World Library  
Flag as Inappropriate
Email this Article

Trivial File Transfer Protocol

Article Id: WHEBN0000052806
Reproduction Date:

Title: Trivial File Transfer Protocol  
Author: World Heritage Encyclopedia
Language: English
Subject: List of RFCs, Network booting, IPXE, HP X-Terminals, User Datagram Protocol
Collection: Network Booting, Network File Transfer Protocols, Network Protocols, Networking Standards, Unified Extensible Firmware Interface
Publisher: World Heritage Encyclopedia

Trivial File Transfer Protocol

Trivial File Transfer Protocol (TFTP) is a simple, lock-step, file transfer protocol which allows a client to get or put a file onto a remote host. One of its primary uses is in the early stages of nodes booting from a Local Area Network. TFTP has been used for this application because it is very simple to implement.


  • Overview 1
  • Details 2
  • IETF standards documentation 3
  • See also 4
  • References 5


Due to its simple design, TFTP can be easily implemented by small footprint code. It is therefore the protocol of choice for the initial stages of any network booting strategy like BOOTP, PXE, BSDP, etc, when targeting from highly resourced computers to very low resourced Single-board computers (SBC) and System on a Chip (SoC). It is also used to transfer firmware images and configuration files to network appliances like routers, firewalls, IP phones, etc. Today TFTP is virtually unused for Internet transfers.

TFTP's design was influenced from the earlier protocol EFTP, which was part of the PUP protocol suite. TFTP was first defined in 1980 by IEN 133.[1] In June 1981 The TFTP Protocol (Revision 2) was published as RFC 783 and later updated in July 1992 by RFC 1350 which fixed among other things the Sorcerer's Apprentice Syndrome. In March 1995 the TFTP Option Extension RFC 1782 updated later in May 1998 by RFC 2347, defined the option negotiation mechanism which establishes the framework for file transfer options to be negotiated prior to the transfer using a mechanism which is consistent with TFTP's original specification.

TFTP is a simple protocol for transferring files, implemented on top of the UDP/IP protocols using IANA registered port number 69. TFTP was designed to be small and easy to implement, and therefore it lacks most of the advanced features offered by more robust file transfer protocols. TFTP only reads and writes files from or to a remote server. It cannot list, delete, or rename files or directories and it has no provisions for user authentication. Today TFTP is generally only used on local area networks (LAN).


(W1) Host A requests to write
(W2) Server S acknowledges request
(W3) Host A sends numbered data packets
(R1) Host A requests to read
(R2) Server S sends data packet 1
(R3) Host A acknowledges data packet 1

In TFTP, a transfer is initiated by the client issuing a request to read or write a particular file on the server. The request can optionally include a set of negotiated transfer parameters proposed by the client under the terms specified by RFC 2347. If the server grants the request, the file is sent in fixed length blocks of 512 bytes by default or the number specified in the blocksize negotiated option defined by RFC 2348. Each block of transferred data which is usually carried within a single IP packet in order to avoid IP fragmentation, must be acknowledged by an acknowledgment packet before the next block can be sent. A data packet of less than 512 bytes or the agreed blocksize option signals termination of a transfer. If a packet gets lost in the network, the intended recipient will timeout and may retransmit their last packet (which may be data or an acknowledgment), thus causing the sender of the lost packet to retransmit that lost packet. The sender has to keep just one packet on hand for retransmission, since the lock step acknowledgment guarantees that all older packets have been correctly received. Notice that both devices involved in a transfer are considered senders and receivers. One sends data and receives acknowledgments, the other sends acknowledgments and receives data.

TFTP defines three modes of transfer: netascii, octet, and mail.

  1. Netascii is a modified form of ASCII, defined in RFC 764. It consists of an 8-bit extension of the 7-bit ASCII character space from 0x20 to 0x7F (the printable characters and the space) and eight of the control characters. The allowed control characters include the null (0x00), the line feed (LF, 0x0A), and the carriage return (CR, 0x0D). Netascii also requires that the end of line marker on a host be translated to the character pair CR LF for transmission, and that any CR must be followed by either a LF or the null.
  2. Octet allows for the transfer of arbitrary raw 8-bit bytes, with the received file resulting byte-per-byte identical to the one sent. More correctly, if a host receives an octet file and then returns it, the returned file must be identical to the original.[2]
  3. Mail transfer mode uses Netascii transfer, but the file is sent to an email recipient by specifying that recipient's email address as the file name. RFC 1350 declared this mode of transfer obsolete.

TFTP uses UDP as its transport protocol. A transfer request is always initiated targeting port 69, but the data transfer ports are chosen independently by the sender and receiver during the transfer initialization. The ports are chosen at random according to the parameters of the networking stack, typically from the range of ephemeral ports.[3]

  1. The initiating host A sends an RRQ (read request) or WRQ (write request) packet to host S at port number 69, containing the filename, transfer mode, and optionally any negotiated option under the terms of RFC 2347.
  2. S replies with an option ACK if options where used, and an ACK (acknowledgement) packet to WRQ and directly with a DATA packet to RRQ. Packet is sent from a randomly allocated ephemeral port, and all future packets to host S should be directed to this port.
  3. The source host sends numbered DATA packets to the destination host, all but the last containing a full-sized block of data (512 bytes default). The destination host replies with numbered ACK packets for all DATA packets.
  4. The final DATA packet must contain less than a full-sized block of data to signal that it is the last. If the size of the transferred file is an exact multiple of the block-size, the source sends a final DATA packet containing 0 bytes of data.
  5. Receiver responds to each DATA with associated numbered ACK. Sender responds to the first received ACK of a block with DATA of the next block.
  6. If an ACK is not eventually received, a retransmit timer re-sends DATA packet.

TFTP includes no login or access control mechanisms. Care must be taken in the rights granted to a TFTP server process so as not to violate the security of the server's file system. TFTP is often installed with controls such that only files that have public read access are available via TFTP. Also, listing, deleting, renaming, and writing files via TFTP are typically disallowed. The use of TFTP is appropriate on networks where the inherent protocol limitations are not a liability.

TFTP has always been associated to network booting. One of the first attempts in this regard was the Bootstrap Loading using TFTP standard RFC 906, published in 1984, which established the 1981 published Trivial File Transfer Protocol standard RFC 783 to be used as the standard file transfer protocol for bootstrap loading. It was followed shortly after by the Bootstrap Protocol standard RFC 951 (BOOTP), published in 1985, which allowed a disk-less client machine to discover its own IP address, the address of a TFTP server, and the name of a Network Bootstrap Program (NBP) to be TFTP transferred, loaded into memory, and executed. Dynamic Host Configuration Protocol standard RFC 2131 (DHCP) published in 1997 improved BOOTP capabilities. Finally, the Preboot Execution Environment (PXE) version 2.0 was released in December 1998, and the update 2.1 was made public in September 1999 counting on TFTP as its file transfer protocol.[4] Intel has recently decided to widely support PXE within the new UEFI specification extending the TFTP support to all EFI/UEFI environments.[5][6]

The original protocol has a transfer file size limit of 512 bytes/block x 65535 blocks = 32 MB. In 1998 this limit was extended to 1468 bytes/block x 65535 blocks = 93 MB by TFTP Blocksize Option RFC 2348. If IP fragmentation is not an option the maximum block size is the size of an Ethernet MTU (1500) minus the headers of TFTP (4 bytes), UDP (8 bytes) and IP (20 bytes) = 1468 bytes/block. Today most servers and clients support block number roll-over (block counter going back to 0 after 65535) which gives an essentially unlimited transfer file size.

Since TFTP utilizes UDP, it has to supply its own transport and session support. Each file transferred via TFTP constitutes an independent exchange. Classically, this transfer is performed in lock-step, with only one packet (either a block of data, or an 'acknowledgement') alternatively in flight on the network at any time. Due to this single data block strategy instead of sending a fluid amount of data blocks before to pause the transfer waiting for an acknowledge (windowing), TFTP provides low throughput specially over high latency links. Note that Windows 2008 introduced windowed TFTP as part of Windows Deployment Services (WDS) and uses an 8 block, window by default. This substantially improves performance for things like PXE booting.

IETF standards documentation

RFC Number Title Published Author Obsolete and Update Information
RFC 783 The TFTP Protocol (Revision 2) June 1981 K.Sollins Obsoleted by - RFC 1350
RFC 906 Bootstrap Loading using TFTP June 1984 Ross Finlayson -
RFC 951 Bootstrap Protocol Sep.1985 Bill Croft Updated by RFC 1395, RFC 1497, RFC 1532, RFC 1542, RFC 5494
RFC 1350 The TFTP Protocol (Revision 2) July 1992 K.Sollins Updated by RFC 1782, RFC 1783, RFC 1784, RFC 1785, RFC 2347, RFC 2348, RFC 2349
RFC 1782 TFTP Option Extension March 1995 G. Malkin Obsoleted by - RFC2347
RFC 2131 Dynamic Host Configuration Protocol March 1997 R. Droms Updated by RFC 3396, RFC 4361, RFC 5494, RFC 6842
RFC 2347 TFTP Option Extension May 1998 G.Malkin -
RFC 2348 TFTP Blocksize Option May 1998 G.Malkin -
RFC 2349 TFTP Timeout Interval and Transfer Size Options May 1998 G.Malkin -

See also


  1. ^ Karen R. Sollins (1980-01-29). The TFTP Protocol. . Retrieved 2010-05-01.
  2. ^ RFC 1350, page 5.
  3. ^ Karen R.Sollins (July 1992). The TFTP Protocol (Revision 2). . Retrieved 2010-05-01.
  4. ^ "Preboot Execution Environment (PXE) Specification - Version 2.1" (PDF). Intel Corporation. 1999-09-20. Retrieved 2014-02-08. 
  5. ^ "Unified Extensible Firmware Interface Specification" (PDF). UEFI. 2013-12-02. Retrieved 2014-04-04. 
  6. ^ "UEFI PXE Boot Performance Analysis" (PDF). Intel Corporation. 2014-02-02. Retrieved 2014-04-04. 
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.