World Library  
Flag as Inappropriate
Email this Article

Triumph Renown

Article Id: WHEBN0016877199
Reproduction Date:

Title: Triumph Renown  
Author: World Heritage Encyclopedia
Language: English
Subject: Triumph 2000, Triumph TR, Triumph Roadster, Triumph Mayflower
Publisher: World Heritage Encyclopedia

Triumph Renown

Triumph 1800 & 2000 Town & Country Saloon and Renown
Manufacturer Standard Motor Company
Production 1946–54. 15,491 made[1]
Body and chassis
Body style 4 door saloon, limousine.
Engine 1766 cc or 2088 cc Straight-4 overhead valve
Transmission 3-speed manual
Wheelbase 108 in (2,743 mm) 1800, 2000 & Renown
111 in (2,819 mm) TDC & limousine[2]
Length 168 in (4,267 mm) 2000
178 in (4,521 mm)Renown
181 in (4,597 mm) TDC & limousine[2]
Width 64 in (1,626 mm)[2]
Height 65 in (1,651 mm)[3]

The Triumph Renown is strictly the name given to the Triumph's large saloon car made from 1949 to 1954 but it is, in reality, part of a three-car series of the 1800, 2000 and Renown models. Together with the Triumph Roadster, they were the first vehicles to carry the Triumph badge following the company's takeover by the Standard Motor Company.

The cars were distinctively styled with what became known as Razor Edge coachwork. The six light (featuring three side windows on each side) design and the thin C pillars at the rear of the passenger cabin anticipated the increased window areas that would become a feature of British cars during the 1960s. The car's side profile resembled that of the contemporary prestigious Triumph Mayflower.

The body was built by Mulliners of Birmingham in the traditional coachbuilder's method of sheet metal over a wooden frame.[1] The principal panels were constructed not from steel, which was in short supply in the wake of the Second World War, but from aluminium. It had been used extensively for aircraft manufacture during the war, which had taken place in a number of car plants (known at the time as "shadow factories") in the English Midlands. But by the mid-1950s aluminium had become the more expensive metal, which may have hastened the Renown's demise.

Triumph 1800 Town & Country Saloon 1946–49

The 1776 cc, 65 bhp (48 kW) engine and the gearbox for the 1800 came from the pre-war Standard Flying Fourteen. The chassis was fabricated from tubular steel and was a lengthened 108 in (2,743 mm) version of the one on the Roadster with which it also shared its transverse leaf spring front suspension. The cars were well fitted out with leather seats and a wooden dashboard.

A total of 4000 were produced. It cost £1425 including purchase tax.[4]

Triumph 2000 TDA 1949

The 2000 Type TDA was only made for one year and was essentially a Triumph 1800 with larger engine. The front independent suspension used a transverse leaf spring.

The car used a 2088 cc four-cylinder engine with single Solex carburettor as fitted to the Vanguard. The engine developed 68 bhp (51 kW) at 4200 rpm. The 3-speed gearbox with column shift also came from the Vanguard and had synchromesh on all the forward ratios. There was independent suspension at the front but a solid axle and half-elliptic leaf springs was at the rear. Lockheed hydraulic brakes with 9 in (229 mm) drums were fitted.

2000 were produced.[4]

Triumph Renown Mk I TDB 1949–52

The car was renamed the Renown in October 1949. It had an entirely new chassis based on the Standard Vanguard with pressed steel sections replacing the tubes previously used. The front suspension changed to coil springing. Although the 3-speed column change transmission was retained, from June 1950 an overdrive unit was offered as an option. Inside there was a new instrument layout.

A Renown tested by the British magazine The Motor in 1950 had a top speed of 75.0 mph (120.7 km/h) and could accelerate from 0–60 mph (97 km/h) in 24.3 seconds. A fuel consumption of 23.9 miles per imperial gallon (11.8 L/100 km; 19.9 mpg-US) was recorded. The test car cost £991 including taxes.[5]

Of the 6501 produced, fewer than 10 are known to have survived.[4]

Triumph Renown Limousine 1951–54

(188 in 1952; 3 in 1953; 3 in 1954)

In 1951 a limousine version was announced with an extra 3 in (76 mm) in the wheelbase. A division (glass partition) was placed behind the driver separating the front and back of the car. A radio and heater were fitted as standard.

A limousine with overdrive tested by The Motor magazine in 1952 had a top speed of 77.5 mph (124.7 km/h) slightly quicker than they had recorded two years earlier for the saloon and could accelerate from 0–60 mph (97 km/h) in 25.0 seconds. The reported fuel consumption was 21.6 miles per imperial gallon (13.1 L/100 km; 18.0 mpg-US). The test car cost £1440 including taxes.[3]

A total of 190 were made.[4]

Triumph Renown Mk II TDC 1952–54

The final version of the Renown used the longer-wheelbase chassis from the limousine.

Of the 2800 produced, only 7 remain worldwide.[4]

Demise and replacement

There was no direct replacement Triumph saloon following the end of Renown production. A badge-engineered version of the Standard Vanguard Phase III intended to be called the Triumph Renown was built with a version of the upright Triumph radiator grille and the Triumph "world" badges, but shortly before the model's launch in August 1956 it was decided to badge it as the Standard Vanguard Sportsman instead.

Die-cast models

  • Dinky Toys modelled the Renown in 1:48 scale in the 1950s.
  • Lansdowne produced a model in the first decade of the 21st century.


External links

  • Triumph Razoredge Owners club

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.