World Library  
Flag as Inappropriate
Email this Article

Tandy 1000


Tandy 1000

Tandy 1000 EX's size was little bigger than that of a cat.

The Tandy 1000 was the first in a line of more-or-less IBM PC compatible home computer systems produced by the Tandy Corporation for sale in its RadioShack chain of stores.


  • Overview 1
    • Design and architecture 1.1
    • Hard disk drives 1.2
    • Retirement 1.3
  • Reception 2
  • Selected Tandy 1000 Models 3
    • Tandy 1000 3.1
    • Tandy 1000 HD 3.2
    • Tandy 1000 EX & SX 3.3
    • Tandy 1000 HX & TX 3.4
    • Tandy 1000 SL, SL/2, TL, TL/2, TL/3 3.5
    • Tandy 1000 RL, RL/HD, RLX, RSX 3.6
  • References 4
  • External links 5


Released in November 1984,[1] the $1,200 Tandy 1000 was designed as an inexpensive PC compatible with enhancements compatible with the IBM PCjr, but with a better keyboard.[2][3] ("How could IBM have made that mistake with the PCjr?" an amazed Tandy executive said regarding its chiclet keyboard.[4]) Although the press saw the computer as Tandy's "no small concession to" the influence of the IBM PC on the personal computer market, by mid-1985 it was Tandy's best-selling computer.[5] Although it came in a case closely resembling the IBM PC's desktop case, the 1000 was followed by a series of models which used home computer-style cases with the keyboard, motherboard and disk drives in one enclosure. These models appended two or three letters to the name, after a space (e.g. Tandy 1000 EX, Tandy 1000 HX, Tandy 1000 SX, Tandy 1000 TX, Tandy 1000 RL, Tandy 1000 RLX). In a few instances, after these letters a slash was appended, followed by either a number or additional letters (e.g. Tandy 1000 TL/2, Tandy 1000 RL/HD).

The 1000 included joystick ports like the PCjr, and copied its 16-color graphics and 3-voice sound, but not the PCjr ROM cartridge ports. Since IBM discontinued the PCjr soon after the 1000s release, Tandy quickly removed mentions of the PCjr in its advertising while emphasizing the 1000s PC compatibility. The machine and its many successors were successful unlike the PCjr, partly because the Tandy 1000 was sold in ubiquitous Radio Shack stores and partly because it was less costly, easier to expand, and almost-entirely compatible with the IBM PC. The PCjr's enhanced graphics and sound standards became known as "Tandy-compatible". With its graphics, sound, and built-in joystick ports, the 1000 was the best computer for PC games until VGA graphics became popular in the 1990s.[6] Software companies of the era advertised their support for the Tandy platform;[7] 28 of 66 games that Computer Gaming World tested in 1989 supported Tandy graphics.[8]

Design and architecture

Tandy 1000 computers were some of the first IBM PC clones to incorporate a complete set of basic peripherals on the motherboard using proprietary ASICs, the forerunner of the chipset. All Tandy 1000 computers featured built-in Tandy video hardware with color graphics (CGA compatible with enhancements), enhanced sound (based on one of several variants of the Texas Instruments SN76496 sound generator), game ports compatible with those on the TRS-80 Color Computer, an IBM-standard floppy disk controller supporting two drives, and a parallel printer port, all integrated into the motherboard. This is in addition to the hardware standard on the IBM PC, PC/XT, and PC/AT motherboards: keyboard interface, expansion slots, memory subsystem, DMA, interrupt controller, and math coprocessor socket. (Hard disks were high end, not standard, equipment for home computers until the late years of the Tandy 1000 line, explaining the absence of an integrated hard disk controller from most Tandy 1000 motherboards.) An IBM PC, XT or AT would require at least 4 expansion cards for similar hardware: one video graphics adapter card, one floppy disk controller (FDC) card, one serial and parallel port card, and one sound card with a joystick port. (A third-party multi-IO card might merge the ports and FDC onto one card.) Therefore, the 5 XT slots of the original Tandy 1000, 1000 TX, 1000 SX, and similar models remained available for other hardware, making them equivalent or better than the 8 slots in IBM's XT and AT models (which had 8 slots because the original PC's 5 proved inadequate.)

The earlier models of the Tandy 1000 had a composite video output, and could be used with a color or monochrome composite monitor, or a TV with an RF modulator. The original 1000 and SX had a light-pen port. Unlike most PC clones, several Tandy 1000 computers had MS-DOS built into ROM and could boot in a few seconds. Tandy bundled DeskMate, a graphical suite of consumer-oriented applications, with various Tandy 1000 models.

The original line was equipped with the Intel 8088 CPU, which was later extended to faster clock speeds and also the 8086, 80286 and toward the end of the line with the RSX, 80386SX processors. Tandy 1000s (at least all early models) used Phoenix BIOS. Common models of the machine included the Tandy 1000, 1000 EX, 1000 HX, 1000 SX, 1000 TX, 1000 SL, 1000 RL, and 1000 TL.

Hard disk drives

Tandy 1000 computers did not feature integrated hard disk controllers until the release of the Tandy 1000 TL/2, which featured an on-board XT IDE controller. At this time hard disks were very expensive and needed only by high-performance users. However, it was possible to add a hard drive to most Tandy 1000 computers. Most of the desktop-type Tandy 1000 units could accept regular 8-bit ISA bus MFM, RLL and SCSI controllers like typical XT class machines; however, care had to be taken when configuring the cards so that they do not cause conflicts with the onboard Tandy-designed peripherals.

For most Tandy 1000 models other than the compact EX and HX that did not come already equipped with a hard drive, Tandy offered hard disk options in the form of hardcards that were installed in one of the computer's expansion slots and consisted of a controller and drive (typically a 3.5" MFM or RLL unit with a Western Digital controller) mounted together on a metal bracket. Although this arrangement provided a neat physical coupling between the controller and the disk, single-sector internal transfers and dependence on the speed of the host machine to transfer data to memory meant that a trial-and-error approach was still needed to set the disk interleave correctly to ensure optimum transfer rates. Even then, transfer rates could be as low as 40kB/s for 8088 and 8086 machines.

Starting with the Tandy 1000 TL/2, XT IDE controllers were integrated onto the motherboard. However, these are unable to support common AT IDE hard drives. The TL/2, TL/3, RL and RLX all used the XT IDE interface, where the later (and significantly upgraded) RSX was the first and only Tandy 1000 model computer to use a standard AT IDE interface.


By 1993, changes in the market made it increasingly difficult for Tandy Corporation to make a profit on its computer line. Tandy Corporation sold its computer manufacturing business to AST Computers, and all Tandy computer lines were terminated. RadioShack stores then began selling computers made by other manufacturers, such as Compaq.


Creative Computing called the original Tandy 1000 "the machine IBM was too inept, incapable, or afraid to manufacture. It is sure to put a whopping dent not only into PCjr sales, but into sales of the PC 'senior' as well", favorably mentioning its low price, good PC-software compatibility, and bundled DeskMate ("you might never need another software package for your computer").[2] InfoWorld noted the 1000s low price ("fully one-third less than a comparably equipped IBM PC"), predicted that the computer was really intended for "the elusive home computer market", and speculated that "in retrospect it might have been the PCjr's final straw". The magazine called the 1000 "almost as fully IBM PC compatible as a computer can get", but gave DeskMate a mixed review and advised customers of the computer's inability to use full-length PC expansion cards. It concluded that "By making the 1000 inexpensive and adaptable" and including DeskMate, "Tandy produced a real home computer".[5] BYTE called the 1000 "a good, reasonably priced IBM PC clone that has most of the best features of the IBM PC and PCjr ... at current prices it is a very good alternative". It noted the high level of software compatibility and the good keyboard, and stated that DeskMate was "fairly good ... but a little extra programming work could have turned [it] into a much better program", noting that—for example—the word processor did not have a Move command. The magazine also mentioned the computer's short slots.[3] PC Magazine also noted the slots and criticized the Tandy 1000's fit and finish, but acknowledged the computer's low price and bundled hardware features.[9]

Selected Tandy 1000 Models

Tandy 1000

The original Tandy 1000 was a large computer almost the size of the IBM PC, though with a plastic case over an aluminium lower chassis to reduce weight. The original Tandy 1000 featured a proprietary keyboard port (using an 8-pin DIN connector) along with 2 joystick ports (using 6-pin DIN connectors) on the front of the case. The rear featured a RGB monitor connector (a standard 9-pin female D-shell compatible with CGA/EGA monitors), an RCA-style composite video-out connector, a single RCA-style monophonic line-level audio connector, a light pen port, and an edge-card connector used to attach a parallel printer. The printer port followed the old Centronics standard and was not fully compatible with the parallel port found on PCs. The original Tandy 1000 came standard with one internal 5.25" double density floppy disk drive, with an additional exposed internal bay usable for the installation of a second 5.25" disk drive (available as a kit from RadioShack). The floppy drives used the old-fashioned method of selecting the drive number with jumpers instead of the IBM cable twist. 128 kB of memory was standard, with the computer accepting up to 640 kB of total memory with the addition of expansion cards.

MS-DOS 2.11, DeskMate 1.0, and a keyboard with the same layout as the Tandy 2000's were included with the computer. Like the PCjr. DMA was not supplied on the motherboard, but unlike the IBM system, DMA was added by a memory expansion board. While the Tandy 1000 had three XT-compatible expansion slots, early Tandy memory upgrade boards took up two of the slots to get to 640 kB. Because the slots were 11 1/2 inches in length instead of the PC's 13 inches, full-length cards did not fit,[3] but reviewers noted that the many built-in hardware features reduced the need for cards.[9]

A later revision of the original Tandy 1000 model was the Tandy 1000A. This revision fixed bugs, scanned expansion cards for bootable ROMs, and added a socket for a math coprocessor.

Tandy 1000 HD

The original Tandy 1000 (and many other models), like most home computers sold at the time, did not have a hard disk drive. The Tandy 1000 HD was essentially an original Tandy 1000 with a hard disk option factory installed. The factory hard disk had a capacity on the order of 10 or 20 MB.

Tandy 1000 EX & SX

The Tandy 1000 EX was designed as an entry-level IBM compatible personal computer. The EX was a compact computer that had the keyboard and 5.25" floppy drive built into the computer casing. The 5.25" drive was accessible on the right-hand side of the computer. The EX was marketed as a starter system for people new to computing, and sold for US $1000.00 from RadioShack in December 1986. The EX and later the HX would be among the most popular of the Tandy 1000 line because of their (relatively) low price. The EX doubled the on-board memory to 256kB.

The EX had a 7.16 MHz 8088 (capable of clocking down to 4.77 MHz) and one internal 5.25" floppy drive. An external drive could be connected to a port on the back. A useful feature for the EX and later systems is the ability to boot off either drive, as the drives can be logically swapped when the system boots, so that the drive that is normally drive B: becomes drive A:, and vice versa, and the drives remain swapped until the system is powered off or reset.

The EX was upgradable by Tandy PLUS cards, and system had bays for three. The PLUS cards' connector was electrically identical to the ISA slot connector, but used a BERG-style 62-pin connector instead of a 62-contact ISA card edge connector. The RAM could be upgraded in the EX and later the HX to 640kB, but required a PLUS memory expansion card. This card also provided DMA. Other PLUS cards could be installed to add serial ports, a 1200 baud modem, a clock/calendar and bus mouse board and a proprietary Tandy network interface.

The Tandy 1000 SX was essentially an upgraded reissue of the original Tandy 1000 with the additional features of the EX. It used a 7.16 MHz 8088-2 processor, had 384k of memory (upgradeable to 640 kB on the motherboard), came with either one or two 5.25" internal floppy disk drives, had the light pen port (not a serial port) like the original Tandy 1000. Unlike the EX, it did not have a volume dial or headphone jack, but did have an adjustable potentiometer inside the system to control the volume of the internal speaker/ The Tandy AX was a Tandy SX rebadged for sale in Wal-Mart stores. The SX/AX are drop-in compatible with NEC's V20 processor for a noticeable improvement in performance.

The 1000 EX came with MS-DOS 2.11 and Personal Deskmate on 5.25" 360 kB diskettes. The 1000 SX came with MS-DOS 3.2 and Deskmate II on 5.25" 360 kB diskettes. While Deskmate II used a text-based interface, Personal Deskmate used a graphical interface and also supported a mouse-like cursor using a joystick-mouse driver or a Tandy bus mouse. The MS-DOS was a version specialized for and only bootable on the Tandy 1000, as it would announce on the screen of any other PC-compatible one tried to boot with it; it included a version of BASICA (Microsoft's Advanced GW-BASIC) with support for the enhanced CGA graphics modes (a.k.a. Tandy Graphics or TGA) and three-voice sound hardware of the Tandy 1000.

The Tandy 1000 SX and later the TX were the first models in the Tandy 1000 line to have a built-in DMA controller. Adding the DMA chip improved the speed of diskette operations and IBM PC-compatibility of these earlier Tandy 1000 models and ensured that input from a serial port or keyboard would not be ignored during floppy drive access.

Tandy 1000 HX & TX

The Tandy 1000 HX was an updated version of the EX. It was mostly the same machine, but had two 3.5" floppy bays instead of a 5.25" one, and came with a 720kB floppy drive. It also had Tandy MS-DOS 2.11R in ROM, which could be accessed by starting the computer with no bootable disk present. By putting the basic elements of DOS and Deskmate in ROM and eliminating the memory test on startup, the HX will boot very quickly compared to other contemporary Tandy machines. System settings changed with a setup program and were stored via an EEPROM, and the system could be set to boot a program from the A: drive, boot to DOS or Personal Deskmate 2. The HX uses the same CPU and clock speeds as the EX, uses the same PLUS cards, keyboard and has the same ports as the EX. It also came with 256kB of RAM on the motherboard.

A Tandy 1000 HX, with a Tandy RGB monitor, an external 5.25 disk drive, joystick, and a Tandy DMP-133 dot matrix printer.

The 1000 EX and HX did not come with a hard drive, nor was it available from Tandy as an option, although a number of third party vendors sold them. The design of the EX and HX did not make it easy to add a hard drive, however. RadioShack eventually sold an adapter card that allowed the installation of a "Plus Card" into a standard ISA slot, such as those in the larger Tandy 1000 models. On the back of the machine there was a port which allowed a user to connect an external 360 kB 5.25" or 720 kB 3.5" floppy disk drive unit, available from Tandy. It is possible to fit an NEC V20 to a Tandy 1000 EX or HX; however, this may require disassembly of the computer.

The 1000 HX came with MS-DOS 2.11, modified to support 720kB drives and Personal Deskmate 2. Most versions of MS-DOS worked with the 1000 HX, including DOS 3.x, and some later versions. There was a quirk in the DOS 4.0 environment that prevented that version of DOS from working with Tandy 1000 HX computers.

The Tandy 1000 TX was very similar to the Tandy 1000 SX, having an external keyboard and similar casing. The major difference was the use of an 80286 CPU; otherwise, it was nearly identical to the Tandy 1000 SX, including the unique parallel port edge connector. Despite the 80286 processor, it was still an XT-class PC, not an AT-class PC, as it adapted the 80286 to operate over the same 8-bit data bus as previous Tandy 1000 models, and had 8-bit XT-style expansion slots. As such, it could not operate in 80286 protected mode or perform 16-bit memory or I/O transfers in one bus cycle, but it did benefit from the higher speed of the 80286 and its other added instructions in real mode. The TX had a 3.5" internal floppy disk drive, with an optional additional internal 5.25" floppy disk drive. It contained ports for two joysticks in the front along with the keyboard, and included a volume control with a 1/8" headphone jack on the front. The back had all of the same ports as the Tandy 1000, except that the light pen port was replaced with an RS-232 serial port. The memory size was 640k (upgradable to 768 kB, with the added 128 kB devoted to video) and the computer came bundled with Personal DeskMate 2.

Tandy 1000 SL, SL/2, TL, TL/2, TL/3

The Tandy SL and TL series of computers were updates of the SX and TX respectively. In addition to having a redesigned case and a more integrated motherboard, the SL and TL each offered improved video hardware capable of 640 × 200 × 16 graphics, on-board Hercules Graphics Card compatible monochrome video offering an effective 720 × 350 resolution, and an improved sound circuit featuring an 8-bit mono DAC/ADC. The composite video output was also dropped. The ADC/DAC, which became known as the "Tandy DAC" in games that supported it, was broadly similar in function to sound devices which connected to the parallel port (such as the Disney Sound Source), but unlike those devices it was integrated onto the motherboard, supported DMA transfers and could sample at frequencies up to 48 kHz. While the Tandy DAC's features were comparable to those offered by Creative's 8-bit Sound Blaster audio cards, unlike the Sound Blaster or the Tandy's PCjr-compatible audio the DAC never saw widespread adoption by software developers despite BIOS support. The 640 × 200 × 16 graphics mode was even more rarely used, as it was not supported by the BIOS. The SL/TL lines also allowed the onboard floppy controller, parallel port and serial ports to be disabled, which the earlier models did not.

The SL's sound/reset satellite board

The Tandy 1000 SL and SL/2 feature an Intel 8086 processor running at 8 MHz. The 8086 processor's 16-bit bus and slightly higher clock speed gave the SL series a modest, yet appreciable increase in performance over the earlier 8088-based Tandy 1000's. The SL came with 384 kB of RAM preinstalled, whereas the SL/2 offered 512 kB. Both machines can be expanded to 640 kB, although only 608 kB could typically be used by the operating system. These systems are drop-in compatible with NEC's V30 processor for a further increase in performance. The SL line have the mic/earphone ports, volume knob and reset button on a small satellite board, which has an LM386 op-amplifier, a microphone input IC and a few small passives. There is also a jumper on the board to change the microphone input to a line-level output.[10]

The Tandy 1000 TL and TL/2 use 8 MHz Intel 80286 processors, whereas the TL/3 uses a 10 MHz 80286. These computers had 640 kilobytes of memory preinstalled, with an option for an extra 128 kilobytes to be installed for use as video memory for the onboard video hardware. This extra 128 kilobytes could only be used for and by the on-board video controller, and it is impractical to expand the onboard memory beyond 640 kB if a VGA graphics card is installed. Notably, the TL/3 had a high-density floppy controller for the first time, although it only shipped with a double-density 3.5" drive. Also, the TL/2 and TL/3 feature an on-board 8-bit XT IDE interface, which was not compatible with common AT IDE hard drives. Compared to the TL, which has five expansion slots, the TL/2 and TL/3 lose an expansion slot to accommodate the XT IDE interface.

Since the SL and TL series are XT-class machines, it is impossible to install or use extended memory(XMS), although expanded memory (EMS) can be used with an 8-bit LIM EMS memory card for software that supports expanded memory.

The SL and TL were also shipped with MS-DOS 3.3 and DeskMate 3 in ROM, and featured an EEPROM memory chip to store BIOS settings (which enabled similar functionality to today's CMOS NVRAMs, so that startup options could be saved). (Earlier Tandy 1000 models, with the exception of the HX, like IBM PC and PC/XT systems, used DIP switches and jumpers for startup configuration settings.) The machines could also run 'normal' MS-DOS 3.x, 5, and 6 and Windows 2 and 3.0 operating systems, although Windows was limited to real mode operations. In common with many PC clones of the era, MS-DOS 4 was problematic and generally avoided.

Interestingly, the SL is the only machine in this lineup that offers an upper 5.25" bay (and therefore the only machine in the line to offer two 5.25" bays), which can be fitted with an adapter to seat 3.5" drives; the SL/2 and TL series feature at least one upper 3.5" bay and one lower 5.25" bay. Fitting an internal hard drive to an SL that already has two floppy drives requires either the removal of one of the floppy drives, or finding a (increasingly hard to find) hard disk card-style bracket to mount the drive in one of the ISA slots. Another (and usually less expensive) option would be to use an XT-CF card fitted with a CompactFlash adapter and memory card, though most XT-CF cards are usually sold as bare PCBs and may require soldering and additional parts and adapters (such as the beforementioned CompactFlash-to-IDE adapter) prior to using. As most modern CompactFlash memory cards offer much higher capacity than the 32MB that DOS 3.3 supports per-partition, using large-capacity memory cards may require an upgrade to the DOS operating system (or multiple 32MB partitions and possibly a disk-drive overlay program) in order to function optimally.

The TL could fit a non-Tandy MFM/RLL half-height hard drive in the 5.25" bay or a full-height drive with case removal (not supported) with an 8-bit ISA controller such as a Western Digital WD-XT GEN2.

Tandy 1000 RL, RL/HD, RLX, RSX

The Tandy 1000 RL/RLX/RSX series were slim-line desktop home computers. The RL and RL/HD featured a 9.56 MHz 8086 processor, 512 kB of RAM (expandable to 768 kB to provide 128 kB for video and 640kB conventional memory), smaller keyboard and mouse ports (which were similar to the PS/2's ports but not 100% compatible), a DB-25 unidirectional parallel port instead of the edge-connector ports, and the SL's enhanced graphics and sound. Both the RL and RL/HD included a built-in XT IDE hard drive interface and the RL/HD came with a 20mB drive preinstalled. The RL/HD had a battery-backed real time clock chip to store Date & Time information with the RL lacked. These models also had MS-DOS and a portion of DeskMate in ROM, and could therefore boot much faster than many other computers on the market.

A Tandy 1000 RL running DeskMate (optional mouse not shown)

The RLX was the 'mid-range' offering of the RL line. It had a 10 MHz 286, and unlike other 286-based Tandy 1000s, it supported up to 384 kB of extended memory. However, it was not a full AT-class machine, as it still had an 8-bit ISA bus and only 8 IRQs and 4 DMA channels. While the 3-voice sound chip and DAC were still present, Tandy video was dropped. The RLX had VGA instead, offering 256 kB of video memory and a maximum 640x480x16 (or 320x480x256) graphics resolution. Also, the RLX featured a high-density, 1.44 MB 3.5" disk drive. The RLX offered 512 kB of memory preinstalled, which could be expanded to 1 MB. (The hard disk version came with 1 MB of RAM and a 20mB hard disk preinstalled.)

The RSX offered a 25 MHz 80386SX processor, two 16-bit ISA slots, AcuMos SVGA video, an AT compatible IDE interface and standard PS/2 keyboard and mouse ports. It was a full 386-class PC, and could use up to 9 MB of memory. The RSX still retained the 3-voice sound hardware and DAC, though the I/O address for the 3-voice sound chip was moved, rendering many games previously compatible with it unable to play music unless modified. The DAC could be used to emulate the Covox Speech Thing via MS-DOS device drivers for limited sound support in MS-DOS based software. This works with the game "Chuck Yeager's Air Combat".

Windows 3.xx sound device drivers were available that works in Windows 95 (with full 9MB RAM) on Tandy 1000 RSX. The ACUMOS VGA graphics could be software updated with Cirrus Logic BIOS (via MS-DOS driver) to allow VESA/SVGA to function in Windows 95, as the Windows 3.xx Tandy VGA drivers were insufficient for Windows 95.


  1. ^ "BRIEFS". InfoWorld. 1985-02-12. p. 23. Retrieved February 27, 2011. 
  2. ^ a b Anderson, John J. (December 1984). "Tandy Model 1000; junior meets his match". Creative Computing. p. 44. Retrieved February 26, 2013. 
  3. ^ a b c Malloy, Rich (August 1985). "The Tandy 1000". BYTE (review). p. 266. Retrieved 27 October 2013. 
  4. ^ "FROM HOME TO BUSINESS: THE ECLECTIC RADIO SHACK COMPUTER LINE". InfoWorld. 1984-08-20. pp. 47–52. Retrieved May 26, 2011. 
  5. ^ a b Springer, P. Gregory (1985-06-03). "Tandy's Magnificent Concession". InfoWorld. p. 72. Retrieved 19 July 2014. 
  6. ^ Loguidice, Bill; Barton, Matt (2014). Vintage Game Consoles: An Inside Look at Apple, Atari, Commodore, Nintendo, and the Greatest Gaming Platforms of All Time. CRC Press. pp. 96–97.  
  7. ^ "Electrifying Software For Today's PC". Compute! (advertisement). June 1988. p. 23. Retrieved 10 November 2013. 
  8. ^ "The Owner's Guide to Tandy 16 Color". Computer Gaming World. August 1989. p. 14. 
  9. ^ a b Rosch, Winn L. (1985-10-15). "Cost-Conscious Computing". PC Magazine. p. 113. Retrieved 29 October 2013. 
  10. ^ Tandy faxback document #1262. 1995-04-26. Retrieved September 6, 2014. 

External links

  • RadioShack Tandy Computer Support, the official support site for Tandy Computers (product search page)
  • The Tand-Em Project, a Tandy 1000 emulator project
  • DOSBox MS-DOS, Tandy 1000, PCjr Emulator
  • MESS Multiple emulator with Tandy 1000HX support
  • Tvdog's Archive, Major archive of Tandy 1000 programs and documentation
  • Tandy 1000 BASIC Programs, Games and applications
  • The OldSkool Shrine, Tandy 1000 History And Memories
  • Tandy 1000 Webring, More Sites On The Tandy 1000
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.