even though it was about the same size as a modern supermini.

In the late 1950s the DDR German Democratic Republic produced its 'peoples car'. The Trabant sold 3 million vehicles in thirty years due to its communist captive market. It had a transverse two-cylinder air-cooled two-stroke engine and front-wheel drive, using DKW technology.

In 1955, the Japanese Ministry of International Trade and Industry set a goal to all Japanese makers to create what was called a "national car" that was larger than the kei car. This influenced Japanese automobile manufacturers to focus their product development efforts for the smaller kei cars, or the larger "national cars". The concept stipulated that the vehicle be able to maintain a maximum speed over 100 km/h (62 mph), weigh below 400 kg (882 lbs), fuel consumption at 30 km/L (85 mpg-imp; 71 mpg-US) or more, at an average speed of 60 km/h (37 mph) on a level road, and not require maintenance or significant service for at least 100,000 km (62,000 mi). This established a "compact car" class, that is by far the most popular in Japan due to tax benefits stipulated by Japanese government regulations. One of the first compact cars that met those requirements was the FR layout Toyota Publica with a flat-2 engine, and the RR layout Mitsubishi 500. The Publica and the Mitsubishi 500 were essentially "kei cars" with engines larger than regulations permitted at the time.

While economy cars flourished in Europe and later Japan, the booming postwar American economy combined with the emergence of the suburban and interstate highways in that country led to slow acceptance of small cars. Brief economic recessions saw interest in economical cars wax and wane. During this time, the American auto manufacturers would introduce smaller cars of their own, in 1950 Nash Motors introduced the Nash Rambler designed to be smaller than contemporary cars, yet still accommodate five passengers comfortably establishing the American sized 'Compact car'. Nash also contracted with British Motor Corporation to build the American designed Metropolitan using existing BMC mechanical components, (the 1.5 Liter engine is a BMC B-Series engine also used in larger sizes in the MG MGA and MG MGB). Imported cars began to appear on the U.S. market during this time to satisfy the demands for true economy cars. An initial late 1940s–early 1950s success in a small way, was the monocoque Morris Minor launched in 1948, with its miniaturized Chevrolet styling. It was underpowered for the long distance roads of the U.S. and especially the freeways that were starting to spread across the country in the 1950s. The first British Motorway did not open until 1959. BMC preferred to develop the higher profit margin MGs for the American market and also worked with Nash and so passed on the opportunity. From the mid-1950s the Volkswagen Beetle using clever and innovative advertising and capitalising on its very high build quality, durability and reliability, was a spectacular success. Having been designed for cruising the autobahns, freeways were no problem for it. It disproved the scepticism of American buyers as to the usefulness of, by their standards, such small cars. Initially the stylish Renault Dauphine derived from the Renault 4CV, looked like it would follow the VWs footsteps, but then was a failure due to mechanical breakdowns and body corrosion. This failure on the U.S. market in the late 1950s, may have harmed the acceptance of small cars generally in America.[68]

1958 Subaru 360
Restored original Fiat 500 in a street race in Sicily, Italy
Nash Metropolitan
1951 Nash Rambler 2-door hardtop

In 1953, in Japan Hino entered the private car market, by manufacturing the Renault 4CV under licence. Also, in 1953 the Fiat 1100 in Italy was completely redesigned as a compact four-door sedan, with a modern monocoque bodywork and integrated front lights.

In the post war austerity of the late 1940s, when most of the Japanese population could not afford a car, but could afford a motorcycle, the Japanese codified a legal standard for extremely economical small cars, known as the keicar. The aim was to promote the growth of the car industry, as well as to offer an alternative delivery method to small business and shop owners.[67] Originally limited to a mere 150 cc (100 cc for two-strokes) in 1949, dimensions and engine size limitations were gradually increased (in 1950, 1951, and 1955) to tempt more manufacturers to produce kei cars. It wasn't until the 1955 change to 360 cc as the upper limit for two-strokes as well as four-strokes that the class really began taking off, with cars from Suzuki Suzulight (front-wheel drive based on the German Lloyd with a DKW type engine) and then Subaru 360, finally able to fill people's need for basic transportation without being too severely compromised. Early generation keicars on the market were mostly rear-engined, rear drive RR layout cars. From the end of the 1960s Keicars switched to front-engined, front-wheel-drive FF layout. This market has thrived ever since, with the cars increasing in size and engine capacity, including sports cars such as the Honda Beat and Suzuki Cappuccino, and even miniaturised MPVs.

The 1947 FR layout Toyota SA was Toyota's first true post war design.[62] Although permission to begin full production of passenger cars in Japan was not granted until 1949, limited numbers of cars were permitted to be built from 1947, and the Toyota SA was one such car.[63][64][65] It had a 4-cylinder engine, 4-wheel independent suspension and a smaller, aerodynamic body. The project was driven by Kiichiro Toyoda, but most of the design work was done by Kazuo Kumabe.[66] The two-door body was aerodynamic in a style similar to the Volkswagen Beetle. The doors were hinged at the rear (often called suicide doors). The front window was a single pane of flat glass with a single wiper mounted above the driver. Only right hand drive was offered. Toyota engineers (including Dr Kumabe) had visited Germany before World War II and had studied Porsche and Volkswagen designs (independent suspension, aerodynamic bodies, backbone chassis, rear-mounted air-cooled engines, economical production cost).[63] Many Japanese companies had ties with Germany during the war years. But unlike other Japanese car firms Toyota did not partner with Western companies after the war, so it was free to use German designs. Many features of the prototype Beetle were subsequently put into the SA, although the Beetle's rear-mounted air-cooled engine feature was not used. Later on, Toyota revisited the economic principles exemplified by the Beetle when designing the 1950s successors to the SA and the later Publica and Corolla.

1947 Toyota Toyopet Model SA
1953 Morris Minor

Also in the immediate postwar period, the monocoque FR layout Morris Minor was launched in 1948. To reduce costs it initially reused the pre-war side-valve 918 cubic centimetres (56.0 cu in) Morris 8 engine instead of an intended flat-four. Later, after the 1952 formation of British Motor Corporation it had the Austin designed 948cc and later 1098cc OHV BMC A-Series engine. It had a strong emphasis on good packaging and roadholding, with independent front suspension and rack and pinion steering, and American influenced styling. It was produced in different body styles including a 2-door and 4-door saloon, a 2-door convertible, a 'woody' estate car / station wagon, a van with a rear box and a pick-up truck. 1.3 million had been built by the end of production in 1971. It was designed by Alec Issigonis.

The Saab 92 had a transversely mounted, water-cooled two-cylinder, two-stroke based on a DKW design, driving the front wheels. It had aircraft derived monocoque construction, with an aerodynamic (drag coefficient) value of 0.30 – not bettered until the 1980s. It was later developed into the Saab 93, Saab 95, and Saab 96. It was produced until 1980, switching to a V4 four stroke engine in the 1960s. The mechanicals were used in the Saab Sonett sports cars.

The 375 cc Citroën 2CV had interconnected all round fully independent suspension, rack and pinion steering, radial tyres and front-wheel drive with an air-cooled flat twin engine and four-speed gearbox. It was some 10 to 15 MPG (Imperial) more fuel efficient than any other economy car of its time – but with restricted performance to match. It was designed to motorise rural communities where speed was not a requirement. The original design brief had been issued before the Second World War in the mid-1930s. It had been completely redesigned three times, as its market and materials costs had changed drastically during its development period. Engine size increased over time; from 1970 it was a still tiny 602 cc. It was in production until 1990.

The VW featured a 1.1-litre, air-cooled flat four, rear engine with rear-wheel drive, all round fully independent suspension, semi monocoque construction and the ability to cruise on the autobahn for long periods reliably. This cruising ability and engine durability was gained by high top gearing, and by restricting the engine breathing and performance to well below its maximum capability. Production was restarted after the war by the British Army Royal Electrical and Mechanical Engineers, under Major Ivan Hirst after it was dismissed as valueless for war reparations by the Western Allies. In 1948 Hirst recruited Heinrich Nordhoff to run Volkswagen GmbH and in 1949 ownership was handed over to the West German government.[58][59][60][61] The Volkswagen Type 1 'Beetle' was to became the most popular single design in history. Its production surpassed The Ford Model T on February 17, 1972. It was withdrawn from the European market in 1978.

The 4CV was designed covertly by [54] Lefaucheux was a man with contacts, as soon as the 4CV project meetings had taken place, Porsche was arrested in connection with war crimes allegations involving the use of forced labour including French in the Volkswagen plant in Germany. Ferdinand Porsche, despite never facing any sort of trial, spent the next twenty months in a Dijon jail. The 760 cc rear-mounted four-cylinder engine, three-speed manual transmission 4CV was launched at the 1946 Paris Motor Show and went on sale a year later.[55] Volume production with the help of Marshall Plan aid money, was said to have commenced at the company's Parisian Boulogne-Billancourt plant a few weeks before the Paris Motor Show of October 1947, although the cars were in very short supply for the next year or so.[56][56] On the 4CV's launch, it was nicknamed "La motte de beurre" (the lump of butter); this was due to the combination of its shape and the use of surplus paint from the German Army vehicles of Rommel's Afrika Korps, which were a sand-yellow color.[57]

As Europe and Japan rebuilt from the war, their growing economies led to a steady increase in demand for cheap cars to 'motorise the masses'. Emerging technology allowed economy cars to become more sophisticated. Early post-war economy cars like the VW Beetle, Citroën 2CV, Renault 4CV, and Saab 92 looked extremely minimal; however, they were technologically more advanced than most conventional cars of the time.

SAAB 92 1949
First generation "Ripple Bonnet" Citroën 2CV built 1949–1960
Ford Anglia 101E

In anticipation of a repeat of the post First World War economic recession, GM started the "Chevrolet Cadet" project (a compact car intended to sell for less than US$1,000), that ran from 1945 to 1947, to extend the Chevrolet range downwards in the U.S. new car market. Chevrolet head of engineering Earle S. MacPherson was in charge of development. It had a unibody structure, an over-square over head valve engine, a strut-type front suspension, small-diameter road wheels, a three-speed gearbox, brake and clutch pedals suspended from the bulkhead rather than floor-mounted, and integrated fender/body styling. It was light and technically advanced, but GM's management cancelled it, stating that it was not economically viable. The anticipated post Second World War U.S. car market recession hadn't materialised. The MacPherson strut, probably the world's most common form of independent suspension, evolved in the GM Cadet project by combining long tubular shock absorbers with external coil springs, and locating them in tall towers that directed the vertical travel of the wheels and also formed the "king pin" or "swivel pin axis" around which the front wheels could turn. It was elegantly simple, with just three links holding the wheel in place - the strut itself, the single-piece transverse lower arm, and the anti-roll bar that doubled as a drag link for the wheel hub. MacPherson took his ideas to Ford instead. They were first used in the French 1948 Ford Vedette. Next in the 1950 British Ford Consul and Zephyr (British mid-size cars, the same size as the Cadet), which owed more to the Cadet than just the MacPherson strut suspension, and caused a sensation when they were launched. In 1953, a miniaturised economy car version, the Anglia 100E was launched in Britain.[47][48][49][50]

1948 Crosley Station Wagon


Crosley, a U.S. appliance manufacturer, from 1939 (switching to war production in 1942-45) to 1952, produced small economy cars of a European rather than American scale. These featured a variety of innovative in-house designed engines of less than one litre capacity. They were popular in the 1940s due to their high fuel economy during fuel rationing because of the war. There were a wide variety of two-door body styles; Sedan, Convertible Sedan, Coupe, Convertible Coupe, Covered Wagon, and Station Wagon. Also, there was a successful sports car, the Crosley Hotshot. The styling of 1951 Crosley Super Sport is very similar to the 1958 Frogeye/Bugeye Austin-Healey Sprite. Production peaked at 24,871 cars in 1948. Sales began to slip in 1949, as the post war American economy took off, and even adding the Crosley Hotshot and a combination farm tractor-Jeep-like vehicle called the Farm-O-Road in 1950, could not stop the decline. In 1952, only 1522 Crosley vehicles were sold. Production was shut down and the plant was sold to the General Tire and Rubber Company.

The pre-war European car market was not one market. Trade barriers fragmented it into national markets, apart from luxury cars where the extra cost of tariffs could actually make cars more exclusive and desirable. The only way for a car maker to enter another national market of a major European car making country, (and their colonial markets of the time), was to open factories there. For example, Citroen and Renault opened factories in England in this period. This situation only really changed with the post-war growth of the EEC (European Community) and EFTA. The British RAC (Royal Automobile Club) horsepower taxation system had the secondary function of excluding foreign vehicles. It was specifically targeted at the Ford Model T, which the then government feared would wipe out the fledgling indigenous motor industry. It crippled car engine design in Britain in the inter-war period, causing British car makers to produce under-square, low revving, long stroke engines. It was abolished after World War II as part of the British export drive for desperately needed, hard foreign currency, because it made British cars uncompetitive internationally. The technologically conservative 1930s Morris Eight, Ford Eight (Ford Model Y which was related to the German Ford Köln), and Standard Eight (Standard, later became Triumph) were named after their RAC horsepower car tax rating.

Ford 8 / Ford Model Y 933cc 1937
Morris 8 1936

The Steyr 50 streamlined small car was introduced in 1936 by the Austrian manufacturer Steyr. The car had a water-cooled four-cylinder boxer engine driving the rear wheels through a four-speed transmission. It had a similar engine and radiator layout as the Fiat Topolino that was launched at about the same time. To save room and weight a dynastarter was used, which doubled as the axle of the radiator fan. It was regarded as the "Austrian Peoples' Car" and was affectionately referred to as the Steyr "Baby". Professor Porsche had, despite rumors, not been involved in the design or production of the 50. Moreover, the little Steyr offered better seating and luggage space than Porsche's Volkswagen with shorter overall length, a large sheet metal sliding roof and was available with hydraulic brakes (instead of the early Volkswagens' cable-operated ones). In early 1938, the car was revised. It got a more powerful engine and a longer wheelbase. The new model was called the Steyr 55 and went on sale in 1940. A total of 13,000 Steyr "Babies" were sold. The production of Steyr cars was discontinued during World War II, after bombing of the factory. After the war, the factory was rebuilt and specialized in Austrian versions of the Fiat 500 and Fiat 1500. Today the Steyr factory produces the BMW X models for Europe.

The Fiat 1100 was first introduced in 1937 as an updated version of the 508 "Balilla" (its real name was the 508C) with a look similar to the 1936 Fiat 500 "Topolino" and the larger 1500, with the typical late-thirties heart-shaped front grille, with styling by the emerging designer, Dante Giacosa.[44] It was powered by a 1,089 cc four cylinder overhead-valve engine. Drive was to the rear wheels through a four-speed gearbox, and for the period, its comfort, handling, and performance were prodigious,[45] making it "the only people's car that was also a driver's car".[46]

From 1936 to 1955, Fiat in Italy produced the advanced and very compact FR layout Fiat 500 "Topolino" or "little mouse", the precursor of the 1950s Fiat 500, it was designed by Dante Giacosa. The inline four cylinder 569 cc 13 12 hp engine was placed right at the front of the chassis with the radiator behind it. This allowed for a sloping front and good legroom when combined with lowered seating. This also allowed Fiat to lower the roofline.[41] Although nominally a two seater more were often squeezed in behind the seats. Initially it had quarter elliptic leaf spring rear suspension, but with an axle locating trailing arm, that was upgraded to stronger semi-elliptic to cope with overloading by customers. The front suspension was independent and was used as the basis of the suspension of the first English Cooper racing cars in the 1940s that became successful in the 1950s.[42] It had a four speed gearbox (when three was common) and all hydraulic brakes.[43] It was a similar size to the Austin Seven but much more advanced. It was facelifted with American influenced 'full width styling' of the frontal panels after the war, with headlights integrated into the wings/fenders.

1936 Steyr 50 Baby

The Volkswagen Beetle would be the longest-lasting icon of this 1930s era. Adolf Hitler admired the ideals exemplified by the Ford Model T, (even though he didn't drive himself), and sought the help of Ferdinand Porsche to create a 'peoples-car' - literally Volks-Wagen, with the same ideals for the people of Germany. This car was to complement the new Autobahns that were to be built. They had been planned under the Weimar Republic, but he stole the credit for them.[39] Many of the design ideas were plagiarised from the work of Hans Ledwinka, the Tatra T97 and Tatra V570 with the Czechoslovakian Tatra (car) company. It was also suspiciously similar in many ways to the Josef Ganz–designed cars, it even looked very similar to the Mercedes-Benz 120H prototype of 1931.[40] The Nazi "KdF-Wagen" ("Strength through Joy - Car") project ground to a halt before serious production had started because of World War II, but after the war, the Volkswagen company would be founded to produce the car in the new democratic West Germany, where it would be a success. The KdF, was the Nazi state organisation to promote leisure activities of the population, approved of, and monitored by, the state.

KdF Propaganda – "A family playing by a river with a KdF-VolksWagen and Volks-Radio receiver"
Brochure for the Standard Superior, 1934 - Enough space for us four in the quickest and cheapest

In Berlin in February 1933, the first production model of the Standard Superior was introduced at the IAMA (Internationale Automobil- und Motorradausstellung). It had a 396 cc 2-cylinder 2-stroke engine. Because of some criticism of the body design, not in the least by Josef Ganz in Motor-Kritik, it was followed in April 1933 by a slightly altered model. In November 1933, the Standard Fahrzeugfabrik introduced yet another new and improved model for 1934, which was slightly longer with one additional window on each side and had a small seat for children or as luggage space in the back. This car was advertised as the German Volkswagen. During the early 1930s German car manufacturers one by one adopted the progressive ideas published in Motor-Kritik since the 1920s. In the meantime in May 1933, the Jewish Josef Ganz was arrested by the Gestapo on trumped up charges of blackmail of the automotive industry, at the instigation of those that he had ferociously criticized. He was eventually released, but his career was systematically destroyed and his life endangered. He fled Germany in June 1934 – the same month Adolf Hitler gave Ferdinand Porsche the brief for designing a mass-producible car for a consumer price of 1,000 Reichsmark.[38] Production of the Standard Superior ended in 1935. The Standard company was forbidden by the Nazis from using the term 'Volkswagen'.

In the late 1920s in Germany, Josef Ganz independent car engineer/inventor and editor of Motor-Kritik magazine was a fierce opponent of the status quo of car design. He became a consultant engineer to Adler in December 1930. In the first months of 1931, Ganz constructed a lightweight economy car or peoples car, prototype at Adler with a tubular chassis, a mid-mounted engine, and swing axle independent rear suspension. After completion in May 1931, Ganz nicknamed his new prototype Maikäfer (German for cockchafer) which is a species of beetle.[36] In July 1931 he was also consultant engineer to BMW on the 1932-34 BMW 3/20 successor to the BMW 3/15 model. It featured transverse leaf independent front and rear suspension and an updated overhead-valve cylinder head version of the Austin 7 based engine. After a demonstration of the Adler Maikäfer by Ganz, the German Standard Fahrzeugfabrik company (unrelated to the British 'Standard' company), then purchased a license from Ganz to develop and build a small car according to his design. The prototype of this new model, which was to be called Standard Superior, was finished in 1932. It featured a tubular chassis, a mid-mounted engine, and independent wheel suspension with swing-axles at the rear. At about the same time from 1931, two years prior to Hitler's accession to power, Ferdinand Porsche founded Dr. Ing. h. c. F. Porsche GmbH - the Porsche company to offer motor vehicle development work and consulting. Together with Zündapp they developed the prototype "Auto für Jedermann" ("car for everyone"), which was the first time the name "Volkswagen" was used. Porsche preferred a 4-cylinder flat engine, but Zündapp used a water-cooled 5-cylinder radial engine. In 1932 three prototypes were running but were not put into production. All three cars were lost during the war, the last in 1945 in Stuttgart during a bombing raid.[37]

until the late 1980s. Wartburg and Trabant. The DKW type of two stroke engine was replaced with four strokes in western economy cars by the 1960s, but lived on in stagnating and cash strapped East Germany's Suzuki, and Honda, Daihatsu, Mazda, Mitsubishi, Kawasaki, Puch, Piaggio, Subaru, Saab, Wartburg, Trabant, BSA, Harley-Davidson with chain drive. This was developed through the 1930s into the 1938 F8 model and the F9 that was not put into production because World War II started, 250,000 were made. By this time DKW had become the largest manufacturer of motorcycles in the world. Their two-stroke engine technology was to appear in the postwar products of two-stroke engine using a water-cooled 494 cc or 584 cc transverse two-cylinder front-engine, front-wheel-drive layout made about 500, production lasted for only four months.) The F1 featured a Ruxton The 1930 U.S. [35] having been seriously flawed, production ended at 4,429.Cord L-29 The 1929 U.S. [34]

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.