World Library  
Flag as Inappropriate
Email this Article

Unit load device

Article Id: WHEBN0001208761
Reproduction Date:

Title: Unit load device  
Author: World Heritage Encyclopedia
Language: English
Subject: Cargo, Boeing 767, Boeing 747-8, Airliner, ULD
Collection: Civil Aviation, Shipping Containers
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Unit load device

Unloading LD3 containers from a Boeing 747

A unit load device (ULD) is a pallet or container used to load luggage, freight, and mail on wide-body aircraft and specific narrow-body aircraft. It allows a large quantity of cargo to be bundled into a single unit. Since this leads to fewer units to load, it saves ground crews time and effort and helps prevent delayed flights. Each ULD has its own packing list (or manifest) so that its contents can be tracked.

Contents

  • Types 1
  • Aircraft compatibility 2
    • ULD capacity 2.1
  • Identification 3
    • Common prefixes 3.1
  • Main-deck ULDs 4
  • See also 5
  • References 6
  • External links 7

Types

ULDs come in two forms: pallets and containers. ULD pallets are rugged sheets of aluminum with rims designed to lock onto cargo net lugs. ULD containers, also known as cans and pods, are closed containers made of aluminum or combination of aluminum (frame) and Lexan (walls), which, depending on the nature of the goods to be transported, may have built-in refrigeration units. Examples of common ULDs and their specifics are listed below.

Pallet volumes shown are built 64 in tall for lower deck loading. Height limit for main deck depends on aircraft type.

Aircraft compatibility

Cross-section of an Airbus A300 showing LD3 containers

LD3s, LD6s, and LD11s will fit 787s, 777s, 747s, MD-11s, Il-86s, Il-96s, L-1011s and all Airbus wide-bodies. The 767 uses the smaller LD2s and LD8s because of its narrower fuselage. The less common LD1 is designed specifically for the 747, but LD3s are more commonly used in its place because of ubiquity (they have the same floor dimensions such that one LD3 takes the place of one LD1). LD3s with reduced height (45 inch instead of 64 inch) can also be loaded on the Airbus A320 family. LD7 pallets will fit 787s, 777s, 747s, late model 767s (with the big door), and Airbus wide-bodies.

Interchangeability of certain ULDs between LD3/6/11 aircraft and LD2/8 aircraft is possible when cargo needs to be quickly transferred to a connecting flight. Both LD2s and LD8s can be loaded in LD3/6/11 aircraft, but at the cost of using internal volume inefficiently (33 ft³ wasted per LD2). Only the LD3 of the LD3/6/11 family of ULDs can be loaded in a 767; it will occupy an entire row where two LD2s or one LD8 would otherwise have fit (90 ft³ wasted per LD3). Policies vary from airline to airline as to whether such transfers are allowed.

One of the design requirements of the 787, was for it to use the LD3/6/11 family of ULDs to solve the wasted volume issue.

ULD capacity

Aircraft loads can consist of containers, pallets, or a mix of ULD types, depending on requirements. The table below indicates the maximum capacity of an aircraft for all-container and all-pallet configurations. In some aircraft the two types must be mixed as some compartments take only specific ULDs.

Container capacity of an aircraft is measured in positions. Each half-width container (LD1/LD2/LD3) in the aircraft it was designed for occupies one position. Typically, each row in a cargo compartment consists of two positions. Therefore, a full-width container (LD6/LD8/LD11) will take two positions. An LD6 or an LD11 can occupy the space of two LD3s. An LD8 takes the space of two LD2s.

Aircraft pallet capacity is measured by how many PMC-type LD7s (96 in × 125 in) can be stored. These pallets occupy approximately three LD3 positions (it occupies two positions of one row and half of the two positions of the following row) or four LD2 positions. PMCs can only be loaded in cargo compartments with large doors designed to accept them (small door compartments are container only).

Maximum capacity shown does not reflect weight restrictions.
Actual number of ULDs loaded may be lower if aircraft is at its weight limit.

Identification

All ULDs are identified by their ULD number. A three-letter prefix identifies its type, followed by a 4 or 5 digit serial number (4 if prior to October 1, 1993; either 4 or 5 if after October 1, 1993) to uniquely identify it from others of the same type, and ending with a two character (alpha-numerical) suffix identifying the ULD's owner (if an airline, often the same as IATA designator codes). For example, AKN 12345 DL means that the ULD is a forkliftable LD3 with the unique number 12345 and its owner is Delta Air Lines.[10]

Common prefixes

A string of LD3 containers with AKE prefix
An LD3-45 container with AKH prefix
  • AAA: LD7 container (88" x 125"), 81" tall, contoured for maindeck narrow-body
  • AAD: LD7 container (88" x 125"), 96" tall, contoured for maindeck wide-body (aka A1)
  • AAF:[11] LD26 container
  • AAP:[11] LD9
  • AAU:[11] LD29 container
  • AAY: LD7 container (88" x 125"), 81" tall, contoured for maindeck wide-body and narrow-body (aka A2)
  • AAZ: LD7 container (88" x 125"), 64" tall, contoured for maindeck wide-body and narrow-body and any belly (aka L9)
  • AGA:[11] M2 container
  • AKC:[11] LD1 without forklift holes
  • AKE:[11] LD3 without forklift holes/half ALF
  • AKH, AKW: LD3-45 mainly for A320/321, 45" tall, same base as AKE, extensions on both sides
  • AKN:[11] LD3 with forklift holes
  • ALB:[11] LD4 with forklift holes
  • ALD: LD11 container (aka L11)
  • ALF:[11] LD6 without forklift holes
  • ALP:[11] LD11 without forklift holes
  • ALP:[11] LD4 without forklift holes
  • AMA:[11] M1 container
  • AMD:[11] M1H container
  • AMJ: LD7 container (96" x 125"), 96" tall, contoured for main deck wide-body (aka M1)
  • AMU:[11] LD39 container contour similar to ALF, but deeper and bigger extensions. biggest lower-deck container
  • AVY:[11] LD1 with forklift holes
  • AWC:[11] LD6 with forklift holes
  • AYY:[11] Demi, a half-width contoured container typically used for the main deck
  • AYX:[11] AYY with fittings to connect a fire extinguisher so as to carry Dangerous Goods
  • DPE:[11] LD2 without forklift holes
  • DPN:[11] LD2 with forklift holes
  • DQF:[11] LD8 with forklift holes
  • FLA:[11] LD11 pallet
  • FQA: LD8 pallet (same floor dimensions as DQF)
  • HMA:[11] Horse stall
  • KMA:[11] Sheep and goat pen
  • P1P:[11] LD7, large pallet (88" x 125"), folding wings for overhang
  • PAD:[11] LD7, large pallet (88" x 125"), flat
  • PGA:[11] M6, large pallet (96" x 238.5"), freighter main deck only
  • PLA:[11] LD11 pallet
  • PMC: LD7, large pallet (96" x 125")
  • QKE: LD3 same as AKE but made of KEVLAR and designed to be bombproof. No forklift holes.
  • RAP:[11] LD9 with refrigeration unit
  • RAU:[11] LD29 container with refrigeration unit
  • RKN:[11] LD3 with refrigeration unit
  • RWB:[11] LD11 with refrigeration unit
  • SAA: Full-sized version of the AYY
  • SAX: Full-sized version of the AYX
  • VRA:[11] M6, large pallet (96" x 196"), twin car rack
  • XAW:[11] LD7, large pallet (88" x 125"), fixed wings for overhang
  • XKC: LD3 without forklift holes/half ALF

Position 1 letter identifies ULD category (certification, ULD type, thermal units);[10]
Position 2 letter identifies standard base dimensions:[10]
Position 3 letter identifies contour, forklift holes, and other miscellaneous information.[10]

Main-deck ULDs

On the main deck of cargo planes are 79 to 96 inches (2,007 to 2,438 mm) tall ULDs with footprints similar to those of 88 inches (2,235 mm) or 96 inches (2,438 mm) wide pallets and 62 inches (1,575 mm) or 125 inches (3,175 mm) long. A 62-inch (1,575 mm) wide x 88-inch (2,235 mm) tall ULD is half the volume of a 125-inch (3,175 mm) x 88 inch pallet. The 20 foot pallet is 238 inches (6,045 mm) long and 96 inches (2,438 mm) wide. What the actual dimensions of contoured upper deck ULDs are is very hard to know, because most manufacturers only profile width, length and height data.

There are several common types of contoured main deck ULDs, that are contoured (curved to fit in the plane's body) to provide as much cargo volume as possible. Initially ULD contouring was simply a triangle removed from one or two corners of the profile of the ULD, such as the common LD3 and LD6. Main deck ULDs use curves for the contoured shape to truly maximize cargo volume. Upper deck ULDs are just like lower deck ULDs that are either the full width of the plane with two corners of the profile removed (lower deck LD6 lower), or that container is cut in half, down the center line of the plane, (lower deck LD3 and upper deck AAX).

Main deck ULDs and pallets are not only taller than lower deck ULDs, they are frequently two or four times longer. They are usually organized like an LD6, using the width of the plane and missing two profile corners, or two very long LD3s, stored in parallel to use the planes width and each missing one profile corner, but often twice or four times as long from plane's nose to tail.

Many air cargo companies use main deck ULDs that have both features called dual-profile, so that on small planes such as the Boeing 727, they are stored widthwise and have two corners contoured, and on the bigger Boeing 767, they can be rotated 90 degrees and shipped in parallel like LD3s, so that only one corner is contoured when being used like an LD3. This greatly simplifies transportation of cargo containers at slight cost of cargo volume.

See also

References

  1. ^ a b c d "747-400/-400ER, Airplane Characteristics for Airport Planning", Section 2, Boeing, May 2011.
  2. ^ a b c d e f g "767-200/200ER/300/300ER/300 Freighter/400ER, Airplane Characteristics for Airport Planning", Section 2, Boeing, May 2011.
  3. ^ http://www.airnewzealand.com.au/international-cargo-containers
  4. ^ "727, Airplane Characteristics for Airport Planning", Section 2, Boeing, April 1985.
  5. ^ "747-100/-200/-300/-SP, Airplane Characteristics for Airport Planning", Section 2, Boeing, May 2011.
  6. ^ a b c "747-8 Airplane Description", Section 2, Boeing, September 2014.
  7. ^ "747-8 Technical Characteristics", Boeing, September 2014.
  8. ^ a b "777-200LR/-300ER/Freighter, Airplane Characteristics for Airport Planning", Section 2, Boeing, May 2011.
  9. ^ "MD-11, Airplane Characteristics for Airport Planning", Section 2, Boeing, May 2011.
  10. ^ a b c d Guide to Air Freight Containers
  11. ^ a b c d e f g h i j k l m n o p q r s t u v w x y z aa ab ac ad ae af ag ah "Boeing Cargo", Boeing, March 2012.

External links

  • Air Freight Container Specifications
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.