This article will be permanently flagged as inappropriate and made unaccessible to everyone. Are you certain this article is inappropriate? Excessive Violence Sexual Content Political / Social
Email Address:
Article Id: WHEBN0000887766 Reproduction Date:
Ultra low frequency (ULF) is the ITU designation[1] for the frequency range of electromagnetic waves between 300 hertz and 3 kilohertz. In magnetosphere science and seismology, alternative definitions are usually given, including ranges from 1 mHz to 100 Hz,[2] 1 mHz to 1 Hz,[3] 10 mHz to 10 Hz.[4] Frequencies above 3 Hz in atmosphere science are usually assigned to the ELF range.
Many types of waves in the ULF frequency band can be observed in the magnetosphere and on the ground. These waves represent important physical processes in the near-Earth plasma environment. The speed of the ULF waves is often associated with the Alfvén velocity that depends on the ambient magnetic field and plasma mass density.
This band is used for communications in mines, as it can penetrate the earth.[5]
Some monitoring stations have reported that earthquakes are sometimes preceded by a spike in ULF activity. A remarkable example of this occurred before the 1989 Loma Prieta earthquake in California,[6] although a subsequent study indicates that this was little more than a sensor malfunction.[7] On December 9, 2010, geoscientists announced that the DEMETER satellite observed a dramatic increase in ULF radio waves over Haiti in the month before the magnitude 7.0 Mw 2010 earthquake.[8] Researchers are attempting to learn more about this correlation to find out whether this method can be used as part of an early warning system for earthquakes.
ULF has been used by the military for secure communications through the ground. NATO AGARD publications from the 1960s detailed many such systems, although it is possible that the published papers left a lot unsaid about what actually was developed secretly for defense purposes. Communications through the ground using conduction fields is known as "Earth-Mode" communications and was first used in World War I. Radio amateurs and electronics hobbyists have used this mode for limited range communications using audio power amplifiers connected to widely spaced electrode pairs hammered into the soil. At the receiving end, the signal is detected as a weak electric current between a further pair of electrodes. Using weak signal reception methods with PC-based DSP filtering with extremely narrow bandwidths, it is possible to receive signals at a range of a few kilometers with a transmitting power of 10-100 W and electrode spacing of around 10–50 m.
ELF 3 Hz/100 Mm 30 Hz/10 Mm
SLF 30 Hz/10 Mm 300 Hz/1 Mm
ULF 300 Hz/1 Mm 3 kHz/100 km
VLF 3 kHz/100 km 30 kHz/10 km
LF 30 kHz/10 km 300 kHz/1 km
MF 300 kHz/1 km 3 MHz/100 m
HF 3 MHz/100 m 30 MHz/10 m
VHF 30 MHz/10 m 300 MHz/1 m
UHF 300 MHz/1 m 3 GHz/100 mm
SHF 3 GHz/100 mm 30 GHz/10 mm
EHF 30 GHz/10 mm 300 GHz/1 mm
THF 300 GHz/1 mm 3 THz/0.1 mm
Electromagnetic spectrum, Ultra low frequency, High frequency, Very high frequency, Ultra high frequency
Russia, Amateur radio, China, United States, Electromagnetic spectrum
Internet, Very high frequency, L band, Ku band, Bluetooth
Amateur radio, High frequency, Telecommunication, Very high frequency, Ultra high frequency
Electromagnetic spectrum, High frequency, Low frequency, Very high frequency, Ku band