World Library  
Flag as Inappropriate
Email this Article

End-diastolic dimension

Article Id: WHEBN0023678683
Reproduction Date:

Title: End-diastolic dimension  
Author: World Heritage Encyclopedia
Language: English
Subject: Edd
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

End-diastolic dimension

In the heart, a ventricle is one of two large chambers that collect and expel blood received from an atrium towards the peripheral beds within the body and lungs. The atrium (an adjacent/upper heart chamber that is smaller than a ventricle) primes the Pump. Interventricular means between two or more ventricles (for example the interventricular septum), while intraventricular means within one ventricle (for example an intraventricular block).

In a four-chambered heart, such as that in humans, there are two ventricles: the right ventricle pumps blood into the pulmonary circulation to/for the lungs, and the left ventricle pumps blood into the systemic circulation through the aorta (systemic circulation). (See Double circulatory system for details.)

Ventricles have thicker walls than atria and generate higher blood pressures. The physiologic load on the ventricles requiring pumping of blood throughout the body and lungs is much greater than the pressure generated by the atria to fill the ventricles. Further, the left ventricle has thicker walls than the right because it needs to pump blood to most of the body while the right ventricle fills only the lungs.

The mass of the left ventricle, as estimated by magnetic resonance imaging, averages 143 g ± 38.4 g, with a range of 87––224 g.[1]

In systole and diastole

During systole, the ventricles contract, pumping blood through the body. During diastole, the ventricles relax and fill with blood again.

Volumes

In cardiology, the performance of the ventricles are measured with several volumetric parameters, including end-diastolic volume (EDV), end-systolic volume (ESV), stroke volume (SV)and ejection fraction (Ef).

Measure Typical value Normal range
end-diastolic volume (EDV) 120 mL[2][non-primary source needed] 65–240 mL[2][non-primary source needed]
end-systolic volume (ESV) 50 mL[2][non-primary source needed] 16–143 mL[2][non-primary source needed]
stroke volume (SV) 70 mL 55–100 mL
ejection fraction (Ef) 58% 55–70%[3]
heart rate (HR) 75 bpm 60–100 bpm[4]
cardiac output (CO) 5.25 L/minute 4.0–8.0 L/min[5]

Dimensions

The heart and its performance are also commonly measured in terms of dimensions, which in this case means one-dimensional distances, usually measured in millimeters. This is not as informative as volumes, but may be much easier to estimate with e.g. M-Mode echocardiography[6] or with sonomicrometry (mostly used for animal model research). Optimally, it is specified with which plane the distance is measured in, e.g. the dimension of the longitudinal plane.[7]

Dimension Abbreviation Definition Normally
End-diastolic dimension EDD The diameter across a ventricle at the end of diastole, if not else specified then usually referring to the transverse[8] (left-to-right) internal (luminal) distance, excluding thickness of walls, although it can also be measured as the external distance.
Left ventricular end-diastolic dimension
LVEDD or sometimes LVDD The end-diastolic dimension of the left ventricle. 48 mm,[9]
Range 36 – 56 mm[10]
Right ventricular end-diastolic dimension
RVEDD or sometimes RVDD The end-diastolic dimension of the right ventricle. Range 10 – 26 mm[10]
End-systolic dimension ESD ESD is similar to the end-diastolic dimension, but is measured at the end of systole (after the ventricles have pumped out blood) rather than at the end of diastole.
Left ventricular end-systolic dimension
LVESD or sometimes LVSD The end-systolic dimension of the left ventricle. Range 20 – 40 mm[10]
Right ventricular end-systolic dimension
RVESD or sometimes RVSD The end-systolic dimension of the right ventricle. Range 10 – 26 mm[10]
Interventricular septal end diastolic dimension IVSd The thickness of the interventricular septum. 8.3 mm,[9]
Range 7 – 11 mm[10]
Left ventricular end diastolic posterior wall dimension LVPWd The thickness of the posterior left ventricular wall. 8.3 mm,[9]
Range 7 – 11 mm[10]
Left atrial dimension LA Range 24 – 40 mm[10]

Fractional shortening (FS) is the fraction of any diastolic dimension that is lost in systole. When referring to endocardial luminal distances, it is EDD minus ESD divided by EDD (times 100 when measured in percentage).[11] Normal values may differ somewhat dependent on which anatomical plane is used to measure the distances, but a range from 30 to 42% is considered normal with 26 to 30% representing a mild decrease in function.[12] Midwall fractional shortening may also be used to measure diastolic/systolic changes for inter-ventricular septal dimensions[13] and posterior wall dimensions. However, both endocardial and midwall fractional shortening are dependent on myocardial wall thickness, and thereby dependent on long-axis function.[14] By comparison, a measure of short-axis function termed epicardial volume change (EVC) is independent of myocardial wall thickness and represents isolated short-axis function.[14]

See also

References

  1. End-systolic volume (left ventricular) – average 50.1 and range, 16 – 143 mL:
  2. Also, ejection fraction was estimated in this study to be average 59.9% ± 14.4%; range, 18 – 76%, but secondary source (see above) is used in this article instead.

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.