World Library  
Flag as Inappropriate
Email this Article

Tamping machine

Article Id: WHEBN0004523237
Reproduction Date:

Title: Tamping machine  
Author: World Heritage Encyclopedia
Language: English
Subject: Modalohr, Rotary car dumper, Quarry tub, Rolling stock manufacturers of Russia, Stoneblower
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Tamping machine

Ballast tamping machine as used in railroad track maintenance

A tamping machine or ballast tamper is a machine used to pack (or tamp) the track ballast under railway tracks to make the tracks more durable. Prior to the introduction of mechanical tampers, this task was done by manual labour with the help of beaters. As well as being faster, more accurate, more efficient and less labour-intensive, tamping machines are essential for the use of concrete sleepers since they are too heavy (usually over 250 kg (551 lb)) to be packed into the ballast by hand.

Early machines only lifted the track and packed the ballast. More modern machines, sometimes known as a tamper-liner or tamping and lining machine, also correct the alignment of the rails to make them parallel and level, in order to achieve a more comfortable ride for passengers and freight and to reduce the mechanical strain applied to the rails by passing trains.

Functions

A Balfour Beatty ballast tamper/track tamper train at Banbury station
  • Packing of ballast under sleepers
  • Correction of cross level
  • Correction of longitudinal level
  • Driving
    • Run drive
    • Work drive
  • Special functions
    • Twist corrections
    • Track settlement
    • Laser lining
    • Automatic data feeding by computer
    • Recording of track parameter

Types

A GTRM Rail tamping machine
An Amey Plc tamping machine

Ballast Tampers are built in many different varieties depending on their purpose:

Tamping machines
  • Straight track tamping machines:
    • Universal tamping machines (U.T.)
    • Unomatic
    • Duomatic
    • Continuous action tamping machines (C.S.M.)
    • Tamping Express
  • Points and crossing tamping machines (UNIMAT)
  • Multi-purpose tamping machines (M.P.T.)
Non-tamping machines
  • DTS (DGS), Dynamic Track Stabilizing Machine
  • Points And Crossing Relaying Machine (P&C T-28)
  • Track Relaying Train (T.R.T.)
  • Straight Track Laying Machines (P.Q.R.S.)

General arrangement

The majority of track machines are powered by a diesel engine. This provides power to the driving wheels via a cardan shaft, allowing the machine to propel itself to and around a work-site. The engine also drives an hydraulic pump to provide power for the various tools.

Tamping units

Closeup of a Plasser & Theurer 08-4x4/4S-RT Unimat 08-RT Tamper at Bristol Temple Meads
Unimat 09-32/4S at work

For each rail there is a tamping unit attached to the main frame by means of vertical guide columns and a lifting / lowering hydraulic cylinder. The tamping unit consists of tamping tools (arms or "tines"), a hydraulic vibration motor, a vibration shaft and an eccentric flywheel. For each sleeper, a tamping unit is provided with four pairs of tamping arms: one each side of the sleeper, i.e., 16 tamping arms are used for tamping a single sleeper. To process several sleepers simultaneously, a tamping unit may have between 32 and 64 arms (for up to four sleepers), leading to the derivation of machine type numbers: "16" indicates 16 tines, enough for a single sleeper, "32" for two sleepers. Machines capable of processing greater amounts of sleepers per movement are now labelled by the Plasser 'X' methodology. 09-2X for two sleepers, 09-3X for three sleepers and 09-4X for four, etc.

Tamping units of a Unimat have swivelling tamping arms to pack points and crossings.

Special units are available for use with third-rail electrified track.

Universal tamping machine

This type of straight-track tamping machine is the oldest of the varieties. It uses a two-chord lining system for alignment of track (for slewing the track to left or right, as-and-when required). This type of lining is controlled mechanically. The machine has four bogies, one at the front, one at the rear, a third in the centre and a fourth in between the centre and the rear. They are called: front-tightening, rear-tightening, lining bogie and measuring bogie, respectively.

The measuring bogie determines the amount of slewing required and measures the subsequent adjustments applied by the lining bogie. The lining bogie also lifts the track to make it level. The tamping bank behind the lining bogie has a vibrating motor and four arms for each rail.

A tamping cycle comprises three operations:

  1. Penetration – The arms are pushed down vertically into the ballast either side of a sleeper.
  2. Squeezing – The arms squeeze the ballast under the sleeper, packing it together.
  3. Moving – The arms are lifted and the machine is moved to the next sleeper to repeat the cycle.

The operations are controlled from the control cabin by an operator using three pedals, while the lining bogie holds the track in its lifted and slewed position.

Specialist tamping machines

Continuous Action Tamping Machines

A Continuous Action Tamping Machine (CAT) can pack between one and four sleepers at a time, with outputs between 320m/h and 2600m/h generally anticipated.[1]

Dynamic Tamping Express

The 'Tamping Express' is a machine developed by Plasser & Theurer, and in the UK & Europe is referred to as the 09-3X. This machine consists of a conventional CAT style satellite with tooling for 3 sleepers in continuous succession, along with a full DTS stabilising unit suspended from the rear most vehicle in the machine.[2]

DGS / DTS (Dynamic Track Stabilising)

Tamper in Jarvis PLC Fastline livery

Tamping and cleaning operations have the adverse effect of reducing the resistance of the track to lateral movement. The resistance gradually recovers with the passage of trains, but may require a speed restriction imposed for the duration. This 'consolidation' can be achieved faster and in a more controlled manner using mechanised equipment known as the Dynamic Track Stabiliser (DTS).

A DTS will normally be used only after a stretch of track has been tamped and aligned.

D.G.S. has a vibrating unit which holds the track in position and applies a horizontal vibration and vertical load to simulate the passage of trains. The track parameters (or cross levels), before and after stabilising, can be viewed through bogies in the front and rear.

Dynamic Track Stabilising has the following advantages, resulting in enhanced safety:

  • Increases the resistance of the track to lateral movement
  • Creates a homegenous bed of ballast
  • Permits earlier relaxation of speed restrictions
  • Eliminates non-uniform initial differential settlements caused by rail traffic
  • Retains correct track geometry for a longer period than was achievable using tamping machines alone
  • Vibration frequency: 30–35 Hz
  • Working speed: 1–2 km/h
  • Vertical pressure applied: 100 kg/cm²

The stabilisation achieved by one pass of a D.G.S. is equal to that achieved by 100,000 tonnes of traffic, and allows a speed restriction of 20 km/h to be relaxed to 40 km/h

Dynamic stabilisation is usually avoided on bridges or around overhead structures since there is a risk of damage to foundations.

Image gallery

Polish tamping machine 
French tamping machine 
German tamping machine 
Czech narrow gauge tamping machine 
Amey Plc tamping machine 
Amey Plc tamping machine 
Amey Plc tamping machine 
Amey Plc tamping machine 
Balfour Beatty tamping machine 
Balfour Beatty tamping machine 
Balfour Beatty and Carillion tamping machine 
Carillion tamping machine 

See also

References

  1. ^ http://www.plasseramerican.com/en/p_tamping/094xdynamic.htm
  2. ^ http://www.plasseramerican.com/en/p_tamping/093xdynamic.htm

Further reading

  • Indian Railway Track Design, Construction, Maintenance & Modernisation – M.M. Agarwal (former Chief Engineer, Northern Railway, New Delhi) Hony. Adviser, Institution of P.way Engineers (India), Railway Board Office, New Delhi—ISBN 81-900613-1-3
  • Plasser and Theurer Track Geometry Maintenance Durability Seminar, Athens, October 11, 2011, Ing. Rudolf Becker
  • YouTube video of Iarnród Éireann Tamper: http://www.youtube.com/watch?v=pmnX7L_nQBQ

External links

  • Audio recording of tamping machine
  • Photos of dynamic track stabilisers in the UK
  • Photos of tampers in the UK
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.