World Library  
Flag as Inappropriate
Email this Article


Article Id: WHEBN0000231506
Reproduction Date:

Title: Varicap  
Author: World Heritage Encyclopedia
Language: English
Subject: Diode, Variable capacitor, Electronic symbol, Radio transmitter design, JIS semiconductor designation
Collection: Capacitors, Diodes
Publisher: World Heritage Encyclopedia


Varicap diode
Internal structure of a varicap
Type Passive
Pin configuration anode and cathode
Electronic symbol

In electronics, a varicap diode, varactor diode, variable capacitance diode, variable reactance diode or tuning diode is a type of diode designed to exploit the voltage-dependent capacitance of a reversed-biased p–n junction.


  • Applications 1
  • Operation 2
  • Use in a circuit 3
    • Tuning circuits 3.1
    • Switching 3.2
  • Harmonic multiplication 4
  • Substitutes for varicap diodes 5
  • See also 6
  • References 7
  • Further reading 8
  • External links 9


Varactors are used as voltage-controlled capacitors. They are commonly used in voltage-controlled oscillators, parametric amplifiers, and frequency multipliers. Voltage-controlled oscillators have many applications such as frequency modulation for FM transmitters and phase-locked loops. Phase-locked loops are used for the frequency synthesizers that tune many radios, television sets, and cellular telephones.

The varicap was developed by the Pacific Semiconductor subsidiary of the Ramo Wooldridge Corporation who received a patent for the device in June 1961.[1] The device name was also trademarked as the "Varicap" by TRW Semiconductors, the successor to Pacific Semiconductors, in October 1967. This helps explain the different names for the device as it came into use.


Operation of a varicap

Varactors are operated in a reverse-biased state. No current flows, but since the thickness of the depletion zone varies with the applied bias voltage, the capacitance of the diode can be made to vary. Generally, the depletion region thickness is proportional to the square root of the applied voltage; capacitance is inversely proportional to the depletion region thickness. Thus, the capacitance is inversely proportional to the square root of applied voltage.

All diodes exhibit this phenomenon to some degree, but varactor diodes are manufactured specifically to exploit this effect and increase the capacitance (and thus the range of variability), whereas most ordinary diode fabrication strives to minimize the capacitance.

The figure shows an example of a cross section of a varactor with the depletion layer formed of a PN junction. This depletion layer can also be made of a MOS or a Schottky diode. This is very important in CMOS and MMIC technology.

Use in a circuit

Tuning circuits

Generally the use of a varicap diode in a circuit requires connecting it to a tuned circuit, usually in parallel with any existing capacitance or inductance.[2] Because a DC voltage must be applied reverse bias across the varicap to alter its capacitance, this must be blocked from entering the tuned circuit. This is accomplished by placing a DC blocking capacitor with a capacitance about 100 times greater than the maximum capacitance of the varicap diode in series with it and applying the DC from a high impedance source to the node between the varicap cathode and the blocking capacitor as shown in the upper left hand diagram, right.

Varicap circuits

Since no significant DC current flows in the varicap, the value of the resistor connecting its cathode back to the DC control voltage can be somewhere in the range of 22KΩ to 150KΩ and the blocking capacitor somewhere in the range of 5-100nF. Sometimes, with very high-Q tuned circuits, an inductor is placed in series with the resistor to increase the source impedance of the control voltage so as not to load the tuned circuit and decrease its Q.

A second circuit using two back-to-back (cathode to cathode), series-connected varicap diodes (shown lower-left in the image) is another common configuration. The second varicap effectively replaces the blocking capacitor in the first circuit. This reduces the overall capacitance and the capacitance range by half, but possesses the advantage of reducing the AC component of voltage across each device and symmetrical distortion should the AC component possess enough amplitude to bias the varicaps into forward conduction.

When designing tuning circuits with varicaps it is usually good practice to maintain the AC component of voltage across the varicap at a minimal level, usually less than 100mV peak to peak, to prevent this changing the capacitance of the diode too much and thus distorting the signal and adding harmonics to it.

One remaining circuit, right, depicts two series connected varicaps being used in a circuit with separate DC and AC signal ground connections. The DC ground being depicted as the traditional ground symbol, and the AC ground being depicted as a triangle. Separation of grounds is often done to prevent high-frequency radiation from the low-frequency ground node or DC currents in the AC ground node upsetting biasing and operating points of active devices such as varicaps and transistors.

These circuit configurations are quite common in television tuners and electronically tuned broadcast AM and FM receivers, as well as other communications equipment and industrial equipment. Early varicap diodes usually required a reverse voltage range of 0–33v to obtain capacitance range, which was quite small, approximately 1–10pF. These types were and are still extensively used in television tuners, whose high carrier frequencies require only small changes in capacitance.

In time, varicap diodes were developed which exhibited very large capacitance ranges, 100–500pF, with relatively small changes in reverse bias: 0–5 or 0–12v. These newer devices allow electronically tuned AM broadcast receivers to be realized as well as a multitude of other functions requiring large capacitance changes at lower frequencies, generally below 10 MHz. Some of designs of electronic security tag readers used in retail outlets require these high capacitance varicaps in their voltage-controlled oscillators.

Australian market band I-III-U television tuner with varicaps highlighted
Consumer AM-FM broadcast tuner with varicaps highlighted

The three leaded devices depicted at the top of the page are generally two common cathode connected varicaps in a single package. In the consumer AM/FM tuner depicted at the right, a single dual-package varicap diode adjusts both the passband of the tank circuit (the main station selector), and the local oscillator with a single varicap for each. This is done to keep costs down – two dual packages could have been used, one for the tank and one for the oscillator, four diodes in all, and this was what was depicted in the application data for the LA1851N AM radio chip. Two lower-capacitance dual varactors are used in the FM section which operates at a frequency about one hundred time greater and are highlighted by red arrows. In this case four diodes are used, one dual package each for the tank/bandpass filter and the local oscillator.


Special types of varicap diode exhibiting an abrupt change in capacitance can often be found in consumer equipment such as television tuners, which are used to switch radio frequency signal paths. When in the high capacitance state, usually with low or no bias, they present a low impedance path to RF, whereas when reverse biased their capacitance abruptly decreases and their RF impedance increases. Although they are still slightly conductive to the RF path, the attenuation they introduce decreases the unwanted signal to an acceptably low level. They are often used in pairs to switch between two different RF sources such as the VHF and UHF bands in a television tuner by supplying them with complementary bias voltages. The fourth device from the left in the picture at the head of this page is one such device.

Harmonic multiplication

In some applications, such as harmonic multiplication, a large signal amplitude AC voltage is applied across a varicap to deliberately vary the capacitance at signal rate and generate higher harmonics which are filtered off and used further down the signal chain. This happens because when the capacitance of a charged capacitor is reduced, the voltage across it is increased which, in turn further reduces the capacitance if it is a varicap.

The energy stored on a charged capacitor is given by E=CV2/2 thus if E is constant, but C is reduced then V must increase, thus if a sine wave of sufficient amplitude is applied across a varicap it gets "peaked" into a more triangular shape, and odd harmonics are generated.

This was one early method used to generate microwave frequencies of moderate power, 1–2 GHz at 1–5 watts, from about 20 watts at a frequency of 3-400 MHz before adequate transistors had been developed to operate at this higher frequency. This technique is still used to generate much higher frequencies, in the 100 GHz–1THz range, where even the fastest GaAs transistors are still inadequate.

Substitutes for varicap diodes

Experimentation with the varicap effect need not remain in the realms of advanced electronics or solid state physics labs. All semiconductor junction devices exhibit the effect, some to a surprising degree. Although many common devices exhibit the effect, they are not designed for that purpose so the effect can vary widely between one batch of a certain device and another.

The Philips BA 102 varicap and a common rectifier diode, the 1N5408, exhibit similar changes in junction capacitance, with the exception that the BA 102 possesses a specified set of characteristics in relation to junction capacitance (whereas the 1N5408 does not) and the "Q" of the 1N5408 is less. However individual 1N5408s can be tested for their suitability for use as varicaps prior to insertion into a circuit. Both the specific devices exhibit a reduction in capacitance from around 110pF at 0v bias to 60pF at -5v bias. This is almost a halving in capacitance, allowing construction of a VCO which is adjustable over a full octave of frequency. The voltage-capacitance relationship of the 1N5408 is quite different from that of the BA 102, and it is quite easy to forward bias the 1N5408, so the amplitude of the applied AC must be maintained below 200mV peak. Placing multiple devices in parallel will multiply the effect by the number of devices used, so 3 1N5408s will vary in total capacitance from around 180pF at -5v bias to 330pF at 0v bias.

Popular makeshift varicaps include LEDs,[3] 1N400X series rectifier diodes,[4] Schottky rectifiers and various transistors used with their collector-base junctions reverse biased,[5] particularly the 2N2222 and BC547. Reverse biasing the emitter-base junctions of transistors also is quite effective as long as the AC amplitude remains small. Higher-current devices with greater junction area tend to possess higher capacitance.

Before the development of the varicap, motor driven variable capacitors or saturable-core reactors were used as electrically controllable reactances in the VCOs and filters of equipment like World War II German spectrum analyzers.

See also


  1. ^ Patent number 2,989,671
  2. ^ Varactor Circuits
  3. ^ LEDs as Varicaps
  4. ^ Rectifier Diodes As Varicaps
  5. ^ John Linsley Hood (1993). The Art of Linear Electronics. Elsevier. p. 210.  

Further reading

  • Mortenson, Kenneth E. (1974). Variable capacitance diodes: the operation and characterization of varactor, charge storage and PIN diodes for RF and microwave applications. Dedham, Mass.: Artech House.
  • Penfield, Paul and Rafuse, Robert P. (1962). Varactor applications. Cambridge, M.I.T. Press.

External links

  • Learning by Simulations Calculation of the characteristics of a varactor diode for various doping profiles
  • [2] Trimless IF VCO: Part 1: Design Considerations from Maxim.
  • Basics of varactor diode with design tips

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.