World Library  
Flag as Inappropriate
Email this Article

Nitrogen Tetroxide

Article Id: WHEBN0003277261
Reproduction Date:

Title: Nitrogen Tetroxide  
Author: World Heritage Encyclopedia
Language: English
Subject: Long March 2C, NPO Energomash
Publisher: World Heritage Encyclopedia

Nitrogen Tetroxide

Dinitrogen tetroxide

CAS number 10544-72-6 YesY
PubChem 25352
ChemSpider 23681 YesY
EC number 234-126-4
UN number 1067
ChEBI CHEBI:29803 YesY
RTECS number QW9800000
Jmol-3D images Image 1
Molecular formula N2O4
Molar mass 92.011 g/mol
Appearance colourless liquid / orange gas
Density 1.44246 g/cm3 (liquid, 21 °C)
Melting point

−11.2 °C, 262 K, 12 °F

Boiling point

21.69 °C, 295 K, 71 °F

Solubility in water reacts
Vapor pressure 96 kPa (20 °C)[1]
Refractive index (nD) 1.00112
Molecular shape planar, D2h
Dipole moment zero
Std enthalpy of
+9.16 kJ/mol[2]
Standard molar
304.29 J K−1 mol−1[2]
MSDS External MSDS
EU Index 007-002-00-0
EU classification Very toxic (T+)
Corrosive (C)
R-phrases R26, R34
S-phrases (S1/2), S9, S26, S28, S36/37/39, S45
NFPA 704
Flash point Non-flammable
Related compounds
Related nitrogen oxides Nitrous oxide
Nitric oxide
Dinitrogen trioxide
Nitrogen dioxide
Dinitrogen pentoxide
 YesY (verify) (what is: YesY/N?)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Infobox references

Dinitrogen tetroxide (nitrogen tetroxide) is the chemical compound N2O4. It is a useful reagent in chemical synthesis. It forms an equilibrium mixture with nitrogen dioxide; some call this mixture dinitrogen tetroxide, while some call it nitrogen dioxide.

Dinitrogen tetroxide is a powerful oxidizer. N2O4 is hypergolic with various forms of hydrazine, i.e., they burn on contact without a separate ignition source, making them popular bipropellant rocket fuels.

Structure and properties

Dinitrogen tetroxide forms an equilibrium mixture with nitrogen dioxide.[3] The molecule is planar with an N-N bond distance of 1.78 Å and N-O distances of 1.19 Å. The N-N distance corresponds to a weak bond, since it is significantly longer than the average N-N single bond length of 1.45 Å.[4]

Unlike NO2, N2O4 is diamagnetic since it has no unpaired electrons.[5] The liquid is also colorless but can appear as a brownish yellow liquid due to the presence of NO2 according to the following equilibrium:

N2O4 2 NO2

Higher temperatures push the equilibrium towards nitrogen dioxide. Inevitably, some dinitrogen tetroxide is a component of smog containing nitrogen dioxide.


Nitrogen dioxide is made by the catalytic oxidation of ammonia: steam is used as a diluent to reduce the combustion temperature. Most of the water is condensed out, and the gases are further cooled; the nitric oxide that was produced is oxidized to nitrogen dioxide, and the remainder of the water is removed as nitric acid. The gas is essentially pure nitrogen tetroxide, which is condensed in a brine-cooled liquefier.

Use as a rocket propellant

Dinitrogen tetroxide is one of the most important rocket propellants ever developed, much like the German-developed hydrogen peroxide–based T-Stoff oxidizer used in their World War II rocket-propelled combat aircraft designs such as the Messerschmitt Me 163 Komet, and by the late 1950s it became the storable oxidizer of choice for rockets in both the USA and USSR. It is a hypergolic propellant often used in combination with a hydrazine-based rocket fuel. One of the earliest uses of this combination was on the Titan rockets used originally as ICBMs and then as launch vehicles for many spacecraft. Used on the U.S. Gemini, Apollo spacecraft and the Space Shuttle, it continues to be used on most geo-stationary satellites, and many deep-space probes. It now seems likely that NASA will continue to use this oxidizer in the next-generation 'crew-vehicles' which will replace the shuttle. It is also the primary oxidizer for Russia's Proton rocket and China's Long March rockets.

When used as a propellant, dinitrogen tetroxide is usually referred to simply as 'Nitrogen Tetroxide' and the abbreviation 'NTO' is extensively used. Additionally, NTO is often used with the addition of a small percentage of nitric oxide, which inhibits stress-corrosion cracking of titanium alloys, and in this form, propellant-grade NTO is referred to as "Mixed Oxides of Nitrogen" or "MON". Most spacecraft now use MON instead of NTO; for example, the Space Shuttle reaction control system uses MON3 (NTO containing 3wt%NO). [1]

On 24 July 1975, NTO poisoning nearly killed the three U.S. astronauts on board the Apollo-Soyuz Test Project during its final descent. This was due to a switch left in the wrong position, which allowed NTO fumes to vent out of the Apollo spacecraft then back in through the cabin air intake from the outside air after the external vents were opened. One crewmember lost consciousness during descent. Upon landing, the crew was hospitalized 14 days for chemical-induced pneumonia and edema.[6]

Power generation using N2O4

The tendency of N2O4 to reversibly break into NO2 has led to research into its use in advanced power generation systems as a so-called dissociating gas. "Cool" nitrogen tetroxide is compressed and heated, causing it to dissociate into nitrogen dioxide at half the molecular weight. This hot nitrogen dioxide is expanded through a turbine, cooling it and lowering the pressure, and then cooled further in a heat sink, causing it to recombine into nitrogen tetroxide at the original molecular weight. It is then much easier to compress to start the entire cycle again. Such dissociative gas Brayton cycles have the potential to considerably increase efficiencies of power conversion equipment. [7]

Chemical reactions

Intermediate in the manufacture of nitric acid

Nitric acid is manufactured on a large scale via N2O4. This species reacts with water to give both nitrous acid and nitric acid:

N2O4 + H2O → HNO2 + HNO3

The coproduct HNO2 upon heating disproportionates to NO and more nitric acid. When exposed to oxygen, NO is converted back into nitrogen dioxide:

2 NO + O2 → 2 NO2

The resulting NO2 (and N2O4, obviously) can be returned to the cycle to give the mixture of nitrous and nitric acids again.

Synthesis of metal nitrates

N2O4 behaves as the salt [NO+] [NO3], the former being a strong oxidant:

2 N2O4 + M → 2 NO + M(NO3)2

where M = Cu, Zn, or Sn.

If metal nitrates are prepared from NTO in completely anhydrous conditions, a range of covalent metal nitrates can be formed with many transition metals. This is because there is a thermodynamic preference for the nitrate ion to bond covalently with such metals rather than form an ionic structure. Such compounds must be prepared in anhydrous conditions, since the nitrate ion is a much weaker ligand than water, and if water is present the simple hydrated nitrate will form. The anhydrous nitrates concerned are themselves covalent, and many, e.g. anhydrous copper nitrate, are volatile at room temperature. Anhydrous titanium nitrate sublimes in vacuum at only 40 degrees C. Many of the anhydrous transition metal nitrates have striking colours. This branch of chemistry was developed by Clifford Addisson and Noramn Logan at Nottingham University in the UK during the 1960s and 1970s when highly efficient desiccants and dry boxes started to become available.

See also


External links

  • International Chemical Safety Card 0930
  • National Pollutant Inventory – Oxides of nitrogen fact sheet
  • NIOSH Pocket Guide to Chemical Hazards: Nitrogen tetroxide
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.