World Library  
Flag as Inappropriate
Email this Article

Opus quadratum

Article Id: WHEBN0008875690
Reproduction Date:

Title: Opus quadratum  
Author: World Heritage Encyclopedia
Language: English
Subject: Tomb of Priscilla, Roman arch (Medinaceli), Arch of Trajan (Benevento), Temple of Bellona (Rome), Mausoleum of Theoderic
Publisher: World Heritage Encyclopedia

Opus quadratum

Opus quadratum is an ancient Roman construction technique, in which squared blocks of stone of the same height were set in parallel courses, most often without the use of mortar.[1] The Latin author Vitruvius describes the technique.[2]


  • Technique 1
    • Etruscan way 1.1
    • Greek way 1.2
    • Roman concrete 1.3
  • See also 2
  • References 3


This technique was used by the Romans from about the 6th century BC, and over time the precision and accuracy of the block cutting improved. The technique continued to be used throughout the age of the Roman Empire, even after the introduction of mortar, and was often used in addition to other techniques. The type of stone, the size of the blocks, and the way the blocks were put together can all be used to help archaeologists date structures that display the technique.

Opus quadratum

Etruscan way

In early usage (often called the "Etruscan way"), the joints between the block introduce discontinuities, making the blocks uneven. Examples of such construction can be found in reservoirs, basements, terrace walls, and temple podiums in Etruscan cities and Rome.

Greek way

Subsequently (the "Greek way"), the blocks would be placed in one of two rotations. "Stretchers" would be placed so the longer side was on the face of the wall, and "headers" would be placed so the shorter side was on the face of the wall, and would thus extend further back into the wall thickness. Various patterns could be produced by changing how the blocks were placed, and it was common to strengthen the wall by ensuring that the joints between blocks were centered over the blocks in the row below.

Roman concrete

With the introduction of Roman concrete, continuous outer walls were often constructed, with some blocks laid as headers in order to attach to the inner wall. Tile or marble can be found cemented to such walls, but this was less common for those structures that were particularly load-bearing, such as arches and pillars used for bridges and aqueducts.

See also


  1. ^ G.R.H. Wright (23 November 2009). Ancient Building Technology, Volume 3: Construction (2 Vols). BRILL. pp. 1–.  
  2. ^
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.